• Korean journal of food and cookery science
• /
• v.8 no.1
• /
• pp.9-14
• /
• 1992

The morphological properties of acorn starch granules and starch gels were examined with scanning electron microscope and X-ray diffractometer. The shape of acorn starch granule was rounded triangular and some elliptical. The size distribution of starch granule was also analyzed. The mean value of minor axis, major axis and the ratio of those were 4.785 $\mu\textrm{m}$, 7.30 $\mu\textrm{m}$ and 0.68, respectively. The surface micro-structure of acorn starch gels were investigated by SEM. Acorn crude and refined starch gel were very different in surface micro-structure. X-ray diffraction pattern of acorn starch was C-type, and the pattern of acorn starch gels were extremely different because of disintegration of starch granules by gelatinization. The diffraction intensity of acorn refined starch gel was slightly higher than crude starch gel.

• Food Science and Biotechnology
• /
• v.16 no.3
• /
• pp.485-488
• /
• 2007

Plentiful amount of spent yeast has been produced as a by-product from breweries. ${\beta}-Glucan$ was prepared from the spent brewer's yeast in a crude form with hot water extraction and subsequent enzymatic treatment. The crude ${\beta}-glucan$ preparation consisted of mainly glucan (53% of total wt), containing approximately 35% ${\beta}-glucan$ content of total weight. The effects of crude ${\beta}-glucan$ substitution (1-9%) on pasting properties of wheat flour and starch were determined using a Rapid Visco-Analyzer (RVA). Incorporation of yeast ${\beta}-glucan$ into wheat flour and starch significantly decreased peak and [mal viscosities, but slightly increased setback viscosity. The setback viscosity was considerably higher in starch/${\beta}-glucan$ suspension than in flour/${\beta}-glucan$ suspension. It was suggested that preparation of yeast ${\beta}-glucan$ into aqueous dispersion might affect pasting behaviors of wheat flour and starch.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.400-406
• /
• 2014

Apios (Apios americana Medikus) belongs to Leguminosae and is called 'American groundnut', 'Potato bean', and 'wild bean'. Apios is native to the Northern United States but is not widely distributed in Korea. In this study, cross-linked apios starch was prepared by reaction with epichlorohydrin, followed by characterization. FT-IR spectroscopy confirmed the degree of cross-linking of apios starch. X-ray diffraction patterns of native apios showed typical 'A' type as peaks at 15.1, 17.1, 17.9 and $23.2^{\circ}$, and cross-linking did not affect relative crystallinity and X-ray diffraction patterns of the starch. Scanning electron micrographs showed that apios starch granules were smooth with a globular shape, and there was little damage to starch granules after cross-linking. The lightness value of cross-linked apios starch was lower than that of native apios starch, whereas the redness value was not significantly different between cross-linked apios starch and native apios starch. Blue value showed that cross-linking of starch did not affect the iodine reaction of starch.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.557-561
• /
• 2007

Polypropylene (PP)/corn starch master batch (starch-MB) blends with different PP compositions of 40, 50, 60, and 80 wt% were prepared by melt compounding at $200^{\circ}C$, using lab scale Brabender mixer. The chemical structures and thermal properties of the PP/starch-MB blends were investigated by FT-IR, differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). The chemical structure was confirmed by the existence of hydroxy group. There was no district change in melting temperature and melting enthalpy, and TGA curve indicated a decrease in degradation temperature with starch-MB content. The porosity change of blend was measured by scanning electron microscope (SEM), the degree of porosity on the blend surface increased with the starch-MB content. The rheological properties indicated an increase in complex viscosity, shear thinning tendency and elasticity with the starch-MB concentration. These effects were confirmed by an oscillatory viscometer at $200^{\circ}C$. From these results, it is found that 40 wt% is the optimum starch-MB concentration. The fiber was fabricated from PP60/MB40 with 40 wt% starch-MB and the porosity and tensile properties were investigated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.770-774
• /
• 2002

The effect of mixing ratio of materials and their retort processing conditions on the physical properties and preference of oyster porridge were investigated. Rice gave adequate viscosity (about 800 cp) to the porridge as it was used 10～12% level and half of it was ground. Potato starch, waxy corn starch, and Perfectamyl AC showed small variation in viscosity unrelated to the temperature, that was a good condition for high quality porridge. Especially, waxy corn starch had a good property for retort porridge because its viscosity was maintained high during the processing and decreased to preferable one after processing. Purity CSC, modified starch gave gum-like texture and didn't cause water-separation much after freezing and thawing treatment of the porridge. Therefore, it was good for enhancing the physical property of the porridge as a co-additive of waxy corn starch when it was used at quarter level of waxy corn starch. Xanthan gum increased dispersibility of materials and it was useful for stabilizing physical quality of the porridge without affecting preference when it was used below 0.2% concentration. As a result, the optimal material-mixing ratio was determined as rice 10% (50% of it was ground), waxy corn starch 1.5%, Purity CSC 0.5%, xmthan gum 0.2%, salt 0.3%, and water 87.5%. Oyster's porridge, retort processed with this recipe, showed stable physical property after 6 month storage at room temperature.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.1
• /
• pp.126-133
• /
• 2015

