• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.05a
• /
• pp.38-44
• /
• 2000

To determine the optimum sowing date and nursery period in Alisma piantago in the southern area of Korea, Alisma plantago local cultivar was grown under three different sowing dates and nursery periods. The plant height, leaf width and leaf length at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 12.1cm, 2.5cm and 3.1cm respectively and it shows tess decrease than that of plant height, leaf width and leaf length with 12.3cm, 2.6cm and 3.2cm respectively which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows less decrease than that of plant height, leaf width and leaf length with 15.2cm, 3.1cm and 5.2cm respectively at the area sown on the seedbed in July 10 and condected the growing seedling in the same date. The stem length, number of stems and diameter of root at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 31cm, 11 and 3.7cm respectively and it shows more increase than that of stem length, number of stem and diameter of and on the other hand shows tess decrease than that of stem length, number of stems and diameter of root with 30cm, 10cm, 35cm respectively which was sown on the seedbed in 30 days, and on the other hand shows less decrease than that of stem length, number of stems and diameter of root with 32cm,13cm,3.9cm respectively at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date, The fresh yield of roots at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 431.4Kg/10a and it shows more increase of 26.9Kg than that of fresh yield of root with 410.59g110a which was sown on the seedbed in lune 20an4 carried out the growing seedling in 30 days, and it also shows more increase of 7Kg than that of fresh yield of root with 430.4Kg/10a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. The dry yield of roots at the area on the seedbed in June 30 and conducted the growing seedling in 30 days is 351.9Kg110a which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows more increase of 16.4Kg than that of dry yield of root with 335.4Kg110a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. Therefore, the seedling period of proper seedbed for high yield bumper crop of Alisma plantago for exporting to Japan is June 30 and the number of days for seedling is 30 days.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.3
• /
• pp.45-52
• /
• 1993

Surveyed results on the slope of grain and the twist of sawn lumber of Pinus koraiensis, Larix leptolepis, and Pinus densiflora were summarized as follows: 1. The slope of grain of Pinus koraiensis has a Z-grain in the stem axis. The slope of grain was found to be the lowest at near to the pith and then constantly increased. At the height of 0.2m from the base of stem. a cross section of 35 annual rings was found to have a repeatedly increasing and decreasing slope of grain and then constantly decreased. At the height of 1.2m to 7.2m from the base of stem, the slope of grain increased conspicuously until the 10th annual ring, after which it increased near to the bark with repeatedly increasing and decreasing trends. 2. Pinus densiflora has a S-grain in the stem axis. The lowest slope of grain was found at near to the pith, and the highest in the 10 to 35 annual rings from the pith. 3. Larix leptolepis has a S-grain. At the height of 3.2m from the base of stem, the big fluctuation of the slope of grain was found without any particular trend. 4. The slope of grain and the twist between natural and reforested timber of Pinus koraiensis were found to be almost the same trend in viewpoint of the annual ring. The maximum slope of grain of imported Siberian timber of Pinus koraiensis was found at the 10 annual rings, which was quite similar to that of native species in Korea, but the big difference of the twist was found at 140 annual rings. 5. The twist was little at the mature wood of reforested Pinus koraiensis and Siberians and the duplicated part of mature and juvenile woods of those. On the contrary, the twist was great at the duplicated part of mature and juvenile woods of Pinus koraiensis. 6. The twist of Larix leptolepis showed the S-direction which coincided with that of slope of grain. The twist was greatest at the part of juvenile wood and little at the duplicated part of mature and juvenile woods, and little difference of twist was found between mature and juvenile woods. 7. Siberian larix having a minimum slope of grain showed the lowest twist, and the twist at the duplicated part of mature and juvenile woods showed a middle level of both mature and juvenile woods' portions.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.104-109
• /
• 2019

