• 펄프종이기술
• /
• 제45권4호
• /
• pp.9-15
• /
• 2013

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.21-26
• /
• 2013

The effect of esterified starch as surface sizing agent for inkjet printing paper has been evaluated and compared with oxidized starch. Also the influence of various additives including cationic poly-DADMAC, stearic acrylic copolymer, calcium chloride, and GCC was examined. Results showed that starch ester gave higher ink density than oxidized starch. Addition of poly-DADMAC improved water fastness. In general, low molecular weight poly-DADMAC performed better than high molecular weight one, and it was attributed to the fact that it gave more uniform film forming characteristics in surface sizing. Use of styrene acrylic acid copolymer increased hydrophobicity of the paper surface, but it did not increase the ink density. Use of GCC and calcium chloride had only marginal effect on printing quality.

• Food Quality and Culture
• /
• 제3권2호
• /
• pp.53-58
• /
• 2009

This study was conducted to investigate the quality characteristics of frozen stored mungbean starch gels added with sucrose fatty acid ester (SE). The study showed a delay of gelatinization of mungbean starch by SE addition through the measurements conducted by using Rapid Visco Analyzer (RVA) and Differential Scanning Calorimeter (DSC). In the color of SE added frozen stored gels, lightness (L) and yellowness (b) values were increased compared to those of values measured from freshly prepared gel, whereas redness (a) value was decreased. The addition of 1% SE on mungbean starch gel prevented the color change during frozen storage. Rupture stress and rupture energy of frozen stored gel was higher than those of freshly prepared gel, whereas rupture strain of frozen stored gel was lower than that of freshly prepared gel. The addition of 1% SE on mungbean starch gel prevented the change of rupture characteristics during frozen storage. Texture profile analysis(TPA) characteristics revealed a significant change of the gel texture during frozen storage by showing an increase of hardness of the frozen stored gels compared to the freshly prepared gels with newly discovered fracturability, which resulted to show a large difference of gel texture by showing the disappearance of adhesiveness and large reduction of cohesivenes. The addition of 1% SE on mungbean starch gel prevented the change of TPA characteristics during frozen storage. Scanning electron micrographs showed that network structure of frozen stored gel was more rough than that of freshly prepared gel, and the addition of 1% SE on mungbean starch gel could suppress the breakdown of network structure. Thus the addition of 1.0% SE on mungbean starch gel was appropriate method for remaining gel characteristics during frozen storage.

• 한국식품과학회지
• /
• 제23권1호
• /
• pp.116-121
• /
• 1991

밀전분의 호화와 노화에 수분함량과 sodium stearoyl-2-lactylate(SSL), sucrose ester(SE), monoglyceride(Dimodan) 같은 surfactant의 효과를 differential scanning calorimetry를 이용하여 조사하였다. 전분의 호화양상은 수분함량에 따라 다르고 수분함량이 30% 이하이면 호화가 일어나지 못하였다. 호화개시 온도는 $59{\sim}60^{\circ}C$이었으며, 노화개시 온도는 $50{\sim}55^{\circ}C$이었다. 노화된 전분의 엔탈피는 수분함량이 $40{\sim}50%$일 때 가장 컸다. Surfactant를 첨가하면 호화온도는 약간 높아졌고, amylose-lipid complex의 엔탈피는 증가하였다. Surfactant를 첨가한 전분은 저장에 따라 노화가 늦게 진행되었으나 amylose-lipid complex의 변화는 거의 없었다.

• 대한가정학회지
• /
• 제42권2호
• /
• pp.213-227
• /
• 2004

This study was attempted to investigate the sensory and textural characteristics of mungbean starch gels with soy bean oil and sucrose fatty acid ester(SE) addition during room temperature storage. Freshly prepared mungbean starch gels, with and without soy bean oil and SE, were stored at 25$^{\circ}C$ for 24, 48 and 72 hours. The color value, syneresis, texture and sensory properties of the gels were measured. The lightness(L) of the gels with soy bean oil and without additives was similar whereas that with SE was lower than that without additives. Syneresis of the gels with soy bean oil and SE was lower than that without additives. Rupture stress, rupture strain and rupture energy of the freshly prepared gel with 2∼4% soy bean oil were increased, but there were no differences in rupture properties between the gel with soy bean oil and that without additives. Rupture stress, rupture stain and rupture energy of all the gels with SE were decreased. Addition of soy bean oil to the gel did not change the texture profile of the gel, whereas hardness, springiness and chewiness of the gel with SE were decreased. In sensory evaluation, the acceptability of freshly prepared gel with soy bean oil was similar to that without additives, whereas that of the gel with 2% soy bean oil stored for 24 hours was higher than that without additives. The acceptability of the gel with SE was decreased significantly.

• 한국식품조리과학회지
• /
• 제8권3호
• /
• pp.255-263
• /
• 1992

Pasting characteristics and amylose-surfactant complex forming ability of sweet potato starch were investigated after defatting and the addition of surfactants, such as SSL (sodium steamyl-2-lactylate) Dimodan (mono/di glyceride) and SE (sucrose ester) with different concentrations. All starch granules were smooth and round, there were no damages to starch granules after defatting and surfactant addition. amylose content of surfactant added stach decreased and me order of decrease was SSL, SE and Dimodan. The cornplex forming ability of SE added starch increased according to increasing HLB value. As surfactants concentration increased, amylose complex formig ability increased. In case of gelatinization patterns by amylograph, the initial pasting temperature of surfactant added starches was higher than mat of untreated or defatted starches, but viscosity at each temperature were all decreased. Soluble carbohydrate and leached amylose of starches increased at increasing temperature, those of surfactant added starches decreased at each temperature in the order of SSL, SE and Dimodan.

