• 대한치과교정학회지
• /
• 제28권1호
• /
• pp.75-83
• /
• 1998

본 연구는 교정 치료를 위한 진단과 치료 계획의 수립에 널리 이용되는 진단 수단의 하나인 두부 방사선 사진을 계측하는 연구에서 볼 수 있는 오류의 중요성을 인식하고, 반복 계측의 방법으로 체계적 오차(systematic error)를 찾아내고 임의적오차(random error)의 범위를 산출하는 과정을 통해 기준점의 식별에 보다 주의가 기울여져야 할 해부학적 기준점들을 찾아보고자 시행되었는데, 통법에 의해 촬영된 100장의 측모 두부 방사선 사진을 연구대상으로 하여 61개의 기준점과 130개의 계측항목을 선정하였고 반복계측을 위해 25개의 표본을 무작위로 선정, 계측오차를 분석하여 다음과 같은 결론을 얻었다. 1. 반복계측에 따른 계측치의 비교에서 130개 전체 계측항목의 18.4%인 24개 항목에서 유의성 있는 차이를 보였다. 2. 반복계측에서 기준점 식별에 차이를 보이는 빈도는 상악 전치의 치근단점(as), 상악골의 최후방벽(tu), 연조직 nasion과 전두정(ft) 그리고 기도의 ad3점에서 매우 높았다. 3. 5%이하의 유의도를 보이는 수준까지 기준점 마킹을 수정한 후, 임의적오차의 범위는 0.67-1.71mm또는 도를 보였다. 4. 가장 임의적오차를 보인 계측항목은 상, 하악 전치가 이루는 각(interincisal angle : ILs-ILi)이었다. 5. 계측 오차의 문제는 주로 해부학적 정의에 대한 정확성의 부족과 불분명한 방사선사진상에 기인되었다. 이상의 연구 결과로 두부 방사선 사진의 계측에는 많은 오류의 가능성이 있음을 확인할 수 있었고 이에 따라 두부방사선 계측에서 뿐 아니라 계측이 이루어지는 모든 연구에서는 항상 계측오류에 대한 분석이 함께 이루어져야 할 것이며, 조사자로서 뿐만 아니라 다른 연구자의 연구결과를 올바르게 인식하기 위한 목적으로도 오류에 대한 인식은 필수적인 것으로 생각된다.

• Journal of Chest Surgery
• /
• 제21권6호
• /
• pp.957-969
• /
• 1988

There is tendency of increasing number and decreasing age of patients who are indicated for Rastelli operation for their cyanotic congenita heart disease. So there is the need to find the creiterion which saves the patients from early postoperative hemodynamic disturbances. We reviewed the 26 patients who had been performed Rastelli operation at Seoul national University hOipital from January 1981 to June 1988. mean age of the patients was 7.8 $\pm$ 3.4 years (range 2.5-1.5 years), mean body surface area(BSA) 0.79 $\pm$ 0.25 $m^{2}$(range 0.49-1.51 $m^{2}$) and mean hematocrit 57.95 $\pm$ 12%(range 48-80%). We diveded these patients into survived group and died group before postoperative 72 hours, and analysed preoperative arterial oxygen saturation($SaO_{2}$), the ratio of diameter of fight pulmonary artery to ascending aorta(RA:/AA), the ratio of both right and left pulmonary artery diameter to descending thoracic aorta(RPA+LPA/DTA), pulmonary artery index(PA index), cardiopulmonary bypass time, aorta cross-clamping time, postoperative perfusion state and total amount of dopamine infused postoperatively. The results showed that RPA+LPA/DTA and PA index were statistically significatn factors to influence early postoperative cardiac death rate (P<0.05). Especially there were good linear correlations between PA index(X) and perpheral perfusion index(Y)(Y = -1.15 + 0.02 X, r = 0.86, P<0.01) and between PA index(X) and total amount of dopamine infused before postoperative 72 hours(mg/kg, Y)(Y = 61.94 - 0.15 X, r = - 0.80, P<0.01). Also there were tendencies that the higher RPA + LPA/DTA(Y), the betterperipheral perfusion (X) and the lower need of dopamine(X), but no statistical significance. (Y = 0.78 + 1.60 X, r = 0.49, P>0.05) And the discrimant analysis showed that patients with PA index over 221 $mm^{2}$/BSA could undergo correction with 25 per cent of error rate. In conclusion, early postoperative hemodynamic states could be predicted by preoperatively measured PA index, and which can be used as a criterion for Rastelli operation performed on cyanotic congenital heart disease.