The crops recommended for the plant factory system are diverse. The importance of planting density in the plant factory is being recognized. The objective of this study was to determine the optimal planting density for growth and quality of kohlrabi in a closed-type plant factory system. The kohlrabi was grown under fluorescent lamps and nutrient film technique system. The growth and quality of kohlrabi were investigated under four different planting densities ($22plants/m^2(15{\times}30cm)$, $27plants/m^2(15{\times}25cm)$, and $33plants/m^2(15{\times}20cm)$). There were no significant interactions between Shoot fresh and dry weights per plant or bulb stem fresh and dry weights per plant and planting density. Shoot fresh and dry weight per area or bulb stem fresh and dry weight per area were the highest at $33plants/m^2$. There were no significant interactions between plant height, leaf area, photosynthetic rate, hardness, and chlorophyll content and planting density. Significant differences in Bulb stem height and diameter, and brix were observed. Bulb stem height and diameter and brix of kohlrabi were the highest at $22plants/m^2$. Based on our results, we conclude that the optimal planting density is $33plants/m^2$ for growth of kohlrabi, however, the optimal planting density is $22plants/m^2$ for quality of kohlrabi in a closed-type plant factory system.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.1-7
• /
• 1998

This study was to investigate the productivity of 24-year-old Larix leptolepis plantation in the Experimental Forest of Chungbuk National University located in Mt. Worak, Chungchungbuk-do, Korea. Eight plots(l0m x l0m) were established in the larch plantation in the 9th compartment. Eight sample trees were selected and cut off. Stem, branches and leaves were weighed respectively with the stratified clipping method, and analyzed for productive structure. The allometric regression equations between dry weight of each component(stem, branches. and needles) and D$^2$H were obtained. The results obtained are summarized as follows; (1) Photosynthetic layer of Larix leptolepis was shown at about 13m in height, and maximum needle amount of crown at 15-l6m in height. (2) The total biomass of aboveground was 186.25tons/ha(86.3% from stem, 9.9% from branches and 3.8% from needles). (3) Annual net production of aboveground was 12.17tons/ ha/yr, and the ratios of stem, branches and needles to that of aboveground, 0.835, 0.12, and 0.045, respectively.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2002

This study was to investigate the productivity of 30-year-old Quercus mongolica forest in the Experimental Forest of Seoul National University located in Mt. Taehwa, Kyonggi-do, Korea. Eight sample trees were selected and cut off. Stem, branches and leaves were weighed respectively with the stratified clipping method, and analyzed for productive struts lure. The allometric regression equations between dry weight of each component(stem, branches, and needles) and D$^2$H were obtained. The results obtained are summarized as follows; (1) Photosynthetic layer of Quercus mongolica was shown at about 4m in height, and maximum needle amount of crown at 10m in height. (2) The total biomass of aboveground was 67.886ton/ha(75.5% from stem, 19.4% from branches and 5.1% from needles). (3) Annual net production of aboveground was 12.76ton/ha/yr, and the ratios of stem, branches and needles to that of aboveground, 44.1%, 28.7% and 27.2%, respectively.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.197-201
• /
• 2011

This study was carried out to investigate cut flower quality bulb circumference and cultivars affecting 7 different cultivars to produce high quality cut flower lilies. To determine the effects of bulb circumference on growth and cut flower quality of 7 different cultivars, Lilium oriental hybrid 'Chilli', 'Ismael', 'Medusa', 'Mother's Choice', 'Siberia', 'Sorbonne', and 'Yelloween' were tested. After cut flower quality experiment, the highest 1st flower bud length and cut flower height were 'Medusa' and 'Mother's Choice' respectively. Most plants had over $30^{\circ}$ stem bending angle except for 'Mother's Choice', and 'Ismael'. The study shows that the bigger bulb circumference has the better 1st peduncle diameter, inflorescence length, stem diameter, number of flowers, and fresh weight. Bulb circumference affects the 1st flower bud length, cut flower height and number of flowers. Stem bending angle, however, is affected by neither bulb circumference nor cultivar. In conclusion, growth, cut flower quality and vase life were affected by the bulb circumference rather than cultivar.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.404-411
• /
• 1988

This study was conducted to find out the optimum fertilizer level for two job's tear varieties. Heuksuk and Ewon from local cultivars at 18 compositions of fertilizer levels. Plant height was longest. number of tillers and leaves were increased. stem diameter was thickest, 100 grains weight. stem and grain yield were heaviest at the compositions of fertilizer amounts with N-P$_2$O$\sub$5/-K$_2$O were 18-9-9$\^$kg/ (3-2-2) per 10a. Plant height. number of tillers and leaves. stem diameter, 100 grains weight and stem yield showed significant difference between grain yield and showed positive correlation. Judging from the results reported above, in optimum fertilizer amounts for N-P$_2$O$\sub$5/-K$_2$O seemed to he 18-9-9$\^$kg/ (3-2-2) per 10a.

