• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.108.1-108.1
• /
• 2014

Near-infrared Imaging Spectrometer for Star formation history (NISS), one of the main payloads of NEXTSat-1, is being developed by Korea Astronomy & Space Science Institute (KASI). Since NISS adopts an infrared reflecting optical system, its performance is highly sensitive to changes in system temperature. Therefore, it is important to figure out the temperature through thermal analysis and cooling tests in order to optimize the optical system design. We conducted thermal analysis of NISS for the recently updated model, and obtained steady state temperature of the optical system for two cases of satellite attitude: about 190 K for the Normal case and about 210 K for the Hot case. In this paper, we present thermal design of NISS and the preliminary thermal analysis results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2109-2119
• /
• 2000

In this paper, the Packet CDMA Reservation ALOHA protocol is proposed to support the multi-traffic services such as voice and videophone services with handoff calls, high-rate data and low-rate data services efficiently on the multi-rate transmission in uplink cellular systems. The frame structure, composed of the access slot and the transmission slot, and the proposed access permission probability based on the estimated number of contending users for each service are presented to reduce MAI. The assured priority to the voice and the videophone handoff calls is given through higher access permission probability. And through the proposed code assignment scheme, the voice service can be provided without the voice packet dropping probability in the CDMA/PRMA protocols. The code reservation is allowed to the voice and the videophone services. The low-rate data service uses the available codes during the silent periods of voice calls and the remaining codes in the codes assigned to the voice service to utilize codes efficiently. The high-rate data service uses the assigned codes to the high-rate data service and the remaining codes in the codes assigned to the videophone service. Using the Markov-chain subsystem model for each service including the handoff calls in uplink cellular systems, the steady-state performances are simulated and analyzed. After a round of tests for the examples, through the proposed code assignment scheme and the access permission probability, the Packet CDMA Reservation ALOHA protocol can guarantee the priority and the constant QoS for the handoff calls even at large number of contending users. Also, the data services are integrated efficiently on the multi-rate transmission.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.140-148
• /
• 2009

MOV(Main Oxidizer shut-off Valves) control the combustion of launch vehicle systems by the supply and the isolation of liquid oxygen to a main combustion chamber in launch vehicle systems. Moreover, in the steady operational state, the MOV should secure a constant flow rate of liquid oxygen for combustion instability in the combustion chamber. Concerning the development of MOV, TM(Technology Model) has been manufactured and normal operations of the valve have been verified. However, the Cv of TM has been proved to be too low as compared with a design specification value. Therefore, CFD analysis have been performed by modification of the configurations of TM in order to increase sufficiently Cv of EM(Engineering Model), which is the following model of TM. The modifications of TM configurations such as partial scale-up of valve, increase of stroke length, and outlet angle of 120o would result in a considerable augmentation of Cv. It has been verified by flow capacity tests that the improved Cv of EM is min. 212, which is higher than Cv of TM, 161 by about 32%.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.223-230
• /
• 2001

The Monkman-Grant (M-G) and its modified parameters were estimated for modified type 316LN and $9{\sim}12Cr-1Mo$ steels with chemical variations. Several sets of creep data were obtained by constant-load creep tests in $550-650^{\circ}C$ ranges. The relation parameters, m, $m^*$, C and $C^*$ were proposed and discussed for two alloy systems. In creep fracture mode, type 316LN steel showed domination of the intergranular fracture caused by growth and coalescence of cavities. On the other hand, the Cr-Mo steel showed transgranular fracture of the ductile type caused from softening at high temperature. In spite of the basic differences in creep fracture modes as well as creep properties, the M-G and its modified relations demonstrated linearity within the $2{\sigma}$ standard deviation. The value of the m parameter of the M-G relation was 0.90 in the 316LN steel and 0.84 in the Cr-Mo steel. The value of the $m^*$ parameter of the modified relation was 0.94 in the 316LN steel and 0.89 in Cr-Mo steel. The modified relation was superior to the M-G relation because the $m^*$ slopes almost overlapped regardless of creep testing conditions and chemical variations to the two alloy systems.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.765-774
• /
• 1995

