• 한국시뮬레이션학회논문지
• /
• 제24권3호
• /
• pp.17-26
• /
• 2015

생산성과 웨이퍼의 품질을 향상하기 위해 다양한 공정에서 사용되는 클러스터 장비는 단순한 구성에도 불구하고 병렬 공정모듈, 중간버퍼의 부재, 시간 제약 때문에 스케줄이 쉽지 않다. 그래서 스케줄링에 대한 많은 연구가 진행되었지만 대부분 시간이 변동되지 않는다는 가정 하에서 주기별로 동일한 스케줄이 반복되는 안정 상태를 연구하였다. 본 연구에서는 시간 제약을 만족시키면서도 원하는 안정 상태의 스케줄로 안착할 수 있는 스케줄 전략을 제시한다. 제안된 스케줄 전략은 작업시간이 지속적으로 변동되는 상황에서도 강건하다. 마지막으로 이 전략들이 실제로 강건하고, 원하는 안정 상태로 갈 수 있다는 것을 보여주기 위하여 시뮬레이션을 수행한다.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.1-8
• /
• 2011

In this paper, inverse building modeling was applied to building perimeter zones which have different window orientation. Two test zones of east-facing and west-facing zones in ERS(Energy Resource Station) building, which is representative of small commercial building, was used to test performance of cooling load calculation and peak cooling load reduction. The dynamic thermal load model for the east and west zone was validated using measured data for the zones and then it was used to investigate the effect of peak cooling load reduction by adjustment of indoor cooling temperature set points during on-peak time period. For the east zone, the peak load can be reduced to about 60% of the peak load for conventional control even without any precooling. For the west zone, PLR is nearly independent of the start of the on-peak period until a start time of 1pm. Furthermore, PLR has a small dependence on the precooling duration. Without any precooling, the peak cooling load can be reduced to about 35% of the peak load associated with conventional control.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.44-51
• /
• 2019

Tunnel Boring Machine's Technology has depends mostly on imports, currently domestic technology development was proceeding. There are many technologies in this field, above all, the large-capacity motor drive technology required for excavation is one of the core technologies. In particular, when several large motors are simultaneously starting, there are many problems due to a large starting current at that time, and it is difficult to design and operate a power receiving facility. In this paper, A method of reducing the starting current by using the regenerative power generated by the deceleration of the motor has been studied. To verify this proposal, we designed the induction motor controller using CAE based power simulation tool and verified the results of the proposed method by applying the reduced model. As a result, it is possible to reduce the maximum starting current and shorten the start-up time. Moreover, even if several motors are connected to one bank, it is proved that the method can be efficiently operated by using the sequential braking / starting sequence. In the case of a power system in which a large capacity electric motor such as a tunnel excavation system is driven, the results of this study are expected to be a stable and effective method for solving the start-up current problem and designing the power receiving facility.

• 한국컴퓨터정보학회논문지
• /
• 제28권12호
• /
• pp.79-87
• /
• 2023

본 연구는 조선소 소조립 공정에서 스키드 투입 순서 최적화를 통해 전체 작업시간을 단축시키는 새로운 유전 알고리즘 방법을 제안한다. 하나의 해는 스키드 번호들의 순열로 표현되며 그러한 표현에 적합한 유전 연산자들을 적용하였다. 또한 탐색 성능의 개선을 위해 UniDev라 불리우는 기존의 휴리스틱 알고리즘을 적절하게 변형하여 유전 알고리즘과 결합하였다. 특히 UniDev에서 느린 스키드 탐색 부분을 그리디 알고리즘의 형태로 변경하였다. 매우 큰 규모의 문제에 대해 시뮬레이션을 수행한 결과 Multi-Start 탐색과 UniDev기반 혼합형 유전알고리즘에 비해 본 연구에서 제안하는 방법이 안정적으로 작업시간을 최소화함을 관찰하였다.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.141-146
• /
• 2024