Ohmic heating uses electric resistance heat which occurs equally and rapidly inside food when the electrical current is transmitted into. Prior to the study, we have researched the potato starch's thermal property changes during ohmic heating. Comparing with conventional heating, the gelatinization temperature and the range of potato starch treated by ohmic heating are increased and narrowed respectively. This result is appeared equally at wheat, corn and sweet potato starch. At this study, we treated potato, wheat, corn and sweet potato starch by ohmic/conventional method and observed change of external structure by microscope and internal structure by X-ray diffractometer. Conventional heated at $55^{\circ}C$ potato starch was not external structural changes. But ohmic heated potato starch is showed largely change. Some small size starch particle were broken or small particles are made of larger particle together or small particles caught up in the large particle. Changes in ohmic heated potato starch at $60^{\circ}C$ was greater. The inner matter came to an external particle burst inside and only the husk has been observed. The same change was observed in the rest of the starch. The change of internal structure of potato starch was measured using X-ray diffraction patterns. There was no significant difference between ohmic and conventional heating at $55^{\circ}C$. But almost every peak has disappeared ohmic at $60^{\circ}C$. Especially $5.4^{\circ}$ peak to represent the type B was completely gone. When viewed from the above results, external changes with change in the internal crystal structure of the starch particles were largely unknown to appear. In conclusion, during ohmic heating changes of starch due to the electric field with a change in temperature by the heating was found to have progressed at the same time.

• Korean journal of food and cookery science
• /
• v.10 no.2
• /
• pp.87-93
• /
• 1994

The sensory and instrumental characteristics of defatted and lipid-reintroduced kidney bean, mung bean and corn starch gels stored for 3 hrs and 24 hrs at room temperature were investigated. In sensory evaluation of starch gels, acceptability was highly correlated with hardness, bend property, cohesiveness and springiness. Mung bean starch gels showed sinigficantly highest value and followed by corn and kidney bean starch gels. Generally as for these factors, defatted starch gels were higher than untreated ones. The properties of defatted and lipid-reintroduced corn starch gels were similar to those of mung bean starch gels. In instrumental analysis, hardness was more important factor than any other ones. Hardness showed significantly higher value in the other of mung bean, corn and kidney bean starch gels, but it was highest in defatted starch gels among all treated gels. Hardness and springiness of defatted and lipid-reintroduced corn starch gels were similar to those of mung bean starch gels. Hardness of 24 hr stored starch gels increased more than that of 3 hr stored ones, but other textural factors did not change.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.1-8
• /
• 2013

High loading of printing and writing grades with fillers has many advantageous aspects in papermaking because it allows decreasing fiber use and reducing manufacturing cost. High loading technology, however, has some disadvantageous aspects as well. It decreases physical properties of papers, especially strength properties. The problem associated with high loading can be reduced by applying surface sizing starch solution onto paper surface. It is important to control the penetration of the surface sizing starch solution into paper web to obtain the desired property improvement. In this study, the effect of the addition of two polymers into starch solution on paper properties has been examined. PVOH and polyDADMAC were used as polymeric additives for surface sizing with oxidized starch. Viscosity of starch solutions and surface roughness of dried starch films on glass slides showed that some interactions between polymeric additives and oxidized starch have been occurred and the most extensive interaction with starch solution was obtained with high molecular weight polyDADMAC. Low molecular weight PVOH was most effective in improving folding endurance and internal bond strength. On the other hand, polymer addition showed no effect on surface strength of paper. This indicates that not the level of starch holdout but the bonding strength of starch itself has predominant influence on surface strength of paper.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.79-84
• /
• 2006

In order to improve filler-fiber bonding in paper, starch-filler composites were prepared by a starch-fatty acid complex formation method. These composites were used as a papermaking filler to improve the physical properties of the paper, filler retention and the sizing effect. The solubility of the starch-fatty acid complex in water at different temperatures was measured. The results indicated that the starch-fatty acid complexes have very low solubility in water below $70^{\circ}C$, which can be easily coated on clay surface to modify clay-fiber bonding ability. The clay-starch composite filled handsheets showed that paper strength could increase more than $100{\sim}200%$ compared to untreated clay. It was found that ZDT of the handsheet decreased as the clay content increased when unmodified clay was used, but it increased when the starch-fatty acid composite modified filler was used. It was also found that the presence of fatty acide in the complex increased the water-repellant property of the handsheet, which can be used to aid in sizing during papermaking. Filler distribution and bonding characteristics between the composite and fiber were investigated using Scanning Electron Microscopy(SEM).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.4
• /
• pp.45-52
• /
• 1997

This study was carried out to investigate the adsorption characteristics of cationic starches onto BKP, BCTMP and talc. Concentration of the unadsorbed cationic starch contained in the supernatant of the pulp or talc slurries was determined using a spectoscopy method and the adsorption isotherm of cationc starch was constructed. When the equilibrium concentration of the cationic starch was low, almost complete adsorption of the starch onto BKP and BCTMP was observed. This indicates that electrostatic attraction is the main driving force for the adsorption of cationc starches onto pulps. BCTMP adsorbed greater amount of cationic starches than BKP since it contained more anionc functional groups on its surface. The adsorption amount of the cationic starch increased as the cationicity of the starches decreased. Surface charge density of the pulp and starch adsorption increased as the pH of the pulp slurry increased. Adsorption amount of the cationic starch onto talc was lower than that onto the pulp due to its low charge density and hydrophobic surface property.