• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.932-938
• /
• 2001

This study is concerned with the shape optimization of stem for the artificial hip prosthesis with unbonded cement mantle. The artificial hip prosthesis with unbonded cement mantle allows a stem to slip on cement mantle because of polished stem surface. Unbonded cement mantle type has several advantages compared with bonded cement mantle type, for example, small micro motion, preventing stress shielding and so on. In this study, 2-dimensional axisymmetric model was developed with considering characteristics of unbonded cement mantle. Moreover, optimal shape of stem was obtained by using feasible direction method. The objective of this optimization is maximizing supported vertical loading. The slip motion and stresses of stem, cement mantle and bone is used for constraints. The optimal shape which obtained by this study has slope of 0.15 in proximal part and maintains the width about 5mm in distal part In addition, simplified 3-dimensional analysis which applying optimal shape is carried out. The result of 3-dimensional analysis showed that optimal shape has some advantages for cement mantle stress. However, more realistic 3-dimensional analysis which including bending effect, complex geometries etc. is needed in further research.

• International Journal of Ocean System Engineering
• /
• 제3권3호
• /
• pp.152-157
• /
• 2013

This study, a new concept design of the stem and aims to determine the suitability of various carbon/PEEK composite designs for artificial hip joints. Shear stress tested with alternative materials of the Ti-based stem for artificial hip joints. In addition, FEA is conducted according to the fiber ply orientation and the load condition for carbon/PEEK composites. The stem shape of two types was designed through the shape normal of the femur. Multidirectional load cases were used for each FEA model. In the case of general shape, the results show that the stress of ply orientation case II was lower than for cases I and III. On the other hand, in the case of the curved shape, ply orientation case I was lowest. In the case of the Ti stem, the stress of the curved shape was 18% lower than the general shape.

• Agricultural and Biosystems Engineering
• /
• 제6권2호
• /
• pp.70-76
• /
• 2005

Seed, stem and sprout of F. tataricum were separately milled using the ultra fine mill under the same condition to investigate the effect of roasting or extruding on the particle size, microstructure and water solubility of dietary fiber. The mean particle size of MR (roasting) is increased in stem and sprout, and that of ME (extruding) is increased in seed, compared to that of control. The microscopic views of seed show that control has the spherical shape but ME the larger and irregular shape, and those of stem and sprout show that control has the needle like shape but ME more rounded shape. Water solubility index of ME is much higher than that of control or MR in seed, stem and sprout. It shows that seed, stem and sprout are damaged more in extruding than in roasting, and the starch and cell wall structure must be destroyed to change the water insoluble dietary fiber into the water soluble dietary fiber.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.651-652
• /
• 2006

The choice of suitable hip implant is one of important factors in total hip replacement (THR). In clinical view points, improper adaptation of hip implant might cause abnormal stress distribution to the bone, which can shorten the lifespan of replaced hip implant. Currently, interest in custom-designed hip implants has increased as studies reveals the importance of geometric shape of patient's femur in modeling and designing custom hip implants. In this study, we have developed the custom-designed hip implant models with various sizes in hip implant, and the stress distribution in the bone was analyzed using Finite Elements methods. It was found that minimizing the gap between implant stem and femoral cavity is crucial to minimize stress concentration in the bone.

• 식물분류학회지
• /
• 제33권4호
• /
• pp.393-409
• /
• 2003

한국산 골풀아재비속 3종을 대상으로 외부형태학적 형질을 재검토하였다. 줄기와 잎의 단면, 및 수과와 잎의 표피형을 광학현미경과 주사전자현미경(SEM)을 사용하여 비교분석하였다. 줄기, 잎, 잎싸개, 포, 꼬마이삭, 비늘조각, 수과의 길이와 너비, 암술머리의 수, 꼬마이삭, 비늘조각, 수과의 모양 등의 외부형태형질과 줄기와 잎의 횡단모양, 유관속의 수, 수과의 표피 세포의 모양, 잎표피의 규소체의 형태, 기공복합체의 빈도, 부세포의 모양 등의 미세형태형질이 이들 분류군의 유용한 분류형질이었다. 이상의 결과를 토대로 검색표를 작성하였다.

