• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.77-98
• /
• 2020

Recently, the government provided about 35 trillion won to start-ups through a large amount of start-up support funds from the Korea Credit Guarantee Fund and the Korea Development Bank, and more than 100 trillion won to start-ups over the past three years.(2015-2018) The Ministry of SMEs and Startups announced that a total of 1.4517 trillion won will be supported by 16 ministries (90 projects) after surveying start-up support projects by ministries in 2020 to create a start-up country. Indeed, among the budgets supported by the Ministry of SMEs and Startups, startups accounted for 85%, while scale-ups (growth and maturity) were only 15%. However, the survival rate of Korean start-ups was far lower than that of developed countries. The survival rate for the three years after the start-up was 39.1 percent, with only about 4 out of 10 surviving, with 27.5 percent surviving for five years, and only 3 out of 10 surviving. On the other hand, overseas start-ups have a survival rate of twice as high as that of Korea for five years. Accordingly, this study aims to empirically analyze and examine the need for research on nascent entrepreneurs, which have recently been actively supported by the government, as well as the impact of start-up motivation and start-up preparation on the intention to continue business. The survey was conducted from April 1 to May 15, 2020 for nascent entrepreneurs nationwide, and 222 of the total 245 copies were analyzed, and the questionnaire was measured using the Likert 5-point scale. As a result of the analysis, first, all factors constituting start-up motivation were adopted by significantly affecting start-up satisfaction. In addition, among the sub-factors of nascent entrepreneurs' preparation, item preparation was adopted as a significant influence on start-up satisfaction. Second, the nascent entrepreneurs' satisfaction level was adopted by having a significant impact on the business continuity. Third, some of the motivations for self-realization of the motivation for start-ups were adopted by having a significant impact on the business continuity. In addition, the preparation of items for the start-up preparation of nascent entrepreneurs was partially adopted as they had a significant impact on the business continuity. Fourth, it was adopted by the mediation effect of start-up satisfaction between the motivation of the nascent entrepreneurs' preparation and the business continuity. In addition, it was adopted by the medium effect of start-up satisfaction between the nascent entrepreneurs' preparation and the business continuity. Based on the results of these studies, it is intended to draw practical implications, and to provide useful policy implications to increase nascent entrepreneurs' satisfaction and continue to carry out their start-ups.

• Journal of applied mathematics & informatics
• /
• v.36 no.1_2
• /
• pp.93-105
• /
• 2018

There are many metric functions in the plane. In this paper we are to classify the metric functions on the plane using two ways such as using sum of distances between some points when start point and end point is fixed, and using area of transferred triangle consisted of distances between 3 points.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.86-89
• /
• 2018

This paper introduces a ZigBee network-based four-lane lap time measurement system that can be set up for short-distance races. The instructions "Ready-Set-Go" can be announced at the entry point node when the start button is pushed, and foot switches installed at the exit point node can be stepped on by the runner for lap time measurement of the race. The start and exit point nodes are connected to a ZigBee network to communicate time synchronization packets. The exit point node maintains synchronized local time within 10 ms at most. The system does not need expensive measurement equipment and provides lap time recording in a more convenient manner than conventional lap time measurement methods.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.6
• /
• pp.321-328
• /
• 2017

We have implemented a technique to correct the brightness, saturation, and contrast of an image according to the degree of light, and further compensate the backlight. Backlight compensation can be done automatically or manually. For manual backlight compensation, we have to select the region of interest (ROI). ROI can be selected by connecting the outline of the desired object. We make users select the region delicately with the new magnetic lasso tool. The previous lasso tool has a disadvantage that the start point and the end point must be connected. However, the proposed lasso tool has the advantage of selecting the region of interest without connecting the start point and the end point. We can automatically obtain various results of backlight compensation by adjusting the number of k-means clusters for texture extraction and the threshold value for binarization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.672-680
• /
• 2007

