• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.22-28
• /
• 2017

Ginger was steamed at $121^{\circ}C$ and $1.5lb/in^2$ for 30 min, dried at $60^{\circ}C$ for 12 h, and each step was repeated nine times. During processing, the lightness ($L^*$ value) and yellowness ($b^*$ value) decreased from $85.65{\pm}0.33$ and $26.99{\pm}0.20$ in the non-treated ginger to $56.91{\pm}0.25$ and $16.69{\pm}0.06$ in ginger treated for the ninth treatment. On the other hand, redness ($a^*$ value) increased from $-1.51{\pm}0.03$ to $7.34{\pm}0.08$ on the eight treatment and then decreased to $7.21{\pm}0.04$ on the ninth theatment. The contents of 6-gingerol decreased from $3.257{\pm}0.067mg/g$ in the non-treated ginger to $0.567{\pm}0.036mg/g$ on the theatment, whereas the contents of 6-shogaol increased from $1.299{\pm}0.050mg/g$ to $2.999{\pm}0.089mg/g$ on the sixth treatment and decreased to $2.099{\pm}0.039$ on the ninth treatment. The contents of 10-gingerol decreased slightly from $1.106{\pm}0.125mg/g$ to $0.806{\pm}0.026mg/g$. Unlike the 6- and 10-gingerol, the contents of 8-gingerol did not change greatly, with values between $0.916{\pm}0.005mg/g$ and $1.106{\pm}0.005mg/g$ being observed during processing. The tyrosinase inhibitory activities were increased from $43.42{\pm}11.45%$ in the non-treated ginger to 100% on the sixth treatment and then decreased to $51.98{\pm}7.36%$ on the theatment. The antioxidative activity was retained during processing.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.103-109
• /
• 2010

Anaerobic digestion has been widely used for the treatment of sludge, which is generated from the municipal and industrial wastewater treatment, for its volume reduction and methane production. Many researches on sludge pre-treatment have been carried out in order to enhance the performance of anaerobic digestion by increasing the hydrolysis of sludge which is the rate limiting step of anaerobic digestion. In this study, the effect of pre-treatment on sludge hydrolysis(solubilization), methane production and sludge reduction by anaerobic digestion after thermal, ultrasonic, and thermal-alkali sludge treatment were compared. Thermal-alkali treatment showed 67 and 70% solubilization with municipal and industrial wastewater sludge, respectively, while ultrasonic treatment and thermal treatment gave similar solubilization efficiency of 40% or more. Methane content of the anaerobic digestion gas reached 45~70% and pretreated sludge gave higher methane content than the control sludge. Methane production of thermal, ultrasonic, and thermal-alkali pre-treatment gave 2.6, 2.7, 3.5 times of municipal control sludge and 3.5, 4.1, 4.2 times of industrial control sludge, respectively. Sludge reduction of pre-treated sludge after anaerobic digestion gave 5~19% point higher than that of control sludge, and thermal-alkali treatment showed higher reduction efficiency than thermal and ultrasonic treatment. The results proved that pre-treatment contributed significantly not only for the methane production but also for the cost reduction of sludge treatment and disposal, and thermal-alkali treatment gave the best performance for the sludge treatment.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.928-935
• /
• 2001

In this study, two kinds of activated carbon fibers were prepared from PAN-based stabilized fibers by physical activation with steam. The variations in specific surface area, amount of iodine adsorption and pore size distribution of the activated carbon fibers after the activation process were discussed. The activated carbon fibers were prepared by two different methods, namely a 1- and 2-step method. For the 2-step method, carbonization of fibers in $N_2$ atmosphere was carried out to make carbon fibers and then activated by steam. In normal two step steam activation, BET surface area of about $1019m^2/g$ was obtained in the study. In the 1-step steam activation process, the carbonization and activation were simultaneously carried out. In the one step steam activation, BET surface area of $1635m^2/g$ was obtained after heat-treatment at $990^{\circ}C$. However, nitrogen adsorption isotherms for oxidized PAN based activated carbon fibers that were prepared by both methods were type I in the Brunauer-Deming-Deming-Teller (BDDT) classification even though they have different BET surface areas, amounts of iodine adsorption and pore size distributions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.214.2-214.2
• /
• 2013

