• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.115-128
• /
• 2004

In this study, optical and mechanical properties were investigated with 4 kinds of commercial dental enamels. As a result of EDS analysis $SiO_2,\;Na_{2}O,\;Al_{2}O_3\;and\;K_{2}O$ were the main components of commercial dental enamels. In case of H specimen, content of $SiO_2\;and\;K_2O$ were more than that of another specimens. Starting powder and fired specimens were glass ceramics which were consist of amorphous phase and leucite (crystalline) phase. Crystallization did not occurred during firing process, since the XRD peak intensity was similar between starting powder and fired specimens. As a result of differential thermal analysis, $T_g$ and crystalline temperature was varied with composition in the range of $548\sim576^{\circ}C$ and $735\sim780^{\circ}C$ respectively. 0.5mm thickness dental enamel specimens showed sufficient translucent properties. However, transmittance and reflectance were lower than 5% result from scattering due to the refractive index difference between glass and crystalline phase. 3 point bending strength was in the range of 73.9$\sim$101.8MPa which was similar or slightly higher than enamel of natural teeth and Vickers hardness was higher than enamel of natural teeth more than 100.

• Journal of Korean Biological Nursing Science
• /
• 제10권2호
• /
• pp.113-120
• /
• 2008

Purpose: The aim of this study is to evaluate the effect of music therapy according to preferred music and to identify the effect of duration time and starting point of music therapy on anxiety and vital signs in spinal anesthesia operations. Method: These subjects were categorized into three groups based on the order of the date of operation. Data on anxiety and vital signs for this study were collected from them. The collected data were analyzed by $X^2$-test, t-test, paired t-test and ANCOVA. Result: The results of this study showed that preferred music, differences of duration times and starting points of music therapy didn't make significant differences in anxiety and vital signs among the three groups. However for anxiety, there was a meaningful difference within three groups. This result indicates even randomly chosen music by nurses considering the patients' age makes a meaningful difference in anxiety. Conclusion: Based on the results of this study, the conclusion can be made that music therapy is a useful nursing implementation to reduce anxiety in patients undergoing operations with spinal anesthesia.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.738-746
• /
• 1997

MgO clinker and two kinds of dolomite clinkers with different microstructures and CaO contents were used as starting materials, and the effects of Fe2O3 addition on the properties of MgO and dolomite were investigated in the range of 2 to 8 wt% of Fe2O3 content. Secondary phases contributed to densification of MgO-Fe2O3 and dolomite-Fe2O3 were magnesioferrite and dicalciumferrite, respectively. Sinterabilities of MgO-Fe2O3 and dolomite-Fe2O3 were directly proportional to the amount of secondary phases. Also, sinterability of dolomite itself was dependent on the microstructure of starting material including distribution of CaO and MgO as well as the addition amount of Fe2O3. The flexural strength of MgO-Fe2O3 content was almost constant. The hydration resistance of dolomite with large size of MgO and discontinuous distribution of CaO was higher than that of dolomite with small size of MgO and continuous distribution of CaO. Also, the minimum content of Fe2O3 to prevent they hydration of dolomite was about 4wt%. As increasing Fe2O3 content, the penetration resistance of MgO-Fe2O3 was improved by the increment of magnesioferrite. On the other hand, the penetration resistance of dolomite-Fe2O3 was decreased because of the increment of dicalciumferrite having low melting point.

• 한국결정학회지
• /
• 제8권2호
• /
• pp.89-96
• /
• 1997

본 연구는 fine ceramics의 합성법을 traditional ceramics의 합성에 적용하는 연구의 일환으로 내화재료용 mullite합성법을 개발하고자 한다. 출발원료로는 알루미나 함량이 높은 하동 kaolin 과 boehmite를 사용하였으며 합성법은 gel coating법을 사용하였다. 그 결과 1350℃에서 미반응 silica와 corundum이 존재하지 않는 단일상의 mullite를 합성할 수 있었으며 1700℃로 소성한 분말의 경우 mullite 생성율은 80%로 나타났다. 이 때 부피비중은 2.56, 흡수율은 1.9%, 상온꺽임강도는 169 MPa의 값을 나타내어 우수한 내화재료로의 활용이 가능하다고 생각된다.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.90-101
• /
• 1992

