• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.373-381
• /
• 2009

To preserve steel cultural properties on display outdoors, the surface of these relics is processed with a covering treatment, which is a typical anti-corrosion method. Since the registered cultural heritage of Korea No. 78 Locomotive at Jangdan Station of Gyeongui Line will be treated by preservation process and displayed in the open outdoor area, effective surface covering agents were selected through testing to prevent the corrosion of the locomotive. The mixed wax are based on two types of microcrystalline wax which is one of regular surface covering agents for locomotives and bee‘s wax. For the weather resistance test, 3 types of wax were applied to each specimen of the locomotive and the specimens were tested in the Xenon-Arc Accelerated Weathering Tester for 1000 hours in accordance with the ISO 4892-1981 criteria and the test results were compared. As a result, on the surface of the specimen coated with the bee's wax, a whitening event appears after 400 hours which causes aging, and the specimens coated by the microcrystalline wax showed signs of a whitening event after 800 hours. The moisture contact angle with the microcrystalline wax coating was also less than with the bee's wax. Therefore, it was found that the high temperature microcrystalline wax is the most effective coating agent in terms of weather resistance and moisture blocking capability and the high temperature microcrystalline wax was adopted for coating the surface of the locomotive.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.270-274
• /
• 1998

In order to enhance the availability of Korean loquat fruit, loquat juice was manufactured and its physicochemical characteristics are measured. The juice of raw fruit and pressed juice after blanching with steam that the pH, sugars, total acids and yields were 3.4, 3.6, and 8.5, 8.0 $^{\circ}$ Brix, and 0.36, 0.34%, and 53.2, 57.4% respectively. Four groups of juices were processed as followed. A ; juice of clarified after filteration, B ; pressed and filtered juice of raw fruit in refrigerated for 50 days, C ; clarified juice of heated at 90$^{\circ}C$ for 2 min., D ; clarified juice of blanched and pressed with raw fruit. Total acids, pH and sugars of A, B, C and D juices were 0.27, 0.35, 0.29 and 0.28%, and 3.80, 3.10, 3.68 and 3.71, and 7.5, 8.5, 8.0 and 8.2 $^{\circ}$Brix, respectively. Juice of B was higher total free sugar and organic acid than others. The chromaticity of D juice was stable than others. In the sensory test of loquat juice, that the product showed excellent result at 11 $^{\circ}$Brix and pH 3.78 when 4% of fructose and 0.05% of citric acid added.

• Corrosion Science and Technology
• /
• v.6 no.6
• /
• pp.316-321
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.4
• /
• pp.427-435
• /
• 2016

The effects of salt solution and chlorella on the quality of canned oyster, Crassostrea gigas, were evaluated to obtain basic data regarding the processing of two canned oyster products. In canned oyster processing, the shucked oyster meat was steamed for 20 min and then drained. Then, each can (301-3) was filled with 90 g boiled oyster in 60 mL 1.5% salt solution for the control samples or 30 mL 1.5% salt solution and 30 mL chlorella culture medium for the experimental samples. All canned products were sealed using a vacuum seamer and then sterilized to Fo values of 6-12 min in a steam retort system at 118℃. The viable bacteria count, proximate composition, pH, salinity, yield, volatile basic nitrogen (VBN), amino-nitrogen, thiobarbituric acid (TBA), mineral, color value, free amino acid levels, hardness, and sensory evaluation of the two canned products were measured under various sterilization conditions. There were no significant differences in the physical or chemical factors and little difference in the overall acceptance of the control and experimental samples.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.640-645
• /
• 1995

Job's-tears(Coix lachryma-jobi L. var. Ma-yuen Stapf) seeds were processed to flakes by soaking, heat treatment, intermediate-moisture drying, flaking, drying, and cooking. Some functional properties of job's-tears flakes subjected to varing degree of heating were characterized by specific volume, texture, water absorption index(WAI), water solubility index(WSI), and viscosity. As degree of gelitinization increased within the intermediate range of $60{\sim}70%$, steam-cooked Job's-tears demonstrated appropriate rheological properties for further processes, resulting in increased specific volume and decreased breaking strength. However, excessive heat treatment rendered Job's-tears undesirably sticky for flaking, which caused adverse effects on the functional properties of flakes such as specific volume and breaking strength. Increasing steaming time$(5{\sim}30\;min)$ caused an increase in WAI and WSI values. Apparent viscosity of powdered flakes was increased with the extent of gelitinization as a function of heat processing. Viscosity of powdered flakes determined using the amylograph increased with the degree of heating applied to Job's-tears at low pasting temperatures, accompanied by a decrease in maximum viscosity as the pasting temperature increased.