Device performance for the 45 and 32 nm node CMOS technology requires the integration of ultralow-k materials. To lower the dielectric constant for PECVD and spin-on materials, partial replacement of the solid network with air (k=1.01) appears to be more intuitive and direct option. This can be achieved introducting of second "labile" phase during depositoin that is removed during a subsequent UV curing and annealing step. Besides, with shrinking line dimensions the resistivity of barrier films cannot meet the International Technology Roadmap for Semiconductors (ITRS) requirements. To solve this issue self-forming diffusion barriers have drawn attention for great potential technique in meeting all ITRS requirments. In this present work, we report a Cu-V alloy as a materials for the self-forming barrier process. And we investigated diffusion barrier properties of self-formed layer on low-k dielectrics with or without UV curing treatment. Cu alloy films were directly deposited onto low-k dielectrics by co-sputtering, followed by annealing at various temperatures. X-ray diffraction revealed Cu (111), Cu (200) and Cu (220) peaks for both of Cu alloys. The self-formed layers were investigated by transmission electron microscopy. In order to compare barrier properties between V-based interlayer on low-k dielectric with UV curing and interlayer on low-k dielectric without UV curing, thermal stability was measured with various heat treatment temperature. X-ray photoelectron spectroscopy analysis showed that chemical compositions of self-formed layer. The compositions of the V based self-formed barriers after annealing were strongly dominated by the O concentration in the dielectric layers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.307.2-307.2
• /
• 2016

In this study, we synthesized Au nanoparticles (AuNPs) in polyacrylonitrile (PAN) thin films using a simple annealing process in the solid phase. The synthetic conditions were systematically controlled and optimized by varying the concentration of the Au salt solution and the annealing temperature. X-ray photoelectron spectroscopy (XPS) confirmed their chemical state, and transmission electron microscopy (TEM) verified the successful synthesis, size, and density of AuNPs. Au nanoparticles were generated from the thermal decomposition of the Au salt and stabilized during the cyclization of the PAN matrix. For actual device applications, previous synthetic techniques have required the synthesis of AuNPs in a liquid phase and an additional process to form the thin film layer, such as spin-coating, dip-coating, Langmuir-Blodgett, or high vacuum deposition. In contrast, our one-step synthesis could produce gold nanoparticles from the Au salt contained in a solid matrix with an easy heat treatment. The PAN:AuNPs composite was used as the charge trap layer of an organic nano-floating gate memory (ONFGM). The memory devices exhibited a high on/off ratio (over $10^6$), large hysteresis windows (76.7 V), and a stable endurance performance (>3000 cycles), indicating that our stabilized PAN:AuNPs composite film is a potential charge trap medium for next generation organic nano-floating gate memory transistors.

• 한국약용작물학회:학술대회논문집
• /
• 2011.09a
• /
• pp.31-45
• /
• 2011

The amyloid ${\beta}$-peptide ($A{\beta}$), which originates from the proteolytic cleavage of amyloid precursor protein (APP), plays a central role in the pathogenesis of Alzheimer's disease (AD). Mounting evidence indicates that different species of $A{\beta}$, such as $A{\beta}$ oligomers and fibrils, may contribute to AD pathogenesis via distinct mechanisms at different stages of the disease. Importantly, elevation and accumulation of soluble $A{\beta}$ oligomers closely correlate with cognitive decline and/or disease progression in animal models of AD. In agreement with these studies, oligomers of $A{\beta}$ have been shown to directly affect synaptic plasticity, a neuronal process that is known to be essential for memory formation. Our previous studies showed that $A{\beta}$ induces the breakdown of phosphatidylinositol 4,5-bisphosphate (PI(4,5)P2), a phospholipid that regulates key aspects of neuronal function. PI(4,5)P2 breakdown was found to be a key step toward synaptic and memory dysfunction in a mouse model of AD. To this end, we seek to identify small molecules that could elevate the levels of PI(4,5)P2 and subsequently block $A{\beta}$ oligomer-induced breakdown of PI(4,5)P2 and synaptic dysfunction.. We found that (20S)Rg3, an active triterpene glycoside from heat-processed ginseng, serves as an agonist for phosphatidylinositol 4-kinase IIalpha (PI4KIIalpha), which is a lipid kinase that mediates a rate-limiting step in PI(4,5)P2 synthesis. Consequently, (20S)Rg3 stimulates PI(4,5)P2 synthesis by directly stimulating the activity of PI4KIIalpha. Interestingly, treatment of a mouse model of AD with (20S)Rg3 leads to reversal of memory deficits. Our data suggest that the PI(4,5)P2-promoting effects of (20S)Rg3 may help mitigate the cognitive symptoms associated with AD.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.1
• /
• pp.45-50
• /
• 2017

