• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.423-428
• /
• 1999

Potato starches were hydroxypropylated with 2.5, 5.0, 7.5, and 10.0% propylene oxide(PO) to improve mechanical properties of starch polyethylene film. Starch polyethylene cast films were prepared that contained 5% or 10% of the hydroxypropylated potato starch. Mechanical properties of these films were measured and compared to those of the films containing native potato starch. DS(degree of substitution) increased proportionally as propylene oxide concentration increased. Relative crystallinity in X ray diffraction patterns was decreased and starch granule observed by scanning electron micro scopy was destroyed by severe hydroxypropylation. In color properties of films, b value was not significantly different in the films but 5% starch polyethylene films with 2.5 PO starch showed the lowest L and a value. Tensile strength and strain energy of the films except the film containing 10.0 PO starch were higher than those of the containing native starch.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.412-417
• /
• 1994

The biodegradable characteristics of starch-filled polyethylene film by fungi were investigated. Aspergillus niger showed the highest cell growth among five species of fungi used in the experiment. Higher starch content gave the higher growth rate of A. niger; however, the kind of film or cutting direction did not give any effects on the cell growth. The use of vinyl trimethoxysilane for the stronger binding of starch and polyethylene did not inhibit the cell growth. When the starch content was higher than 10%, the elongation of the film decreased significantly after the growth of microorganism in the case of transverse direction samples.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1298-1305
• /
• 2000

Potato starches were crosslinked with 0.1, 0.5, 1.0, and 2.0% epichlorohydrin. Starch/polyethylene(PE) cast films were prepared to contain 5% of the crosslinked potato starch. Mechanical properties and degradability of these films were measured and compared to those of the films containing native potato starch. Mechanical strength of the films containing crosslinked potato starch was higher than that of the film containing native starch. Thermal degradability measured by a FT-IR and an Instron showed that crosslinked starch/PE films degraded faster than native starch/PE films. Biodegradability of the starch/PE films was accelerated by the addition of crosslinked starch to the PE films.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.86-91
• /
• 1996

Optimal reaction condition for the starch hydrolysis by ${\alpha}$-amylase was determined and the sugar produced under the optimal condition was measured for estimating the biodegradation of strach-filled polyethylene film. Optimal ranges of temperature and pH were 70~$80^{\circ}C$ and 6.3~7.3, respectively. The 100 units of ${\alpha}$-amylase per mg starch were enough for the enzyme reaction. Reaction with polyethylene film containing 5%, 10%, 15% and 20% starch in the above condition showed that the sugar produced was proportional to the starch content in film. This relationship provides a calibration curve for determining the starch content of search-filled polyethylene film. The average amount of hydrolyzed starch was about 40% of total starch in film. The rest of the starch is considered to be still dispersed in the film and not to be attacked by ${\alpha}$-amylase. In this experiment, we could obtain the higher biodegradability through the $\alpha$-amylase reaction in the above optimal condition than the reported one which had been Improved by adding surfactant.

• Preventive Nutrition and Food Science
• /
• v.6 no.2
• /
• pp.112-116
• /
• 2001

Oxidized potato starch/polyethylene (PE) cast films were prepared with different percentages of linear low density PE (LLDPE), oxidized potato starch and prooxidant. For the determination of biodegradability of the films, lignocellulose-degrading Streptomyces viridosporus T7A (ATCC 39115) was used. Films were chemically disinfected and incubated with S. viridosporus by shaking at 100 rpm at 37$^{\circ}C$ for eight weeks. Hydroxyl indices of the films by Fourier-Transform Infrared Spectroscopy, mechanical Properties of the films by Instron and film morphology by scanning electron microscope (SEM) were measured. The hydroxyl index of the film containing the oxidized potato starch incubated with S. viridosporus T7A was higher than that of the corresponding control. All the films containing 5% and 10% oxidized starch showed a decrease of tensile strength on the films after incubation when the corresponding uninoculated film was compared. In the oxidized starch/PE film incubated with S. viridosporus T7A, partial destruction of starch and PE was examined by SEM.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.178-187
• /
• 1993

Degradation of the starch-polyethylene composite film by an activated sludge treatment and a soil burial test was examined. The treated films had deformed structures which were resulted from the removal of starch during the treatments. The added auto-oxidant caused the degradation of the polyethylene matrices and the crosslinking reactions after the oxidation of polyethylene chains as well. As a result of soil burial test, the degradation reaction of the composite film containing corn oil as an auto-oxidant was, however, prevalent : number- and weight-average molecular weight of polyethylene decreased, while the molecular weight distribution increased.

