• The Plant Pathology Journal
• /
• v.29 no.1
• /
• pp.116-122
• /
• 2013

To evaluate the mechanisms of pathogenicity and nonpathogenicity of Bursaphelenchus xylophilus and B. mucronatus isolated in South Korea, we used 4-year-old P. thunbergii seedlings and 20-cm long one-year-old stem cuttings of 5-year-old Pinus thunbergii, and studied distributions and multiplications of pine wood nematodes after inoculation. The distributions of B. xylophilus in the 20-cm pine stem cuttings were not significantly different from that of B. mucronatus. Conversely, the proliferation rate of B. xylophilus on mycelial mats of Botrytis cinerea was significantly different from that of B. mucronatus. The study using 4-year-old P. thunbergii seedlings also showed that B. mucronatus can migrate to distal portions of the pine seedlings the same as B. xylophilus, but the populations of B. xylophilus remaining in the pine seedlings were relatively larger than those of B. mucronatus. Therefore, we concluded that the pathogenicity of B. xylophilus could be strongly influenced by its ability to multiply.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.201-206
• /
• 1999

For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.9-19
• /
• 1997

These studies were carried out to investigate seed propagation method and conducted using stem cuttings of Styrax japonicus for using as a woody landscape plant. The results are obtained as follows. After the H\sub2\SO\sub 4\ and GA\sub 3\ treatment to the seeds of Styrax japonicus, three months of warm treatment followed by cold stratification for four months increased seed germination rate. The rooting rate of Styrax japonicus was increased by the treatment with concentrated IBA, especially highest at 7,000ppm. Rooting percentages were highest for cuttings taken on July 15, 1995. Therefore, the most effective method for rooting of Styrax japonicus was treatment with 7,000ppm IBA on July 15 cuttings, which showed rooting rate of over 90%. Half-leaf-remained cuttings were more effective than those with two leaves on rooting of Styrax japonicus. Dipping for 10 seconds in IBA solution resulted in rooting rate of over 70%. The longer the treatment time the worse the rooting.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.11-17
• /
• 2015

The study was conducted to investigate the effect of rootstock on growth and early yield of stenting-propagated cut roses (Rosa hybrida Hort.) 'Pink Aurora' and 'Yellow King'. The scions, prepared as single-node cuttings, each with a five-leaflet leaf, were grafted onto cuttings of Rosa indica 'Major', Rosa multiflora 'Chille Wonye No. 1', Rosa multiflora 'K-1', or Rosa multiflora 'Burr' as the rootstock. The rootstock cuttings were removed of all leaves and buds before grafting. The base of scion and the top of rootstock were held together and simultaneously cut at a $45^{\circ}$ angle for ease of grafting. Scion-rootstock unions were stuck in rockwool cubes and placed on a misted glasshouse bench for rooting before being transplanted into a rockwool slabs for cultivation. Rooting was the greatest in the 'Pink Aurora' and 'Yellow King' grafted on the rootstock Rosa indica 'Major'. In 'Pink Aurora', stem length, stem diameter, five-leaflet leaves per stem, and stem fresh weight of the harvested cut flowers were not affected by the rootstock. The greatest total yield of 'Pink Aurora' was obtained in plants grafted onto the Rosa indica 'Major' rootstock. Overall growth of 'Yellow King' was the greatest in plants grafted onto Rosa multiflora 'Burr' rootstock, although total yield was not affected by the rootstock. These results suggest that Rosa indica 'Major' is the most effective rootstock not only for rooting, but also for early yield and growth for stenting propagation of these cut roses.

• Korean Journal of Organic Agriculture
• /
• v.23 no.3
• /
• pp.469-480
• /
• 2015

The study was conducted on the effects of time of defoliation on fruit quality of pear (Pyrus pyrifolia Nakai) trees, managing with low-pesticides, and regrowth of stem cuttings in vitro. Treatments included for 40% of uniform defoliation at early-August, end-August, and early-September, as well as control (no defoliation). Defoliation at early-September and control increased growth of water sprouts as well as concentrations of carbohydrates, total nitrogen, and free sugar in one-year old shoots. Defoliation at early-September and control increased fruit yield and mean fruit weight, with high soluble solids content and fruit surface color of $a^*$ observed for both defoliation at end-August and early-September. Defoliation at early-August increased rates of electrolyte leakage in stem cuttings at $-18^{\circ}C$ in vitro. There were no significantly different for germination rates of the cuttings between the treatments at -18 and $-21^{\circ}C$ in vitro, with the highest germination of the cuttings observed for defoliation at early-September and control at $-27^{\circ}C$. Therefore, orchard management should be performed to be minimized for defoliation of the spur leaves until end-August, causing from precipitation and pests.