The hot deformation behaviour of particulate reinforced aluminium 6061 Al composite were investigated by hot compression tests in the temperature range from 623K to 823K with strain rate of 10$^{-3}$ ~5.0 S$^{-1}$ . The effect of reinforced particulate volume fraction, mean diameter on the high temperature flow stress has also been studied. Experimental results showed that the increase in the volume fraction of reinforcement contributed to the rising of yield stress, but the stress above the yield point appeared to be steady state at all volume fractions. The apparent activation energy for deformation was 290KJ/mo1 for unreinforced 6061 Al, 327KJ/mo1 for 6061 Al-20vo1.% SiC composite and 531KJ/mo1 for 6061 Al-20vo1.%A1$_2$O$_3$composite. It appeared that $Al_2$O$_3$reinforced composites was more difficult to hot deform.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.2
• /
• pp.97-102
• /
• 2006

Shock and vibration inputs are transmitted from the transporting vehicle through the packaging to the fruit. The vibration causes sustained bouncing of fruits against each other and the container wall. The steady state vibration input may cause serous fruit injury, and the damage is particularly severe if the fruits are bounced at its resonance frequency. The determination of the resonance frequencies of the fruits and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruits, and to understand the complex interaction between the components of the fruits when they relate to expected transportation vibration inputs. To analyze the vibration properties of the watermelon for optimum packaging design during transportation, sinusoidal sweep vibration tests were carried out. The resonance frequency of the watermelon ranged from 19 to 32 Hz and the amplitude at resonance was between 1.6 and 2.9 G. The resonance frequency and amplitude at resonance frequency band of the watermelon decreased with the increase of the sample mass. The multiple nonlinear regression equation for predicting the resonance frequency of the watermelon were developed using the independent variables such as mass, input acceleration and sphericity.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.54-62
• /
• 2004

In order to enhance the efficiency of removal a series of ElectroKinetic Remediation (EKR) tests on ferrous soil contaminated by lead are carried out using acids, chelates and surfactant as flushing agents. The test results indicate that pH in the electrolyte rapidly reached at steady state as the introduce of flushing solution of the lower pH, the type of flushing solution have no effect the distribution of electrical voltage within the sample but the increasing of solution concentration increases it at x/L=0.9. In the distribution of the residual lead in the sample SDS is the highest. Also, the removal efficiency for acetic acid concentration of 1mM Is the highest but the concentration of acetic acid significantly have no effect.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.136-143
• /
• 2012

The purpose of this study was to investigate the influence of physical functions of elderly people on their clothing behavior and to provide basic information about manufacturing comfortable apparels for the elderly. A total of 219 people, with ages between 60s and 70s, participated in the survey and in the experiment to correlate their tendency of wearing clothes with the state of their physical functions. About 78.5% of the elderly showed eyesight deterioration in the subjective evaluation. Elders in their 60s raised their arms higher up in overhead reach, and showed shorter distance between middle fingertips in behind back stretch and in back scratch than elders in their 70s. Also, the former stretched farther to the floor in standing trunk flexion, and maintained more steady in one leg stand and in tandem stance than the latter. The narrower the movement range of the upper limb joints was, the more the elderly preferred upper garments with full front opening to those with half or no opening. The more inflexible the upper limbs and waist and the more unbalanced the body was, the more likely the elderly put on pants while sitting on the floor. The time taken to button up the shirt and to put on and take off pants showed a positive correlation with the overhead reach, the behind back stretch, the back scratch and the standing trunk flexion, whereas the former showed a negative correlation with the one leg stand and the tandem stance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1339-1347
• /
• 2013

Creep through nanoindentations has attracted increasing research attention in recent years. Many studies related to indentation creep tests, however, have simply focused on the characteristics of steady-state creep, and there exist wide discrepancies between the uniaxial test and the indentation test. In this study, we performed a computational simulation of spherical indentations, and we proposed a method for evaluating the creep properties considering transient creep. We investigated the material behavior with variation of creep properties and expressed it using regression equations for normalized variables. We finally developed a program to evaluate the creep properties considering transient creep. By using the proposed method, we successfully obtained creep exponents with an average error less than 1.1 and creep coefficients with an average error less than 2.3 from the load-depth curve.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.395-404
• /
• 2012

This paper presents computations of the dynamic derivatives of three dimensional flight vehicle configurations using CFD. The pitch dynamic derivatives are computed from the pitch sinusoidal motion, while the roll damping is computed based on steady state calculation using a non-inertial frame method. The Basic Finner and the SDM(Standard Dynamic Model) are chosen for the benchmark tests against other numerical and experimental results. For the flow calculations, a 3-D Euler solver that can be run both on the non-inertial frame and on the inertial frame is developed. A dual-time stepping method is applied for the unsteady time accurate simulations. A good agreement of pitch-roll dynamic derivatives with previously published numerical results and the experimental results is observed.