• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.895-902
• /
• 2012

In this paper, we propose a novel equalizer to compensate for the group delay including AM/PM nonlinear distortion characteristics by the nonlinear power amplifier (PA). The group delay characteristic is a nonlinear non-constant time delay that appears differently depending on each frequency component. The phase distortion by AM/PM characteristics arising from the power amplifier is a major factor to increase group delay. By the group delay distortion, the signal in the constellation expands and is rotated. Considering the problem mentioned above, the nonlinear time delay that appears differently depending on each frequency component is classified as a static group delay and AM/PM characteristic of PA, the different phase transitions depending on the size of input signal as a dynamic group delay. Static group delay estimates and compensate for phase distortions in the frequency domain with type-based method and dynamic group delay compensates for phase rotation in the time domain. We confirmed that the group delay compensation techniques were enough to compensate the group delay characteristics including AM/PM characteristics of the power amplifier.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.65-75
• /
• 1998

We consider connection-oriented wireless cellular networks such as the second generation wireless cellular networks and wirelss ATM networks. In these networks, a separate forward signaling channel is provided for the transmission of paging and channel allocation packets. When a call destined to a user is requested, all the base stations in the user's current location area broadcast the corresponding paging packet across forward signaling channels. By slot mode operation and paging group allocation for fusers in a location area, we can reduce relative power consumption level at battery-operated terminals. However, a sthe number of paging groups is increased for lowering relative power consumption level, a paging packet experiences higher delay to access the forward signaling channel. For the pre-negotiated quality-of-service level, paging packet delay level must be limited. In this paper, we consider static and dynamic multiplexing schemes for paging packets, and develop an analytical method for calculating paging packet delay and relative power consumption levels. Using this analytial method, we investigate the effect of network parameters on the paging packet delay and relative power consumption levels.

• Geomechanics and Engineering
• /
• v.15 no.2
• /
• pp.745-754
• /
• 2018

In the analysis of the effects of rock tunnel blasting vibration on adjacent existing buildings, the model of simplified equivalent load produces higher calculation result of vibration, due to the lack of consideration of the millisecond delay effect. This paper, based on the static force equivalence principle of blasting load, proposes a new determination method of equivalent load of blasting vibration. The proposed method, based on the elastic-static force equivalence principle of stress wave, equals the blasting loads of several single blastholes in the same section of millisecond blasting to the triangle blasting load curve of the exploded equivalent elastic boundary surface. According to the attenuation law of stress wave, the attenuated equivalent triangle blasting load curve of the equivalent elastic boundary is applied on the tunnel excavation contour surface, obtaining the final applied equivalent load. Taking the millisecond delay time of different sections into account, the time-history curve of equivalent load of the whole section applied on the tunnel excavation contour surface can be obtained. Based on Sailing Tunnel with small spacing on Sanmenxia-Xichuan Expressway, an analysis on the blasting vibration response of the later and early stages of the tunnel construction is carried out through numerical simulation using the proposed equivalent load model considering millisecond delay effect and the simplified equivalent triangle load curve model respectively. The analysis of the numerical results comparing with the field monitoring ones shows that the calculation results obtained from the proposed equivalent load model are closer to the measured ones and more feasible.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.334-343
• /
• 2014

In this paper, we suggest a method to improve the fusion of an accelerometer and gyro sensor by using a Kalman filter to produce a more high-quality respiration signal to supplement the weakness of using a single accelerometer. To evaluate our proposed algorithm's performance, we developed a chest belt-type module. We performed experiments consisting of aerobic exercise and muscular exercises with 10 subjects. We compared the derived respiration signal from the accelerometer with that from our algorithm using the standard respiration signal from the piezoelectric sensor in the time and frequency domains during the aerobic and muscular exercises. We also analyzed the time delay to verify the synchronization between the output and standard signals. We confirmed that our algorithm improved the respiratory rate's detection accuracy by 4.6% and 9.54% for the treadmill and leg press, respectively, which are dynamic. We also confirmed a small time delay of about 0.638 s on average. We determined that real-time monitoring of the respiration signal is possible. In conclusion, our suggested algorithm can acquire a more high-quality respiration signal in a dynamic exercise environment away from a limited static environment to provide safer and more effective exercises and improve exercise sustainability.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.791-800
• /
• 2009

