• 제목/요약/키워드: steel pier

검색결과 154건 처리시간 0.034초

충전원형강관을 이용한 모듈러 교각의 휨 거동 평가 (Evaluation of Flexural Behavior of a Modular Pier with Circular CFT)

  • 마향욱;오현철;김동욱;;심창수
    • 한국강구조학회 논문집
    • /
    • 제24권6호
    • /
    • pp.725-734
    • /
    • 2012
  • 모듈화된 급속시공 교량 구조물의 하부구조 형식으로 충전 원형강관을 이용한 교각 구조물을 제안하였다. 다수의 충전강관을 연결하여 표준화된 제품으로 생산하여 운반 조립할 수 있는 구조 상세와 연결 상세를 제안하였다. 제안된 구조상세와 연결상세를 반영한 모듈러 교각의 정적실험을 강축과 약축에 대해서 횡변위 조건으로 수행하였다. 단일 기둥으로 설계한 것에 비하여 모듈러 CFT 교각 시스템이 브레이싱으로 연결된 편심효과로 인해 5.23배 높은 휨강성을 나타내었고 휨강도도 6배 이상 증가하였다. 합리적인 설계를 위해서는 모듈러 CFT 교각을 프레임으로 모델링하여 응력 및 처짐 검토를 수행하는 것이 타당한 것으로 나타났다. 교각을 구성하는 기둥간의 간격 조정을 통해서 필요한 내하력을 확보할 수 있을 것으로 판단되고 설계를 위한 고려사항을 제안하였다.

강재교각 기초부의 연결상세 개선을 위한 실험적 연구 (An Experimental Study For Improvement of Joint Detail of Steel Pier - Foundation)

  • 김희주;함준수;양성돈;황원섭
    • 한국강구조학회 논문집
    • /
    • 제24권5호
    • /
    • pp.491-501
    • /
    • 2012
  • 현재 강재교각 기초부의 설계에 적용되어지고 있는 형식은 기초 콘크리트 내부에 앵커프레임을 설치하여 교각부와 연결하는 형태로 설계 및 시공을 하고 있다. 이는 복잡한 설계와 시공으로 인하여 기초부의 크기가 커지고, 과대 설계되는 경향이 있다. 본 연구에서는 고성능강을 이용한 교각 기초부의 연결상세와 관련하여 새로운 형상을 제안하기 위하여 기존 설계기준에 의한 시험체와 고장력 앵커를 사용한 새로운 연결형상 시험체 등 총 3개의 시험체를 제작하여 실내 시험을 실시하였다. 이를 통하여 각 시험체의 성능을 비교 분석하여 연결형식에 따른 구조물의 거동특성을 분석하였다.

강한 지진 하중하에서 강재 교각의 손상 거동 연구 (A Study on Damage Process Analysis for Steel Pier Subjected to Seismic Excitation)

  • 박연수;박근구;박선준
    • 한국강구조학회 논문집
    • /
    • 제12권3호통권46호
    • /
    • pp.251-258
    • /
    • 2000
  • 강구조물과 부재들의 지진 손상도 평가법에 새롭게 접근하기 위하여 강한 지진하중을 받는 강재 교각에 대해 수치해석을 수행하였다. 새로운 손상도 평가법에서 파괴 상태에 대한 기준은 지진하중이 재하되는 동안에 응력집중이 가장 심한 단면의 한 부분에서 누적소성변형율의 값이 90%에 이르게 되는 때를 의미한다. 단주기 특성의 지진하중에 대해서는 소성변형율의 누적에 의한 국부좌굴 파괴보다는 허용변위를 초과하는 전체좌굴에 의한 파괴가 지배적인 것으로 밝혀졌다. 장주기 특성의 지진하중에 대해서는 소성변형율이 강재교각 하부의 모서리 부분 요소에 누적되면서 누적 소성변형율에 의한 국부좌굴로 파괴되는 결과를 보였다.

  • PDF

내부 구속 중공 RC 교각의 매개변수 연구 (A Parameter Study of Internally Confined Hollow Reinforced Concrete Piers)

  • 최준호;윤기용;한택희;강영종
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2007년도 정기총회 및 학술발표대회
    • /
    • pp.59-62
    • /
    • 2007
  • The hollow RC(Reinforced concrete) pier has decrease of weight and reduced of materials compared to solid RC pier. However, the hollow RC pier shows a low ductile behavior due to brittle failure of inside concrete. To overcome this problem, the internally confined hollow reinforced concrete column has been developed. In this study, the behavior of internally confined hollow RC piers were evaluated with safety ratio, ductility, total material cost, the total weight of the pier, etc. The chosen parameters for the study are hollow ratio, thickness of internal steel tube, intervals between vertical re-bars, numbers of horizontal re-bars, and strength of concrete.