• 한국식품조리과학회지
• /
• 제12권2호
• /
• pp.193-199
• /
• 1996

첨가물질이 무처리 그리고 탈지옥수수와 녹두전분겔의 텍스쳐 특성에 미치는 영향을 알아 보기 위하여 실온에서 24시간과 72시간 저장하면서 관능적 기계적 특성을 조사하였다. 슈크로오스 지방산 에스테르, 셀룰로오스 유도체와 식용유를 전분량에 대해 0.5%첨가한 전분겔의 종합적인 맛은 24시간 저장한 전분겔의 경우에 응집성, 휘어짐성에서 높은 정의 상관관계를 보였고 72시간 저장한 전분겔에서는 탄성 , 응집성 ,색깔, 부드러움성 , 휘어짐성 , 견고성 , 투명도에서 정의상관관계를 보였다. 첨가물질의 유무에 관계없이 탈지에 의한 옥수수전분 겔의 물성적 특성이 크게 증가되었으며 첨가물질의 물성적 특성에 대한 영향은 모든 전분겔에서 낮게 나타났다. 종합적인 맛은 첨가물질을 넣은 전분겔이 다소 낮았고 24시간 저장한 전분겔은 응집성에서 72시간 저장한 전분겔은 탄성에서 가장 높은 상관관계를 보였다. 기계적 검사에 의한 텍스쳐 특성치도 관능검사 결과와 비슷한 경향을 보여 첨가물질의 종류에 따른 유의적인 차이는 보이지 않았다.

• Applied Biological Chemistry
• /
• 제37권6호
• /
• pp.463-471
• /
• 1994

고구마 생전분에 0.5% 농도의 계면활성제, SSL(sodium stearoyl-2-lactylate), Dimodan(mono/diglyceride), SE 1670(sucrose fatty acid ester 1670)을 첨가하여 이들 전분의 이화학적 성질과 호화 및 노화특성을 측정하였다. 고구마 전분 입자의 모양과 결정형은 계면활성제 첨가 후에도 변화되지 않았다. 계면활성제 첨가에 의해 총지방 함량이 증가하였으며 아밀로오스 함량은 감소하였고 그 정도는 SE1670>SSL>Dimodan순이었다. $80^{\circ}C$에서의 팽윤력과 용해도는 무처리 전분에 비해 계면활성제 첨가 전분은 감소하였다. 아밀로그래프에 의한 호화개시온도는 무처리 전분이 $72.5^{\circ}C$였고 계면활성제 첨가시 변화는 없었으며 Dimodan과 SE1670 첨가 전분의 경우 최고 점도가 나타났다. 시차주사열량기에 의한 호화 양상은 무처리 전분의 피크 온도와 엔탈피는 각각 $73.7^{\circ}C$, 1.3 cal/g이며, 계면활성제 첨가 전분의 호화 피크 온도는 증가하였으나 엔탈피는 감소하였다. 알칼리 호화 양상은 초기에 급격한 점도의 증가를 보이다 완만해졌으며 계면활성제 첨가 전분의 점도는 무처리 전분에 비해 감소하였으며 계면활성제 종류에 따라 차이를 보였다. ${\alpha}$-아밀라아제-요오드법에 의한 노화도는 무처리 전분에 비해 SSL과 SE1670 첨가한 전분의 노화도는 감소하였다. 시차주사열량기에 의한 노화도는 계면활성제 첨가 전분은 무처리 전분에 비해 모두 감소하였다.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1230-1236
• /
• 2009

Optimum conditions for the freeze-thaw stability (FTS) of mung bean starch (MBS) paste as a main ingredient in omija-eui were investigated. For the optimization of the paste preparation condition, the FTS of MBS prepared by boiling in a shaking water bath (BMSW) or by pressure-cooking in an autoclave (PCMA) were analyzed using a response surface methodology (RSM). In addition, the effects of various additives such as gums, sugars, and emulsifier were evaluated on the FTS of MBS paste prepared under optimal conditions. The predicted maximal FTS of MBS paste prepared by the PCMA method (73%) was higher than that of the paste prepared by the BMSW method (36%). In case of additives, gellan gum and sodium alginate effectively prevented the syneresis of MBS paste in the BMSW method and in the PCMA method, respectively. The use of a fructose fatty acid ester as an emulsifier decreased syneresis in a dose-dependent, while the addition of sugars accelerated syneresis. Consequently, MBS paste for omija-eui preparation may be efficiently prepared by adding sodium alginate and fructose fatty acid ester under the optimal conditions of 4.3% MBS content, $121^{\circ}C$ heating temperature, and $89^{\circ}C$ cooling temperature by pressure-cooking in an autoclave.

• 한국식품조리과학회지
• /
• 제13권2호
• /
• pp.185-191
• /
• 1997

The effects of five hydrated emulsifiers with or without specified proteins (flour, egg) and/or polydextrose on the reduced-calorie cake as baked product model systems were compared. The small molecule amphiphiles (SMA) used were monoglycerides (MG), sorbitan monostearate (SMS), polysorbate (PS) 60, sucrose ester (SE) F7O, and SE Fl60. All flour batters with each emulsifier and supplements had similar low foam drainages (0.00∼1.03$m\ell$) indicating those systems were fairly stable in the presence of flour protein. The cake batter using starch instead of flour without egg and polydextrose and with some emulsifiers had relatively large amount of drainages (4.20∼5.87$m\ell$). When the egg and polydextrose were added to the blank cake batters using starch, foam drainages tended to show relatively low scores (0.13∼1.48$m\ell$) indicating the cake batter dispersion system is stabilized. Starch cakes made with SE F70 without egg or polydextrose(blank) unexpectedly had high volume index of 199.