Apparatus of rotating disk and cup are widely used spray paintings and industrial boilers. This study was conducted experimentally to investigate the characteristics of liquid atomization in a rotating disk atomizer by means of viscous liquid mixed water and glycerin. The Purpose of this study are to observe breakup mechanism according to the variation of supplied flow rate $0.4{\sim}30 cm^3/s$ and rotating speed $200{\sim}4000rpm$, and to investigate three kinds of breakup Pattern such as drop ligament and film formation by comparing the transition flow rate. ligament number and ligament length to those of Tanasawa and Matsumoto's empirical formula. The results are as follows ; The higher it makes use of viscous liquid. the better it get the characteristics of breakup mechanism. Also When I compared practical value with experiential value at similar test conditions. it was shown similar tendency though were a little variation.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.14-26
• /
• 2011

In this paper, we've studied Optical Fiber Subscribe Transmit system. After receiving the ATM cell passing through the FIFO of the Asynchronous Transfer Method from the ATM Layer images to the VC4 signal payload passing through scrambling of the cell payload, HEC computation of the cell and inserting the Idle/Unassigned cell. At this time formed VC4 signal passing through the generating and inserting POH overhead at the same time indicating the start point of the cell by the H4 byte on the VC4 POH. This ATM cell transmits 155Mbps speed changing the optical signal after outputting the frame format at the STM-1 signal generation block through the AUG bus after generating J1 of the VC4 start point at the AU4 pointer generation block.

• Journal of Information Processing Systems
• /
• v.17 no.5
• /
• pp.879-891
• /
• 2021

With improvements in living conditions, an increasing number of people are choosing to spend their time traveling. Comfortable tour routes are affected by the season, time, and other local factors. In this paper, the influencing factors and principles of scenic spots are analyzed, a model used to find the available routes is built, and a multi-route choice model based on a game theory utilizing a path recommendation weight is developed. A Monte Carlo analysis of a tourist route subjected to fixed access point conditions is applied to account for uncertainties such as the season, start time, end time, stay time, number of scenic spots, destination, and start point. We use the Dijkstra method to obtain multiple path plans and calculate the path evaluation score using the Monte Carlo method. Finally, according to the user preference in the input path, game theory generates path ordering for user choice. The proposed approach achieves a state-of-the-art performance at the pseudo-imperial palace. Compared with other methods, the proposed method can avoid congestion and reduce the time cost.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.676-687
• /
• 2015

Path planning algorithms are used to allow mobile robots to avoid obstacles and find ways from a start point to a target point. The general path planning algorithm focused on constructing of collision free path. However, a high continuous path can make smooth and efficiently movements. To improve the continuity of the path, the searched waypoints are connected by the proposed polynomial interpolation. The existing polynomial interpolation methods connect two points. In this paper, point groups are created with three points. The point groups have each polynomial. Polynomials are made by matching the differential values and simple matrix calculation. Membership functions are used to distribute the weight of each polynomial at overlapped sections. As a result, the path has $G^2$ continuity. In addition, the proposed method can analyze path numerically to obtain curvature and heading angle. Moreover, it does not require complex calculation and databases to save the created path.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.5
• /
• pp.1015-1021
• /
• 2011

A point of a Riemann surface X is said to be its fixed point if it is a fixed point of one of its nontrivial holomorphic automorphisms. We start this note by proving that the set Fix(X) of fixed points of Riemann surface X of genus g${\geq}$2 has at most 82(g-1) elements and this bound is attained just for X having a Hurwitz group of automorphisms, i.e., a group of order 84(g-1). The set of such points is invariant under the group of holomorphic automorphisms of X and we study the corresponding symmetric representation. We show that its algebraic type is an essential invariant of the topological type of the holomorphic action and we study its kernel, to find in particular some sufficient condition for its faithfulness.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.415-418
• /
• 1996

Etching Process, one of the most important process in semiconductor fabrication, has input control part of which components are pressure, gas flow, RF power and etc., and plasma gas which is complex and not exactly understood is used to etch wafer in etching chamber. So this process has not real-time feedback controller based on input-output relation, then it uses EPD(End Point Detection) signal to determine when to start or when to stop etching. Various type EPD controller control etching process using EPD signal obtained from optical intensity of etching chamber. In development EPD controller we concentrate on compensation of this signal intensity and setting the relative signal magnitude at first of etching. We compensate signal intensity using neural network learning method and set the relative signal magnitude using fuzzy inference method. Potential of this method which improves EPD system capability is proved by experiences.