Station blackout (SBO) risk is one of the most significant contributors to nuclear power plant risk. In this paper, the sequence probability formulas derived by the convolution approach are compared with those derived by the conventional event tree/fault tree (ET/FT) approach for the SBO situation in which emergency diesel generators fail to start. The comparison identifies what makes the ET/FT approach more conservative and raises the issue regarding the mission time of a turbine-driven auxiliary feedwater pump (TDP), which suggests a possible modeling improvement in the ET/FT approach. Monte Carlo simulations with up-to-date component reliability data validate the convolution approach. The sequence probability of an alternative alternating current diesel generator (AAC DG) failing to start and the TDP failing to operate owing to battery depletion contributes most to the SBO risk. The probability overestimation of the scenario in which the AAC DG fails to run and the TDP fails to operate owing to battery depletion contributes most to the SBO risk overestimation determined by the ET/FT approach. The modification of the TDP mission time renders the sequence probabilities determined by the ET/FT approach more consistent with those determined by the convolution approach.

• 산업경영시스템학회지
• /
• 제24권66호
• /
• pp.19-26
• /
• 2001

I propose the control chart pattern to provide a more comprehensive scheme for detecting process X and R shifts using individual observations in start-up process. It is important to automate the identification of special disturbances to facilitate real-time manufacturing. This papers formulates X-R charts for interpretation by artificial neural networks. In this papers, which uses the backpropagation algorithm, two samples are fed into the trained neural network to provide outputs ranging from 0 to 1. Simulation results sow that the performance of the proposed control chart using the neural network(NNCC) is quite promising. Using these NN charts, guidelines are given for detecting and classifying process X and R shifts.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.114-122
• /
• 1997

Nowadays, gasoline direct injection engines are being commercialized by virtue of improvement in control technology of spray, flow, air fuel ratio. The stratified charge type has the advantage of improving lean limit. The homogeneous type has the advantage of reducing engine-out hydrocabon emissions in the first 30 seconds after a cold start, in addition, improving transient air fuel ratio control. The vaporization and mixing if injected fuel with air has to e completed in a short time and the fuel film in cylinder and on piston has to be minimized. So, the flow and injection should be well controlled. This paper surveyed the spray characteristics of gasoline direct injection by using laser equipment and the combustion characteristics of the single cylinder engine using homogeneousas-mixture type gasoline direct injection.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권4호
• /
• pp.100-108
• /
• 1997

기동 돌입전류가 없는 역률개선을 위한 강압형과 승합형이 결합된 형태의 새로운 푸시풀 퀀텀 직렬공진형 정류기를 제안한다. 제안된 정류기의 동적모델링을 개발하여 기동 돌입전류를 제거하는 제어기법을 제안하였으며 컴퓨터 시뮬레이션과 실험을 통하여 제안된 정류기와 제어기법의 유용성을 보였다. 제안된 방식으로 고역률과 넓은 출력진압 범위를 얻었다.

• 한국유체기계학회 논문집
• /
• 제9권6호
• /
• pp.17-21
• /
• 2006

The numerical simulations on the train entering a tunnel were performed by solving unsteady axi-symmetric problems. In the case that 5th order velocity profile is used to reduce the effects of the pressure wave generated by the train starting abruptly, the effect of the initial distance between the train and the tunnel were examined. The impulsive start gives undesired pressure disturbances to the flow field including inside the tunnel. But 5th order velocity profile with initial distance more than 80 m gives much stable pressure variance in time, and pressure distribution inside the tunnel in space. The distance to the train reaches the highest running velocity from the start should be more than 80 m when the train speed is 350 km/h.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.335-340
• /
• 2000

Most vehicle's exhaust emissions come from the cold transient period of the FTP-75 test. In this study, UEGI technology was developed to help close-coupled catalytic converter (CCC) reach light-off temperature within a few seconds after cold-start. In the UEGI system, unburned exhaust mixture is ignited by four glow plugs installed upstream of the catalyst. Experimental results showed that the temperature of CCC rises faster with the UEGI technology, and the CCC reaches light-off temperature earlier. Under the conditions tested, the light-off time of the baseline case was 62 seconds and that of the UEGI case was 33 seconds.