Using the relatively low-cost, far-infrared dryer inhibiting the destruction of a variety of physiologically active components of the mulberry fruit, we have studied to make semidry mulberry fruit that can be kept at room temperature for a long time. By adjusting the temperature of the far-infrared dryer step-by-step, we developed a semi-dry method of maintaining the shape of the mulberry fruit. In addition, by drying the coating of honey after removing the juice generated by the mulberry fruit thawing process improved the acceptability of the taste of fruit. We conducted heat treatment mulberry fruit into a $95^{\circ}C$ infrared dryer 5 hours to thaw the frozen mulberry fruit. After 10 to 20% of honey coating, the primary drying ($95^{\circ}C$, 5 hours) was implemented. then, the secondary drying was conducted after controlling the temperature of the far infrared dryer $60^{\circ}C$, for 10 hours. These manufacture process was able to obtain semi-dried mulberry fruit. Dry weight ratio and moisture content were around 25%, and around 16% level respectively. It was to enable long-term storage at room temperature. Therefore, it is suggested that the method of using the far-infrared drying machine to manufacture semi-dried mulberry fruit can be a way to improve the farm income if applied to the farm.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.357-363
• /
• 1994

The irradiation growth of the Zircaloy-4 cladding in the KOFA fuel loaded in the Kori-2 nuclear plant was measured to evaluate the irradiation growth behavior and to be compared with that of the Siemens cladding having different manufacturing process. Due to the partial recrystallization by final heat treatment, the KOFA Zircaloy-4 cladding showed a two step irradiation growth behavior such as the growth saturation and the accerlation which is typical of the fully annealed Zircaloy cladding. The difference in the measured irradiation growth rate between the KOFA and the Siemens cladding could be explained by the difference in the cladding texture which depends on the manufacturing process. From the measured irradiation growth data of Kori-2 KOFA fuel, a two-step irradiation growth model of the KOFA Zircaloy-4 cladding was derived, the accuracy of which can be more clearly verified as the measured data of the irradiation growth are accumulated in the future.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.619-627
• /
• 2001

n order to increase the virus safety of a human intravenous immunoglobulin (IVIg) that was manufactured by a successive process of cold ethanol fractionation, polyethylene glycol precipitation, and pasteurization ($60^{\circ}C$ heat treatment for 10h), a low pH incubation process (pH 3.9 at $25{\circ}C$ for 14 days) was employed as the final step. The efficacy and mechanism of the fraction III cold ethanol fractionation, pasteurization, and low pH treatment steps in the removal and/or inactivation of blood-borne viruses were closely examined. A variety of experimental model viruses for human pathogenic viruses, including the Bovine herpes virus (BHV), Bovine viral diarrhoea virus (BVDV), Murine encephalomyocarditis virus (EMCV), and Porcine parvovirus (PPV), were selected for this study. The mechanism of reduction for the enveloped viruses (BHV and BVDV) during fraction III fractionation was both inactivation and partitioning, however, it was partitioning in the case of the nonenveloped viruses (EMCV and PPV). The log reduction factors achieved during fraction III fractionation were ${\geqq}$6.7 for BHV, ${\geqq}4.7$ for BVDV, 4.5 for EMCV, and 4.4 for PPV. Pasteurization was found to be a robust and effective step in inactivating all the viruses tested. The log reduction factors achieved during the pasteurization process were ${\geqq}7.5$ for BHV, ${\geqq}4.8$ for BVDV, 3.0 for EMCV, and 3.3 for PPV. A low pH incubation was very effective in inactivating the enveloped viruses as well as EMCV. The log reduction factors achieved during low pH incubation were ${\geqq}7.4$ for BHV, ${\geqq}3.9$ for BVDV, 5.2 for EMCV, and 2.0 for PPV. These results indicate that the low pH treatment successfully improved the viral safety of the final products.

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.560-565
• /
• 2014

Alumina nano-asperites were grown on plate-like alumina particles of which the surface had been covered with a capping agent to control the asperite formation sites on the particles. Utilized alumina source for asperite was nano sized ${\gamma}$-alumina, which was prepared by calcination of $Al(OH)_3$ at $600^{\circ}C$; silica suspension was used as the capping agent. Plate like alumina particles were covered by silica suspension and continuously heat-treated to $900^{\circ}C$ with nano sized ${\gamma}$-alumina, as the source material, under molten-salt atmosphere. Asperite growing site were controlled by the degree of coating of the capping agent; 10-20 nanosize of ${\theta}$-alumina were formed on the particle surface. On the other hand, alumina particles without capping agent were observed to undergo only step-like crystal growth during heat-treatment.