  • PDF

해상 강관말뚝의 설계 및 항타시공관리 사례연구 (A Case Study on the Design and Drivability Criteria of Steel Pile in Offshore)

  • 송명준;박영호;유석준;심동현
    • 기술발표회
    • /
    • 통권2006호
    • /
    • pp.75-85
    • /
    • 2006
  • The project comprised the construction of the new oil pier and associated topside facilities and demolition of exiting south pier. The site is located approximately 33km south of Kuwait city at MAA refinery. The approach trestle and berth structures of the new oil pier were designed to be supported by steel tubular piles Total 2,480 numbers of piles(795 piles at Approach Trestle, 1187 piles at Berth 1 -4 and 498 piles at Berth 5-6) had to be driven through the calcareous silty sand In this study, the design procedures for offshore steel pipe piles, evaluation for the compression and tension capacities by static and dynamic load test and effective driving criteria by the final set values are discussed

  • PDF

Top-Down 공사용 원형충전강관기둥과 피어기초의 개발 (Development of Connection between CFT Column and Pier Foundation for Top-Down Construction)

  • 정미라;임홍철;김승원;김동건;강승룡
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
    • /
    • pp.29-32
    • /
    • 2009
  • Building foundations for Top-Down construction require a special setting, because the foundations have to be placed way before excavation for the substructure of main building, Usually, the foundation goes into the layer of rock and it is often called rock-pier foundation, Currently, a cage of steel reinforcing bars is inserted to the pre-excavated hole in the rock layer, hanging down from the wide flange steel column above. This paper presents a new method for connecting the prefounded column and the steel cage with a coupler for better connection between the two, The use of a circular Concrete Filled Tube (CFT) as a prefounded column makes it possible to have this type of connection. The details of the connection and application to a Top-Down construction site is also included in this paper.

  • PDF

내부 구속 중공 RC 교각의 매개변수 연구 (A Parameter Study of Internally Confined Hollow Reinforced Concrete Piers)

  • 최준호;윤기용;한택희;강영종
    • 한국방재학회 논문집
    • /
    • 제10권4호
    • /
    • pp.17-24
    • /
    • 2010
  • 중공 RC 교각은 중실 RC 교각에 비해 자중의 감소 및 재료 절감에 대한 장점을 가진다. 그러나 중공 RC 교각은 안쪽면의 취성파괴로 인하여 낮은 연성 거동을 할 가능성이 있다. 이러한 문제점을 해결하기 위해 중공 부재 내의 콘크리트 3축 구속 상태로 존재하게 하는 내부 구속 중공 RC 교각이 개발되었다. 본 연구에서는 내부 구속 중공 RC 교각의 매개변수(중공비, 내부강관두께, 횡방향 철근 간격, 종방향 철근 개수, 콘크리트 강도)변화에 따른 안전율, 연성도, 재료비 및 교각 총 중량에 대한 거동 특성을 파악하였다. 매개변수 변화에 따른 내부 구속 RC 교각의 거동 특성 결과 내부 강관 두께는 최소한의 내부강관 두께를 적용하는 것이 효과 적인 것으로 파악되었다.

강제라멘교각 접합부의 응력평가법 (Stress Evaluation Procedure for Connection of Steel Frame Pier)

  • 황원섭;김영필
    • 한국강구조학회 논문집
    • /
    • 제10권3호통권36호
    • /
    • pp.327-338
    • /
    • 1998
  • 본 연구는 강제라멘교각 접합부의 탄성거동에 대하여 검토한 것이다. 여기에서는 접합부 시험체의 실험결과와 FEM해석모델에 대한 결과를 비교하였다. 이와 같은 해석 및 실험결과를 비교 검토한 결과, 접합부 panel zone에서의 전단응력분포는 단면적비$(A_f/A_w)$에 따라 변화한다는 것과 전단지연(shear lag)현상에 의하여 플랜지에 발생하는 부가응력 또한 기존의 제안식과 현저한 차이가 있음을 알 수 있었다. 따라서 본 연구에서는 이상의 실험 및 해석결과를 기초로하여 접합부의 설계변수의 영향을 고려한 panel zone과 플랜지의 응력평가방법을 제안하였다.

  • PDF

강관으로 내부 구속된 중공 R.C 교각의 거동 특성 (Behavior of a Hollow R.C Pier Internally Confined by a Steel Tube)

  • 김성남;한택희;강영종
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 추계학술대회 논문집
    • /
    • pp.176-184
    • /
    • 2005
  • When the weight if a concrete member makes problems. or when the cost of the concrete is relatively high, it may be economical to use a hollow concrete member. But a hollow R.C Pier may have poor ductility because of the brittle failure at the inner face of the hollow R.C Pier. This brittle failure results from the absence of the confinement at the inner face of the hollow R.C Pier. To avoid this brittle failure an internally confined hollow R.C Pier was developed. Test results show that the energy ductility ratio of a internally confined hollow R.C Pier have a superior energy ductility ratio to a general hollow R.C Pier.

  • PDF

Overturning Resistance of Plain Concrete Piers in OSPG Railroad Bridges

  • Rhee, In-Kyu;Park, Joo-Nam;Choi, Eun-Soo
    • International Journal of Railway
    • /
    • 제3권1호
    • /
    • pp.1-6
    • /
    • 2010
  • The steel plate-girder bridges with concrete gravity piers have possibilities of overturning by lateral inertial force which can be reproduced by sudden earthquake attack. This paper explores an overturning mechanism of existing concrete gravity pier onto the sandy soil in the event of lateral push-over load by in-situ experimental observation. The in-situ push-over experiment for pier with earth anchors between spread footing and rock beds exhibits a reasonable enhancement of ductility against overturning. In unanchored system, a flexural crack at cold joint of concrete pier is not developed because of the over-turning of the pier. This leads a global instability (rotation) of pier-footing system with relatively low stresses in pier itself. While a lateral load is persistently increased in anchored system, the successive flexural cracking failure at cold joint is observed even after the local shear failure of soil due to redistribution of stress equilibrium between soil and pier structure as long as a tensile action of anchor cable is active.

  • PDF