• 한국도로학회논문집
• /
• 제6권2호
• /
• pp.1-13
• /
• 2004

본 논문은 정하중하에서 김테스트를 사용하여 아스팔트 콘크리트의 소성변형과 변형강도가 공시체에 크기에 미치는 영향에 대해 연구하였다. 2가지 골재(편마암, 화강암)와 6가지 아스팔트를 사용하여 총14개의 밀입도 혼합물을 사용하였다. 마샬 배합설계를 통해 최적아스팔트 함량을 구하고 결정된 최적아스팔트 함량으로 마샬공시체 (S=10cm)와 자이레토리 공시체(S=15cm)를 제작하여 마샬안정도시험, 휠트래킹시험, 개발된 김테스트(Kim test)를 수행하였다. SAS 분석을 통하여 공시체의 지름이 김테스트의 결과에 중요한 변수가 아닌 것을 알았으나 공시체의 두께는 $K_D$에 주용한 변수가 되는 것을 알았다. $K_D$값에 y값이 사용되어 영향을 미치는 것으로 판단되었다. 공시체의 두께를 6.6cm 이상으로 제작하여 김테스트에 적용 할때에는 마샬안정도에서와 같이 y 값에 따른 보정계수를 사용하거나 시험시 6.6cm 미만으로 제작하여야 할 것이다. 향후 보정계수 사용에 관한 연구도 가능할 것으로 판단된다.

• 한국안광학회지
• /
• 제17권1호
• /
• pp.59-65
• /
• 2012

목적: 본 연구는 굴절이상에 따른 조절래그의 분포와 연관성을 알아보고자 하였다. 방법: 양안시 기능에 문제가 없는 만18세~25세 이하 초년 성인을 대상으로 우안 49안, 좌안 49안(총 98안)의 굴절이상과 조절래그를 검사하였다. 조절래그는 LogMAR 시력 0.05(소수시력 0.9) 이상 완전교정한 후에 크로스실린더와 근거리 십자시표를 이용하여 단안과 양안을 측정하였다. 결과: 단안의 조절래그량은 우안 $0.64{\pm}0.64$ D, 좌안 $0.63{\pm}0.64$ D로 우안이 많았지만 통계적인 차이는 없었다(p=0.858). 양안에서는 남자가 1.50 ~ -0.75($0.31{\pm}0.44$)로 여자 0.50 ~ -0.75$-0.02{\pm}0.33$) 보다 평균값의 범위가 넓고 크게 나타났으며(p=0.015), 동공간 거리가 멀수록 조절래그량은 많았지만(p=0.003) 연령과 우위안에 따른 분석에서는 차이가 없었다(p=0.800, p=0.402). 굴절이상에 따른 조절래그 범위는 저도근시 0.75 ~ -0.25 D, 중등도 근시 1.25 ~ -0.50 D, 고도근시 1.50 ~ -0.75 D로 분포하였고 등가구면 굴절력과는 y = -0.03953x+0.09205의 관계식을 나타냈다. 결론: 조절래그는 등가구면 굴절력이 클수록 분포범위가 넓고 평균값이 높은 것으로 분석되었다.