선박이 일정속도 이상의 전진속도를 갖일 때의 조종성능 평가법은 지금까지 많이 제안되어 왔으나, 이들을 항만내에서의 다양한 운동모드 즉, 출발, 정지, 후진, 미속조종 등에는 적용에 무리가 있다. 본 연구에서는 출발, 정지, 후진, 미속조종 등을 포함하는 저속항행시의 조종운동 특성의 평가법을 제안하기 위해서, 대각도 횡류각 뿐만 아니라 광범위한 프로펠러 작동하에서의 선체, 프로펠러, 타에 작용하는 유체력의 특성을 수식모형화 하였다. 제안된 수식모형을 이용하여 액화가스 운반선, 대형유조선 두 선박에 대해 저속항행시의 조종운동 시뮬레이션 계산을 수행하여 실선시험 또는 모형시험 결과와 비교, 검토하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.294-299
• /
• 2003

The efficiency of complex slurry preparation route for the development of high performance RS-SiCf/SiC composites has been investigated. The green bodies for RS-SiC and RS-SiCf/SiC composite materials prior to the infiltration of molten silicon were prepared with various C/SiC complex matrix slurries, which associated with both different sizes of starting SiC particles and blending ratios of starting SiC and carbon particles. The reinforcing materials in the composite system were uncoated and C coated Tyranno SA SiC fiber. The characterization of RS-SiC and RS-SiCf/SiC composite materials was examined by means of SEM, EDS and three point bending test. Based on the mechanical property-microstructure correlation, process optimization methodology is discussed.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.477-488
• /
• 2013

The PLC (Programmable Logic Controller) has been widely used to implement real-time controllers in nuclear RPSs (Reactor Protection Systems). Increasing complexity and maintenance cost, however, are now demanding more powerful and cost-effective implementation such as FPGA (Field-Programmable Gate Array). Abandoning all experience and knowledge accumulated over the decades and starting an all-new development approach is too risky for such safety-critical systems. This paper proposes an RPS software development process with a platform change from PLC to FPGA, while retaining all outputs from the established development. This paper transforms FBD designs of the PLC-based software development into a behaviorally-equivalent Verilog program, which is a starting point of a typical FPGA-based hardware development. We expect that the proposed software development process can bridge the gap between two software developing approaches with different platforms, such as PLC and FPGA. This paper also demonstrates its effectiveness using an example of a prototype version of a real-world RPS in Korea.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.49-55
• /
• 2017

Robots, games and life applications have been developed while computer areas are developed. Moreover, various applications have been utilized for various users including the early childhood. Recently, smart phones have been dramatically used by various users including early childhood. Many applications need to find a path from a starting point to destinations. For example, without using real maps, users can find the direct paths for the destinations in realtime. Specifically, path exploration in game programs is so important to have accurate results. Nowadays, with these techniques, diverse applications for educations of early childhood have been developed. To deal with the functions, necessity of efficient path search programs with high accuracy becomes much higher. In this paper, we design and develop a friendly maze program for early childhood based on a path searching algorithm. Basically, the path of lineal distance from a starting location to destination is considered. Moreover, weight values are calculated by considering heuristic weighted h(x). In our approach, A* algorithm searches the path considering weight values. Moreover, we utilize depth first search approach instead of breadth first search in order to reduce the search space. so it is proper to use A* algorithm in finding efficient paths although it is not optimized paths.

• 한국컴퓨터산업학회논문지
• /
• 제9권4호
• /
• pp.149-156
• /
• 2008

애니메이션 영상에서 현재 블록의 움직임 벡터와 이전 블록의 움직임 벡터는 시간적 상관성을 갖고 있다. 본 논문에서는 영상의 시간적인 특성과 움직임 벡터의 중심 분포 특성을 이용하는 장면전환 검출 알고리즘을 제안한다. 제안된 알고리즘은 이전 프레임 블록으로부터 예측된 움직임 벡터와 분할된 탐색 구간에 속하는 후보 벡터 중에서 가장 작은 SAD 값을 갖는 점을 정확한 움직임 벡터를 찾기 위해서 초기 탐색점 위치로 결정한다. 실험 결과 제안된 방식은 기존의 대표적인 장면전환 검출 방식들 보다 재요청 측면에서 더 좋은 성능을 나타내었으며, 제안된 방법은 빠르고 정확하며 저장 공간을 적게 사용하는 장점을 가진다.

• 소성∙가공
• /
• 제15권8호
• /
• pp.550-555
• /
• 2006

In this study, effects of forming angle and friction coefficient on a initiation of the Mannesmann hole defect were analyzed by using a response surface method. The maximum effective plastic strain at center point of specimen is utilized for the prediction of the starting point of crack occurrence, which is suggested by the comparison of integrals of four different ductile fracture models between the histories of the effective plastic strain at center point. It was revealed that the principal stress at the center is the dominant element to the increase of the effective plastic strain. It was also verified by the simulation results from the comparison of experiment and simulation. It is provided that the forming angle of 25 degrees and the spreading angle of 1 degree can be a proper design condition without an occurrence of internal hole defect and an excessive slip.