• 한방안이비인후피부과학회지
• /
• 제16권3호
• /
• pp.164-184
• /
• 2003

Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Pogostemonis and Agastachis Herba. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results : 1. The external characteristics: Pogostemon cablin has hairs and brown-like in stem, elliptical fruit. On the other hand, Agastache rugosa has no hairs and red-like in stem, obovatic trigone fruit. 2. The physical characteristics: Pogostemon cablin is gray in whole, has hairs in stem and numerous hairs of ash in leaf. On the other hand, Agastache rugosa is yellow-green in whole, has no hairs in stem. Specially the latter has deep-green colour and numerous hairs presenting mostly at lower epidermis in leaf. 3. The physical characteristics in currents: Pogostemon cablin is brown, has hairs and round-like stem. On the other hand, Agastache rugosa is green or yellow-green, has no hairs and tetragon in stem. 4. The internal characteristics: Pogostemon cablin has progressed spongy tissue in epidermal cell of leaf and many rank of epidermal cell in stem. On other hand, Agastache rugosa has I rank palisade tissue in leaf and few rank of epidermal cell in stem. In the external shape, it was possible that herbs were distinguished according to artificial cIassification and that same genus-degree of relatedness among herbs could be distinguished by more precise and active observation. In the shape of real herbs, I compared current herbs in market with original herbs which were just collected or were on the course of drying. In addition, it was possible that the internal shape could be identified by using microscope after butanol series. Conclusion : Though it was impossible to make distinction of herbs which are not current in my search contents, this search contents will be a standard for applying herbs in the future. An Additional standard establishment including physiochemical reaction and gene research is required in order to supplement the fault of this search.

• 식물분류학회지
• /
• 제32권3호
• /
• pp.301-338
• /
• 2002

한국산 사초속 사초아속(Eucarex Cross & Germ.) 피사초절(section Rhomboidales Nees) 4종과 그늘사초절(section Digitatae Fr.) 7종을 대상으로 외부형태학적 형질을 재검토하고, 광학현미경과 주사전자현미경을 사용하여 과낭, 수과와 잎의 표피형을 비교 분석하였다. 그 결과 얻어진 정량적 형질(줄기, 잎, 이삭, 비늘조각, 포, 과낭과 수과의 길이와 너비, 포의 수)과 정성적 형질(이삭, 비늘조각, 과낭과 수과의 모양, 엽설의 유무, 줄기단면과 비늘조각 윗부분의 모양) 및 과낭, 수과와 잎의 표피형(기본표피세포모양, 세포벽의 굴곡, 규소체의 수와 모양, 기공복합체의 크기와 빈도, 부세포의 모양)이 종을 동정, 식별하는데 유용하였다. 본 연구 결과 잎, 줄기, 암꽃 비늘조각과 과낭의 길이, 과낭부리 모양과 부리 표피형이 피사초절과 그늘사초절을 나누는 유용한 형질이 되었다. 그리고 외부형태학적 특징이 유사하여 동정에 어려움이 있어온 가는잎그늘사초(C. humilis Leyss.)와 그늘사초(C. lanceolata Boott.)는 줄기의 길이, 엽설의 유무, 줄기 단면모양과 과낭, 수과와 잎의 표피형에서 차이를 보여 두 종을 식별할 수 있었다. 또한 넓은잎그늘사초(C. pediformis C. A. Meyer)를 그늘사초(C. lanceolata Boott)의 아종이나 변종으로 취급하는 등 학명사용에 혼란이 있어 왔으나 과낭과 수과의 모양, 줄기 단면의 모양과 과낭, 수과와 잎의 표피형에서 뚜렷히 구분되어 각각 다른 종으로 취급하였고 학명과 국명을 정리할 수 있었다.

• Journal of International Society for Simulation Surgery
• /
• 제4권1호
• /
• pp.1-8
• /
• 2017

In the field of tissue engineering, researches have been actively conducted to regulate stem cell fate by understanding the interaction between cell and materials. This approach is expected as a promising therapeutic method in the future medicine by utilizing differentiation of stem cells into desired cells or tissues using biomaterial. For this regenerative medicine, there exist lots of attempts to construct optimized structures of various shapes and sizes that can regulate the stem cell fate. In this review, we will empathize the topographic effect as stem cell niche on the mesenchymal stem cell (MSC) response (cell attachment, proliferation, and differentiation) according to the shape and size of the structure of the substrates, and comprehensively analyze the importance and the effect of shape and size of the surface topography.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.927-928
• /
• 2012

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2168-2177
• /
• 2006

The purpose of this investigation was to determine the specific fracture mechanics response of cracks that initiate at the stem-cement interface and propagate into the cement mantle. Two-dimensional finite element models of idealized stem-cement-bone cross-sections from the proximal femur were developed for this study. Two general stem types were considered; Rectangular shape and Charnley type stem designs. The FE results showed that the highest principal stress in the cement mantle for each case occurred in the upper left and lower right regions adjacent to the stem-cement interface. There was also a general decrease in maximum tensile stress with increasing cement mantle thickness for both Rectangular and Charnley-type stem designs. The cement thickness is found to be one of the important fatigue failure parameters which affect the longevity of cemented femoral components, in which the thinner cement was significantly associated with early mechanical failure for shot-time period.