• Preventive Nutrition and Food Science
• /
• v.3 no.1
• /
• pp.27-35
• /
• 1998

Starch-polyethylene films containing high molecular weight(NW) oxidized-polyethylene and prooxidant were prepared , and thermal -and bio-degradability of the films were determined. Increased levels of starch resulted in a corresponding reduction in mechanical strength of the films. However, the addition of high MW oxidized-polyethylene did not significantly reduce the percent elongation of the films. Thefilms containing high MW oxidized-polyethylene andproosicant were degreaded faster than those containing no aadditive during the heat treatment. The films lost their measureable mechanical properties when their weight-average MW(Mw) fell below 50,000. Biodegradability of the films was determined by a pure culture assay with either Streptomyces badius 252.S. setonii 75Vi2 or S. viridosporous T7A, and by an extracellulr enzyme assay using S. setonii 75vi2. The results from pure culture assay indicated that biomass accumulation on the film surface inhibited chemical and biological degradation of the films. The extracellular enzyme assay demonstrated decrease of percent elongation and increase of carbonyl index of the films. Therefore, extracellular enzyme assay could be used as a good method to evaluate biodegradability of the films.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.68-72
• /
• 2005

Moisture sorption characteristics of edible composite films were determined and compared against moisture barrier properties. Edible composite films were Z1 (zein film with polyethylene glycol(PEG) and glycerol), Z2 (zein film with oleic acid), ZA1 (zein-coated high amylose corn starch film with PEG and glycerol), and ZA2 (zein-coated high amylose corn starch film with oleic acid). Z2 film showed the lowest equilibrium moisture content (EMC), monolayer value ($W_m$), water vapor permeability (WVP), and water solubility (WS). Surface structure of Z2 was relatively denser and finer than that of other edible films. GAB $W_m$ and C values decreased, while K values increased with increasing temperature. Correlation coefficients of WS:EMC and WVP:EMC at Aw 0.75 were higher than those of WS: $W_m$ and WVP: $W_m$, respectively. EMC values at Aw 0.75 appeared useful for evaluating or predicting moisture barrier properties of edible films.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.45-52
• /
• 1984

Changes of chemical componts and populations of total bacteria and lactic acid bacteria were examined during a month-long storage of sweet potatoes crushed and sealed up with polyethylene film at $7-8^{\circ}C$. 1. Changes of starch, total protein, volatile acid and ammonia-nitrogen contents were li 2. In a three days, pH down and increase of non-volatile acid content were notable, populations of total bacteria and lactic acid bacteria were maximum. 3. Vitamic C and soluble sugar contents tended to be reduced during the storage and the leftover were 75-85% and 41-45% respectively. 4. ${\beta}$-Amylase activity decreased gradually and vanished 15-30days. 5. Variations of chemical compontents of the samples inoculated lactic acid bacteria were larger than non- treated to some extent. 6. As above results, mainly homo lactic acid fermentation was done in this storage condition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.3
• /
• pp.191-197
• /
• 1988

Sorption properties of corn starch(CS) and Soy protein isolates(SPI) in plastic films packaging were investigates for binary system. The mixture were sealed in plastic films of low density polyethylene(LDPE), oriented polypropylene(OPP) and LDPE/OPP coated film and packaging effect on the changes of moisture sorption during storage at $40^{\circ}C$ were studied. The following results were obtained. The water vapor permeability of material films was $32.6g/m^2/24hrs(below\;g)$ for 0.02mm LDPE film, 14.01g for 0.04mm LDPE film, 7.30g for 0.02mm OPP film, 3.37g for 0.04mm OPP film and 4.869 for 0.02mm LDPE/0.02 mm OPP confine film at $40^{\cire}C$ 90%RH, therefore the OPP film was more effective than LDPE film on the resistance of relative humidity. And the OPP film packaging sealed mixture of food samples was also more elective then LDPE film, having same thickness for increase of water vapor permeability during storage at $40^{\cire}C$. A general increase in sorption rate was found more in SPI than CS in the packaged mixtures.