• 한국도로학회논문집
• /
• 제12권3호
• /
• pp.79-85
• /
• 2010

본 논문은 골재부착력(aggregate retention) 평가를 통해서 칩실(chip seal)에서 사용되는 롤러 종류의 기초적인 연구 결과를 설명하고 있다. 입도 78M의 화강암 골재와 CRS-2 이멀젼(emulsion)을 사용하여 single layer 칩실 테스트 구간을 시공하였으며, 3개의 다른 롤러 종류를 사용하였다. 사용된 롤러 종류는 pneumatic tire roller, steel wheel roller, and combination roller를 사용하였다. 세 종류의 롤러의 성능을 효과적으로 연구하기 위해서는 시공현장으로부터 직접 테스트용 시편을 얻는 것이 매우 중요하기 때문에, 노스캐롤라이나 주, Bailey에 있는 New Sandy Hill Church Road에서 테스트 구간 설정하고 일반적인 노스캐롤라이나 주의 칩실시공 절차에 준하여 시공을 실시하였다. 테스트 구간에서 제작된 시편들을 실험실로 옮겨서 골재부착력(aggregate retention) 성능평가를 실시하였다. 골재의 부착력을 평가하기 위해서 flip-over test(FOT), Vialit test, and the third-scale Model Mobile Loading Simulator (MMLS3) 시험방법들을 채택하였다. 세 가지의 시험결과들과 시험시공 현장에서 관측된 육안조사를 통해서 다음과 같은 롤러 종류와 순서를 추천하게 되었다. pneumatic tire roller 와 combination roller를 함께 사용하며 처음에 pneumatic tire roller가 다짐을 한 뒤에 그 뒤를 combination roller가 다짐하는 순서로 다짐작업을 함으로써 칩실의 성능이 향상 되리라 사료된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.274-277
• /
• 2003

The purpose of this study is preparing the database for conventional spinning of the steel sheets which are applied into the mechanical parts such as wheel disc and driving clutch drums. The experimental work for the conventional spinning of cylindrical typed shell has been carried out and the database for limiting spinning ratios, suing-back and thickness distributions has been obtained. The working conditions are categorized for the feeding velocity and dimension of rotating mandrel and forming roller. The results are useful to the product design of conical parts. And the present study can contribute to the improvement of industrial technology.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.67-73
• /
• 2015

In this paper, the simple truss model was modified to predict the punching shear strength of long-span prestressed concrete (PSC) deck slabs under wheel load including the effects of transverse prestressing and long span length between girders. The strength of the compressive zone arounding punching cone was evaluated by the stiffness of inclined strut which was modified by considering aging effective modulus. The stiffness of springs which control lateral displacement of the roller supports consists of the steel reinforcement and prestressing which passed through the punching cone. Initial angle of struts was determined by the experimental observation to compensate for uncertainties in the complexities of the punching shear. The validity of computed punching shear strength by modified simple truss model was shown by comparing with experimental results and the experimental results were also compared with existing punching shear equations to determine level of predictability. The modified simple truss model appeared to better predict the punching shear strength of PSC deck slabs than other available equations. The punching shear strength, which was determined by snap-through critical load of modified simple truss model, can be used effectively to examine punching shear strength of long span PSC deck slabs.