• 대한치과교정학회지
• /
• 제47권2호
• /
• pp.108-117
• /
• 2017

Objective: To investigate the effects of frontal facial type (FFT) and sex on preferred chin projection (CP) in three-dimensional (3D) facial images. Methods: Six 3D facial images were acquired using a 3D facial scanner (euryprosopic [Eury-FFT], mesoprosopic [Meso-FFT], and leptoprosopic [Lepto-FFT] for each sex). After normal CP in each 3D facial image was set to $10^{\circ}$ of the facial profile angle (glabella-subnasale-pogonion), CPs were morphed by gradations of $2^{\circ}$ from normal (moderately protrusive [$6^{\circ}$], slightly protrusive [$8^{\circ}$], slightly retrusive [$12^{\circ}$], and moderately retrusive [$14^{\circ}$]). Seventy-five dental students (48 men and 27 women) were asked to rate the CPs ($6^{\circ}$, $8^{\circ}$, $10^{\circ}$, $12^{\circ}$, and $14^{\circ}$) from the most to least preferred in each 3D image. Statistical analyses included the Kolmogorov-Smirnov test, Kruskal-Wallis test, and Bonferroni correction. Results: No significant difference was observed in the distribution of preferred CP in the same FFT between male and female evaluators. In Meso-FFT, the normal CP was the most preferred without any sex difference. However, in Eury-FFT, the slightly protrusive CP was favored in male 3D images, but the normal CP was preferred in female 3D images. In Lepto-FFT, the normal CP was favored in male 3D images, whereas the slightly retrusive CP was favored in female 3D images. The mean preferred CP angle differed significantly according to FFT (Eury-FFT: male, $8.7^{\circ}$, female, $9.9^{\circ}$; Meso-FFT: male, $9.8^{\circ}$, female, $10.7^{\circ}$; Lepto-FFT: male, $10.8^{\circ}$, female, $11.4^{\circ}$; p < 0.001). Conclusions: Our findings might serve as guidelines for setting the preferred CP according to FFT and sex.

• 한국전자파학회논문지
• /
• 제25권3호
• /
• pp.348-356
• /
• 2014

기존의 ITU-R 모델은 강우 환경이 다른 국내 측정치와 편차가 크고, 실효 경로 길이가 주파수와 무관함에도 주파수의 함수로 되어 있으며, 강우셀의 물리적 특성이 반영되지 않은 경험 모델이라는 단점이 있다. 본 논문에서는 강우셀 개념을 이용한 실효 경로 길이 모델에 대한 이론 모델을 제안하고, 측정 데이터를 이용하여 제안 모델의 타당성을 검증하였다. 강우셀 파라미터의 통계적 특성 분석을 위하여 한국 기상청의 기상레이더 측정 데이터(CAPPI)를 분석하고, 한국전자통신연구원에서 측정한 천리안 비콘 수신 데이터를 이용하여 보정계수를 도입함으로써 측정치와 잘 일치하는 물리적 이론 모델을 도출하였다. 도출된 실효 경로 길이 모델의 검증을 위하여 국방과학연구소의 연구비 지원을 받아 충남대학교에서 측정한 무궁화 5호(Ka 대역) 위성 비콘신호 측정 데이터를 사용하여 비교하였으며, 제안한 실효 경로 길이 모델과 측정데이터가 잘 일치함을 확인하였다.

• 대한간호학회지
• /
• 제4권1호
• /
• pp.38-49
• /
• 1974

Presently, the performance level of the college student has received a great deal of attention, particularly in the area of professional education. The problem of under achievement, especially in areas dealing with science and technology, has gone through considerable investigation by numerous Psychologists and Educators. Thus for, however, they have not been successful in determining conclusively the non-intellectual factors involved. The maladjustment problem of these students has been a thorn in the side of nursing education for some time. This topic has been discussed among nursing educators without any tangible results. Furthermore, the fact that the number of students who withdraw from nursing education programs before graduation has increased. This represents a major problem for nursing education. This problem area had increased attention drawn to it on October 1957, when Russia successfully launched to first satellite "Sputnik" into space. Various studies seem to indicate that factors related to over achievement and under.achievement can be found in the motivation of the students. This study is aimed at testing 3 hypotheses which hopefully will lead to a better understanding of the learning activities of nursing students and to determine some of their nonintellectually personality traits. Hypothesis I: learning activities in nursing students and persona1ity are correlated, there will be significant differences in personality need structures between 4 classes of nursing collegiate students. Sub-hypothesis: There will also be significant differences in the degree of student satisfaction in her major subject. Hypothesis I: If there is a special personality need structure which is required for the clinical learning activity in general, then there will be significant differences between the personality need structures of under-achievers and overachiever. Hypothesis II : If each clinical nursing subject requires different personality need structures, then there will be differences in personality need structure between the different clinical groups Methodology: 1. Tool: A Korean translation and correction of the Edwards Personal Preference Schedule of U.S.A. was used. 2. Subject and Test Method: Subjects were nursing students at Yonsei University, who enrolled for Fall semester of 1971. The Researcher herself executed the test for the test for the class as a group, and the absent students were tested indidually. Out of 307 students, 293 students (95.4%) were reported. 3. Statistical treatment: The mean and standard deviation for each of the 15 personality need variables were computed and the value of T-test was obtained to determine the differences in the personality need structures between each group. Results: 1, For the first hypothesis, the personality need structures between each of the 4 classes and the reported degree of satisfaction in major subject showed significant differences. Therefore the hypothesis I was accepted. 2. The comparison of personality need structure of under-achievers and over-achievers in clinical fields showed significant differences. Thus hypothesis II was accepted. 3. Personality need structure between clinical subject groups showed significant differences therefore the 3rd hypothesis was accepted.