Multicasting is fundamental to many ad hoc network applications requiring collaboration of multiple nodes in a group. A general approach is to construct an overlay tree and to deliver a multicast packet to multiple receivers over the tree. This paper proposes adaptive overlay trees (AOTs) on wireless ad hoc networks of static nodes for delay- and energy-efficient multicast. A tradeoff function is derived, and an algorithm for AOT construction is developed. Note here that the requirements of delay and energy consumption may vary with different classes of applications. By adjusting parameters in the tradeoff function, different AOTs can be adaptively chosen for different classes of applications. An AOT is constructed in O(ke) time where e is the number of wireless links in a network and k is the number of member nodes in a multicast group. The simulation study shows that AOT adaptively provides tradeoffs between the fastest multicast (which is the choice if delay is the most important factor) and the most energy efficient multicast (which is used when energy consumption is the primary concern). In other words, one of AOTs can be appropriately chosen in accordance with the operation requirement.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.907-916
• /
• 2005

RMCP is an application layer multicast protocol and was established as a standard by ITU-T Also, RMCP includes a scheme which can statically construct a multicast tree. In this paper, we propose a QoS based tree construction scheme which can dynamically construct a multicast tree. And this scheme shows more superior performance than the static tree scheme of RMCP in terms of start-up delay and user requirement QoS. This scheme consists of a best-fit method using multiple sub-net groups which are satisfied a user requirement QoS and a first-fit method using one sub-net group which has maximum transmission bandwidth. In simulation result, two proposed methods are superior to the existing static tree scheme.

• Journal of Embryo Transfer
• /
• v.27 no.3
• /
• pp.141-147
• /
• 2012

This study was operated to establish induction using ultrasonography by estimating the relation of follicle size and estrus manifestation. Clinical estrus symptoms were observed 97.4% in cows and 87.5% in heifers when overall 55 cows were induced to estrus in a single dose of $PGF_{2{\alpha}}$ after verifying CL through ultrasonography, which means estrus hours among those 52 cows showing the clinical estrus symptoms were estimated 2.39 days on cows and for 2.37 days on heifers which showed no differences (p>0.05). The estrus manifestation hours according to the follicle size in cows didn't have any significance each other (p>0.05), though estrus hours was 54 hours (the shortest) with follicle size bigger than 10 mm and were made up within 69 hours. The estrus manifestation hours according to the follicle size in heifers didn't have any significance each other (p>0.05) and took around 42 hours (the shortest) with follicle size of 5mm (the smallest) and were made up within 66 hours. Follicles after $PGF_{2{\alpha}}$ injection were ovulated and assigned to many phases as follows; Group 1 (growing phase) - continuously growing into ovulation, Group 2 (growing and static phase) - delaying in growth after the growth of follicles, Group 3 (static and growing phase) - growing after growth delay, Group 4 (regressing and new growing phase) - the follicle is closed and a new follicle grows. In addition, the process of follicle development and estrus hours had no significance each other (p>0.05), though estrus manifestation hours in Group 1 and 2 was relatively short, and in Group 3 and 4 for a relatively long time. In the result of all above, the estrus manifestation hours after $PGF_{2{\alpha}}$ injection has no differences accoring to the follicle size in cows and heifers. Therefore, High pregnancy rate is obtained when practicing artificial insemination within 3 days in estrus or TAI in 72 to 80 hours after adminitrating $PGF_{2{\alpha}}$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.1-6
• /
• 2014

The IoT (Internet of Things) is considered as a core technology to realize interconnected world. At this, companies composing ICT industry and standard organizations make efforts to accelerate it. IETF CoRE(Constrained RESTful Environment) working group standardized CoAP (Constrained Application Protocol) for the constrained device. CoAP has RESTful architecture and CoAP option is provided to use forward-proxy. The forward-proxy is used to translate protocol and perform requests on behalf of the client. However, communication between Internet based client and LLN(Low-power and Lossy Network) based CoAP server architecture has limitations to deploy real IoT service. In this architecture, problems like response delay, URI assignment and DoS attack can be occurred. To solve these problems, we propose the reverse-proxy based system. We consider both of static IoT and mobility IoT environments. Finally, our proposed system is expected to provide efficient IoT service.