• Journal of Biosystems Engineering
• /
• v.35 no.1
• /
• pp.37-45
• /
• 2010

Since SRC (Short-term Rotation Coppice) such as poplar and willow can be harvested in three years, they are known to be a potential forest biomass as fuel for a power plant. The production system including transplanting and harvesting is, however, necessary to be mechanized because such a biomass should be handled in a massive volumetric size. A pull-type stem-cutting transplanter was developed in the research as the first step to realize the production of SRC. A needle-like transplanting device pushes a stem-cutting into the prepared soil bed by a pneumatic cylinder, and another device firms soil around a stem-cutting transplanted. Since this is an intermittent operation, it was necessary to develop a zero horizontal velocity mechanism which enabled only the transplanting needle part to continue a zero horizontal movement relative to the ground during the transplanting operation even when the tractor kept moving forward. The 2-row transplanter can transplant stem-cuttings at the rate of 6.5 seconds per row without missing a single attempt. The planting depth and distance were well maintained and controlled. Their CVs were between 2.1~3.4% and 0.87~1.7% for the depth and the distance, respectively. Although, the transplanted stem-cuttings tended to lean outward from the back-view and forward from the side view, they were planted within the range of $3^{\circ}$ from the upright position.

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.355-357
• /
• 1998

Various temperatures and plant growth regulators were assessed to investigate the nature of the dormancy and bud sprouting of stem cutting of Hibiscus syriacus 'Honghwarang'. The bud sprouting was promoted as temperature increased. Under $30^{\circ}C$ condition, stem cuttings began sprouting at 4days after cutting and showed 100% sprouting at 6 days after cutting. With GA or BA treatment, the cuttings started sprouting at 6 days after cuttings under $25^{\circ}C$ condition and reached 65% sprouting, which was not different from the results without hormone treatments. However, ABA dipping under below $25^{\circ}C$ condition resulted in low sprouting, whereas under over $25^{\circ}C$ condition they started sprouting at 6 days after cutting and reached 93% at 12 days after cutting, which indicated that ABA is not effective on inhibition of sprouting under high temperature condition.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.223-225
• /
• 2007

Many plant growth-promoting rhizobacteria (PGPRs) have been known for beneficial effects on plants including biological control of soilborne pathogens, induced systemic resistance to plant pathogens, phytohormone production, and improvement of nutrient and water uptake of plants. We developed a simple and rapid method for screening potential PGPR, especially phytohormone producing rhizobacteria, or for analyzing their functions in plant growth using cucumber seedling cuttings. Surface-sterilized cucumber seeds were grown in a plastic pot containing steamed vermiculite. After 7 days of cultivation, the upper part 2 cm in length of cucumber seedling, was cut and used as cucumber cuttings. The base of cutting stem was then dipped in a microcentrifuge tube containing 1.5ml of a bacterial suspension and incubated at $25^{\circ}C$ with a fluorescent light for 10 days. Number and length of developed adventitious roots from cucumber cuttings were examined. The seedling cuttings showed various responses to the isolates tested. Some isolates resulted in withering at the day of examination or in reduced number of roots developed. Several isolates stimulated initial development of adventitious roots showing more adventitious root hair number than that of untreated cuttings, while some isolate had more adventitious root hair number and longer adventitious roots than that of untreated control. Similar results were obtained from the trial with rose cuttings. Our results suggest that this bioassay method may provide a useful way for differentiating PGPR's functions involved in the development of root system.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.101-105
• /
• 1997

Most of the mulberry saplings in Korea have been produced by grafting. But the production of mulberry sapling by this method is very complex process and requires high level of technique and two years to produce saplings. Therefore, to develop the mulberry sapling production system by softwood cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to mulberry varieties, showing the highest rooting ratio of 93.3% in cultivar of Shingwangppong. Of different soil texture as for rooting media, the clay was found to be the best; other media decreased in order as follows; sand, sand loam and vermiculite. The shading ratio by 70% with polyethylene film showed the highest rooting ratio of the cuttings. Optimum day of cutting was around 50th day after sprouting, whereas the ratio of stem thicker than 7mm at the base of saplings in diameter was highest at 44th day.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.33-37
• /
• 2010

Effects of cutting time of double flowered Hydragea serrata for. acuminata native to Korea on flowering and growth of following year were investigated in order to develop as a pot plant. Cuttings were carried out every 10th day from April to September in 2008. The cuttings were directly placed in 15 cm diameter pots. Longest plant was obtained from May cuttings and their average heights were 31.7 cm, and followed by April and July cuttings. Plant heights of August and September cuttings were 23.6 cm and 22.0 cm, respectively. In contrast, growth and height of June cutting were abnormally small. Leaf length, leaf width and petiole length of August and September cutting were reduced, but numbers of leaves were not changed. Average flower cluster numbers of May cuttings were 4 flower clusters, and July, August and September cuttings were 3 clusters while only 1 flower cluster per a plant was obtained during June. Biggest diameter of flower crown was observed from May cuttings and the size was 10.3 cm diameter; however, smaller flower crown size was observed after July cuttings. The best overall flower appearance was observed from May cuttings, and the worst was June cuttings. Even though plant height of August and September cuttings were reduced, flowering aspect and ornamental value were normal, but blooming times were retarded according to late cutting time.