• Journal of Yeungnam Medical Science
• /
• v.37 no.1
• /
• pp.40-46
• /
• 2020

Background: Postoperative pain occurring after hip arthroplasty has become common since the expanded use of cementless femoral stems. The characteristic pain develop in the anterolateral thigh area. This study aimed to predict anterior thigh pain based on the measurements of postoperative anteroposterior (AP) and lateral (Lat) radiographs of the hip joint. Methods: The present study included 26 patients (29 hips) who underwent total hip replacement or bipolar hemiarthroplasty between March 2010 and May 2016, whose complete clinical information was available. AP and Lat radiographs of the affected hip were taken on the day of surgery and 1 and 6 months postoperatively. Patients with improper radiographs were excluded. The distance from the femoral stem to the nearest cortical bone in the distal region of the stem was measured. The patient group with a visual analog scale (VAS) score of ≥6 points was designated as patients with anterior thigh pain. Results: Sex, age, weight, height, body mass index, and bone mineral density in the lumbar spine and femur did not have a significant effect on postoperative VAS scores (p>0.05). Presence of contact between the femoral stem and cortical bone was associated with postoperative anterior thigh pain. Conclusion: Hip AP and Lat radiographs are usually taken to confirm fixation and alignment of the femoral stem after hip arthroplasty. The measurement method introduced in this study can be utilized for predicting anterior thigh pain after hip arthroplasty.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.357-366
• /
• 2015

This study was conducted to estimate carbon stocks of Quercus serrata with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010), and method provided in IPCC GPG was applied to estimate carbon storage and removals. Performance in predicting stem diameter at a specific point along a stem in Quercus serrata by applying Kozak's model,$d=a_1DBH^{a_2}a_3^{DBH}X^{b_1Z^2+b_2ln(Z+0.001)+b_3{\sqrt{Z}}+b_4e^Z+b_5({\frac{DBH}{H}})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume tables of Quercus serrata were derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.65t/m^3$, BEF=1.55, R=0.43) of Quercus serrata. As a result of carbon stock analysis by age class in Quercus serrata, carbon stocks of IV age class (11,358 ha, 36.5%) and V age class (10,432; 33.5%) which take up the largest area in distribution of age class were 957,000 tC and 1,312,000 tC. Total carbon stocks of Quercus serrata were 3,191,000 tC which is 3% compared with total percentage of broad-leaved forest and carbon sequestration per hectare(ha) was 3.8 tC/ha/yr, $13.9tCO_2/ha/yr$, respectively.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.415-424
• /
• 2017

This study was conducted to estimate carbon stocks of Pinus densiflora with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree age, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010) and Statistical yearbook of forest (2016), and method provided in IPCC GPG was applied to estimate carbon stock and uptake. Performance in predicting stem diameter at a specific point along a stem in Pinus densiflora by applying Kozak's model, $d=a_{1}DBH^{a_2}a_3^{DBH}X^{b_{1}Z^2+b_2ln(Z+0.001)+b_3\sqrt{Z}+b_4e^z+b_5(\frac{DBH}{H})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume table of P. densiflora was derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.445t/m^3$, BEF = 1.445, R = 0.255) of P. densiflora. As the results of analysis in carbon uptake for each province, the values were high with Gangwon-do $9.4tCO_2/ha/yr$, Gyeongsandnam-do and Gyeonggi-do $8.7tCO_2/ha/yr$, Chungcheongnam-do $7.9tCO_2/ha/yr$ and Gyeongsangbuk-do $7.8tCO_2/ha/yr$ in order, and Jeju-do was the lowest with $6.8tC/ha/yr$. Total carbon stocks of P. densiflora were 127,677 thousands tC which is 25.5% compared with total percentage of forest and carbon stock per hectare (ha) was $84.5tC/ha/yr$ and $7.8tCO_2/ha/yr$, respectively.