• Food Science and Preservation
• /
• v.15 no.4
• /
• pp.524-531
• /
• 2008

To investigate tea prepared from Ixeris dentata root, color, and levels of free sugars, organic acids, cynaroside, total polyphenolics, and free amino acids were investigated using various thermal processing methods. These included natural drying(ND), hot-air drying(HAD, $75^{\circ}C$), hot-air drying after steam(HADS, steaming at $95^{\circ}C$ for 30 min) and roasting after hot-air drying(RHAD, roasting at $140^{\circ}C$ for $2{\sim}3$ min). Total free sugars, organic acids, cynaroside, and free amino acids contents were highest after ND treatment. Total polyphenolics was highest after RHAD processing. The level of cynaroside, a principal component of Ixeris dentata root, was significantly decreased by HADS. The major free sugars were fructose, glucose and sucrose. Succinic acid was prominent among organic acids, and was present at 2.25%(v/v) after ND treatment. The lightness(L), redness(a), and yellowness(b) of all dried Ixeris dentata root powders were best after RHAD treatment, but analysis of the leaching liquids after hot water treatment yielded variable results. Lightness and redness were the highest after RHAD and yellowness was the highest after ND treatment. Overall, the RHAD drying method was found to be superior to other methods, in sensory evaluation tests.

• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.496-501
• /
• 2009

This study was carried out to investigate physiological functionalities of tea prepared by various thermal processing methods from Ixeris dentata root in order to elevate utilization of Ixeris dentata root as food. These methods included natural drying (ND), hot-air drying (HAD, $75^{\circ}C$), hot-air drying after steam (HADS, steaming at $95^{\circ}C$ for 30 min) and roasting after hot-air drying (RHAD, roasting at $140^{\circ}C$ for $2{\sim}3$ min). Physiological functionalities of tea prepared by ND, HAD, HADS, and RHAD were measured as hot-water extracts and each tea was extracted by 100 mL water on 1 g dried Ixeris dentata root powder. Electron donating abilities were the highest in HADS treatment at 98%. SOD-like activities were the highest in RHAD at 35.61%. Both ACE and tyrosinase inhibitory activities were the highest on ND treatment at 52.34% and 44.60%, respectively. Nitrite scavenging abilities of all treatment were the highest at pH 1.2 and the highest activity among them was on RHAD treatment at 50.5%.

• Journal of the Korean Society of Earth Science Education
• /
• v.14 no.2
• /
• pp.173-192
• /
• 2021

The purpose of this study is to analyze the previous research on geological fieldwork from 2000 to 2020, examine the tasks that have been focused on, and suggest directions and implications for future geological fieldwork research. The data was conducted for the thesis searched on ScienceON and RISS in relation to geological fieldwork and journals listed in the Korean Citation Index(KCI), and the study title was analyzed using the semantic network analysis. For analysis, the data that had been pre-processed was visualized as a network by semantic network analysis, and frequency and centrality were analyzed. The centrality analysis was based on degree centrality and eigenvector centrality, and all analyzes were performed by dividing the entire study period into four periods: 2000-2005, 2006-2010, 2011-2015, and 2016-2020. As a result, research on geological fieldwork focused more on the development of geological field courses, and in particular, jeju island was actively discussed as a learning site. Also, the study was conducted on students rather than teachers, and among them, high school students showed high frequency and centrality. In addition, it can be seen that studies on the educational effect of geological fieldwork were discussed, either in connection with programs such as STEAM, free-semester program, or indirect geological fieldwork methods such as web, flash panorama, and 3D. This study is meaningful in that it suggests the direction of future research by looking back on the research on geological fieldwork that has been done so far.