• 한국측량학회지
• /
• 제18권4호
• /
• pp.369-378
• /
• 2000

본 연구는 구조물 안전진단 기초자료인 변위를 GPS를 이용하여 측정하는데 목적이 있으며, 실험대상인 금강 남측 도류제상에 설치한 2점의 변위관측점을 약 1년간 4개월 주기로 4？의 GPS 장비로 측정하여 그 3차원적 정적변위를 측정하였다. 또한, 보다 신뢰성 있는 해안구조물의 변위측정기법을 모색하기 위하여 기준점과 좌표계의 선정에 따른 변위관측정확도와 GPS관측변위의 신뢰성을 점검하는 방안에 대하여 검토하였다.

• 한국전문물리치료학회지
• /
• 제1권1호
• /
• pp.35-46
• /
• 1994

The purposes of this study were 1) to determine the relationship between antigravity control(supine flexion and prone extension) and postural control(static and dynamic balance) by age, 2) to determine the quality of antigravity and postural control, and 3) to determine whether sex difference correlates with differences in antigravity and postural control in young normal children. We tested 120 children aged 4 to 7 years. The study results showed a significant relationship between antigravity and postural control by age. Quality scale measurements(r=0.90) indicated that the children in this study had not yet developed full antigravity or postural control. The study results revealed differences between sexes(f>m in 5 of 7 tests) and a significant relationship by age in antigravity and postural control.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.22-23
• /
• 2006

High velocity compaction (HVC) is a production technique with capacity to significantly improve the mechanical properties of powder metallurgy (PM) parts. Investigated here are green body data such as density, tensile strength, radial springback, ejection force and surface flatness. Comparisons are performed with conventional compaction using the same pressing conditions. Cylindrical samples of a pre-alloyed water atomized iron powder are used in this experimental investigation. The HVC process in this study resulted in a better compressibility curve and lower ejection force compared to conventional quasi static pressing. Vertical scanning interferometry measurements show that the HVC process gives flatter sample surfaces.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.145-151
• /
• 2007

Electric load components have different characteristics according to the variation of voltage and frequency. This paper presents the load modeling of an electric locomotive by the parameter identification method. The proposed method for load modeling is very simple and easy for application. The proposed load model of the electric locomotive is represented by the combination of the loads that have static and dynamic characteristics. This load modeling is applied to the KTX in Korea to verify the effectiveness of the proposed method. The results of proposed load modeling by the parameter identification follow the field measurements very exactly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.129-131
• /
• 2005

This paper deals with an electromagnetic analysis and control parameter estimation of a moving-coil linear oscillatory actuator (MCLOA). Analytical solutions for electromagnetic characteristics of the MCLOA are obtained from transfer relations derived in terms of a magnetic vector potential and two-dimensional (2-d) rectangular coordinate systems. And then, on the basis of 2-d analytical solutions, control parameters such as the thrust constant, the back-emf constant and winding inductances are estimated. Finally, analytical results for both electromagnetic characteristics and control parameters of the MCLOA are validated extensively by finite element (FE) analyses. In particular, test results such as static thrust, resistance and inductance measurements are given to confirm the analyses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1634-1636
• /
• 2005

The electric load components have different characteristics against variation of voltage and frequency. This paper presents the load modeling of electric locomotive by the parameter identification method. Proposed method for load modeling is very simple and easy for application. Proposed load model of the electric locomotive is the combined load of the static and dynamic characteristic load. This load modeling is applied to the KTX to verify the effectiveness of the proposed method. The results of the proposed load modeling by parameter identification follow the field measurements very exactly.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.260-274
• /
• 2005

An experimental investigation was performed to study the characteristics of turbulent swirling flow in the cylindrical annuli. The swirl angle measurements were performed by flow visualization technique using smoke and dye liquid. By using the particle image velocimetry method. this study has found the time-mean velocity distribution and turbulent intensity with swirl for Re=20,000. 30.000. 50.000. and 70,000 along longitudinal sections. The results appear to be physically reasonable. Other experimental study was performed to investigate heat transfer characteristics of turbulent swirling air flow in axisymmetric annuli. The static pressure. the local air flow temperature, and the wall temperature with decaying swirl were measured by using thermocouples and the friction factor and the local Nusselt number were calculated for Re=30,000. 50,000 and 70000. The local Nusselt number was compared with that obtained from the Dittus-Boelter equation with swirl and without swirl, respectively. The results showed that the swirl enhances the heat transfer at the inlet and the outlet of the test tube.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.60.4-60
• /
• 2001

Electrical impedance tomograpy (EIT) determines the resistivity distribution inside an inhomogeneous target by means of voltage and current measurements conducted at the target boundary. In this paper, a genetic algorithm (GA) approach is proposed for the solution of the EIT image reconstruction. Results of numerical experiments of EIT solved by the GA approach are presented and compared to that obtained by the modified Newton-Raphson method. The GA approach is relatively expensive in terms of computing time and resources, and at present this limits the applicability of GA to the field of static imaging. However, the continuous and rapid growth of computing resources makes the development of real-time dynamic imaging applications based on GA´s conceivable in the near future.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.49-55
• /
• 2002

A new method is proposed for the on-line measurement of the fiber orientation of sheet materials. The measurement of fiber orientation is very important in manufacturing paper sheets, non-woven fabrics, and glass sheets, because fiber orientation strongly affects product properties represented by, for example, dimensional stability of paper. A method developed in this research utilizes anisotropy of dielectric constants of sheet materials as a key characteristic to determine the fiber orientation. The new on-line sensor, consisting of 5 microwave dielectric resonators set in different directions, was designed to detect the fiber orientation while paper is running with high speed on a paper machine. This sensor can determine the direction and the degree of fiber orientation from the measured direction of the maximal dielectric constant and its variation, respectively. The fundamental performance of this system was examined by the static measurement of printing grade paper, which gave a satisfactory result. Then, the dynamic measurements were done at a speed of 1,000 m/min by using a high-speed test-coating machine.

• Bulletin of the Korean Chemical Society
• /
• 제2권1호
• /
• pp.1-8
• /
• 1981

Electrochemical reduction of nitrobenzene and substituted nitrobenzenes on lead electrode was studied by galvano-static measurements and cyclic voltammetry in basic ethanol-water solvents. Nitroso compounds or hydroxylamines were detected as the main reduction product depending on the potential. Mechanisms of production and further reduction of substituted and unsubstituted nitrosobenzenes are deduced from Tafel slope, pH dependence and reaction order. The reduction of most of the substituted nitrobenzenes to corresponding nitrosobenzene derivatives seemed to follow the reaction mechanism of nitrobenzene reduction with a few exceptions. A Hammett type relationship between the magnitude of the reduction current and the kinds of substituents was found with the ${\rho}$ value of 0.54.