• 대한치과교정학회지
• /
• 제30권3호
• /
• pp.355-365
• /
• 2000

악교정수술에 관한 치료계획은 치료결과에 관한 정확한 예측을 바탕으로 수립되는 것이 바람직하며 이는 심미적인 결과를 얻기 위한 가장 중요한 요소 중에 하나이다. 성인에서 골격성 하악전돌증의 치료는 하악골후퇴술을 이용한 악교정수술법이 주로 이용되는데, 술후 턱끝의 돌출도가 과도하게 감소되어 하악전진이부성형술을 추가로 시행해야 하는 경우 하악골과 턱 부위의 연조직 변화방향이 상이하게 나타나므로 술후 연조직 변화를 정확히 예측하는데 한계가 있다. 본 연구에서는 골격성 하악전돌증을 주소로 악교정수술을 시행한 성인을 대상으로, 상행지시상분할골절단술(BSSRO)만을 시행한 경우(A군) 11명 과 하악전진이부성형술(advancement genioplasty)도 같이 시행한 경우(B군) 9명의 경조직과 연조직 변화의 상관관계를 알아보기 위하여, 수술 8개월 이후에 채득된 측모두부계측방사선사진을 비교하여 다음과 같은 결과를 얻었다. 1. E-line에 대하여 상순은 더 돌출되고 하순은 더 후퇴되어 입술의 형태가 개선되었으며, 하악전진이부성형술을 병행한 경우 하순의 돌출도는 더 개선되었다. 2. 두 군 모두에서 상순은 후방이동하고 비순각은 증가하였다. 3. 술후 B점에 대한 연조직 POGs점의 변화율은 A군에서 $84\%$, B군에서 $66\%$로 나타났으며 두 군간에 통계적 유의성이 있었다. 4. 경조직과 계측점의 수직변화량은 A군에서 감소하였다.

• Imaging Science in Dentistry
• /
• 제45권1호
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.244-251
• /
• 2017

PURPOSE. The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium disilicate (ML), and monolithic zirconia (MZ). MATERIALS AND METHODS. Co-Cr alloy three-unit metal FDPs model with maxillary first premolar and first molar abutments was fabricated. Three different FDPs groups, LZ, ML, and MZ, were prepared (n = 5 per group). The three-unit FDPs designs were identical for all specimens and cemented with resin cement on the prepared metal model. The region of pontic in FDPs was given 50,000 times of cyclic preloading at 2 Hz via dental chewing simulator and received a static load until fracture with universal testing machine fixed at $10^{\circ}$. The fracture resistance and mode of failure were recorded. Statistical analyses were performed using the Kruskal-Wallis test and Mann-Whitney U test with Bonferroni's correction (${\alpha}=0.05/3=0.017$). RESULTS. A significant difference in fracture resistance was found between LZ ($4943.87{\pm}1243.70N$) and ML ($2872.61{\pm}658.78N$) groups, as well as between ML and MZ ($4948.02{\pm}974.51N$) groups (P<.05), but no significant difference was found between LZ and MZ groups (P>.05). With regard to fracture pattern, there were three cases of veneer chipping and two interfacial fractures in LZ group, and complete fracture was observed in all the specimens of ML and MZ groups. CONCLUSION. Compared to monolithic lithium disilicate FDPs, monolithic zirconia FDPs and lithium disilicate glass ceramics pressed on zirconia-based FDPs showed superior fracture resistance while they manifested comparable fracture resistances.