• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.115.1-115.1
• /
• 2007

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.51-57
• /
• 1957

Hydroquinone-formaldehyde resin prepared from hydroquinone, formaldehyde and hydrochloric acid as a catalyst was shown to be oxidized with ferric chloride solution and regenerated by stannous chloride solution. The influence of various conditions of preparation on the capacity of oxidation was studied. Results show that the concentration of a solution of hydroquinone has not any effects below 14 parts of water to 1 part of hydroquinone, by the after-heat-treatment for 5-6 hours at 100-120 deg. C. the capacity of oxidation is exhibited a maximum, and decreased as the mole ratio of hydroquinone to formaldehyde increase. The optimum conditions for the preparation of this resin are as follows: hydroquinone 1 part to distilled water 10 parts, mole ratio of formaldehyde 1.2 to hydroquinone 1, and 5 hours of after-heat-treatment at 120 deg. C. The maximum capacity under the above conditions is 13.99 meq/g-ersin.

• Korean Journal of Materials Research
• /
• v.21 no.1
• /
• pp.21-27
• /
• 2011

A nano-porous structure of tin oxide was prepared using an anodic oxidation process and the sample's electrochemical properties were evaluated for application as an anode in a rechargeable lithium battery. Microscopic images of the as-anodized sample indicated that it has a nano-porous structure with an average pore size of several tens of nanometers and a pore wall size of about 10 nanometers; the structural/compositional analyses proved that it is amorphous stannous oxide (SnO). The powder form of the as-anodized specimen was satisfactorily lithiated and delithiated as the anode in a lithium battery. Furthermore, it showed high initial reversible capacity and superior rate performance when compared to previous fabrication attempts. Its excellent electrode performance is probably due to the effective alleviation of strain arising from a cycling-induced large volume change and the short diffusion length of lithium through the nano-structured sample. To further enhance the rate performance, the attempt was made to create porous tin oxide film on copper substrate by anodizing the electrodeposited tin. Nevertheless, the full anodization of tin film on a copper substrate led to the mechanical disintegration of the anodic tin oxide, due most likely to the vigorous gas evolution and the surface oxidation of copper substrate. The adhesion of anodic tin oxide to the substrate, together with the initial reversibility and cycling stability, needs to be further improved for its application to high-power electrode materials in lithium batteries.