• 벤처창업연구
• /
• 제15권3호
• /
• pp.103-119
• /
• 2020

본 연구는 소기업 CEO를 대상으로 기업의 성과에 영향을 미치는 창업기업가의 내적역량인 역경지수, 기업가지향성, 고객지향성간의 관계를 분석함으로서 이론적, 실무적 시사점을 도출하고자 하였다. 기존의 국내 선행연구들처럼 내적역량을 기업성과에 대한 단일 차원의 함수관계로 분석하는데서 벗어나서, 창업기업가의 내적역량들 사이의 관계를 설명하려고 하였다. 역경지수를 독립변수, 기업가지향성을 매개변수, 고객지향성을 종속변수로 설정하여 실증분석을 하였다. 분석결과는 첫째, 역경지수의 하위요소인 통제력과 주인의식은 기업가지향성과 고객지향성에 정(+)의 영향을 미치는 것으로 나타났다. 둘째, 기업가지향성은 고객지향성에 정(+)의 영향을 미치는 것으로 나타났다. 셋째, 역경지수의 주인의식만이 기업가지향성의 매개를 통해 고객지향성에 정(+)의 영향을 미치는 것으로 나타났다. 즉, 창업가의 주인의식은 기업가지향성을 통해 고객지향성에 영향을 미치는 것으로 밝혀졌다. 한편, 역경지수의 하위요소인 지속성은 기업가지향성과 고객지향성에 유의한 영향을 미치지 않는 것으로 나타났다. 이는 급변하는 뉴노멀 시대에서 창업가의 지속성은 더 이상 기업가지향성과 고객지향성에 큰 영향을 미치지 못하는 것을 의미한다. 본 연구는 창업기업가의 역량 중에서 우선 개발해야하는 역량이 무엇이고 함께 개발되어야하는 성향이 무엇인지에 대한 시사점을 준다. 나아가 정책적으로 창업지원 프로그램 설계 및 투자자의 투자기준의 가이드라인 설계 시 도움이 될 수 있을 것이다.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1253-1264
• /
• 2004

The purpose of this study is to develop clothing shopping orientation[CSO] scale reflecting the conceptual structure of CSO. For this purpose, a questionnaire composed of comprehensive 85 CSO items was developed through 2-step preliminary tests. Data was collected from two samples. One sample(n=559) was for scale development and the other sample(n=235) was for cross validity test. Descriptive analysis, correlation analysis, exploratory factor analysis, regression analysis, ANOVA, and confirmatory factor analysis were used for data analysis. For each lower-dimension within the CSO conceptual structure model, 1-2 items were selected based on the quantitative and the qualitative standards. As a result, a CSO scale composed of 31 items was developed, and reliability, construct validity, cross validity, convergent validity, discriminant validity, and criterion validity of the scale were verified. This study has significance in offering the standardized scale to both the academic and the practical fields.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.236-239
• /
• 2000

Both the X-ray diffraction data of the normal direction in the sample orientation and the pole figure data of three reflections, (111), (200) and (220), were used to do the Rietveld refinement for the copper sheet prepared by a cold rolling process. The agreement between calculated and observed patterns was not satisfactory, which was attributed to the preferred orientation effect of the copper sheet. The Rietveld refinement for the copper sheet could be done successfully by applying the pole density of each reflection obtained from the corresponding inverse pole figure to the X-ray diffraction data of the normal direction. The R-weighted pattern, $R_{wp}$ was 12.99% and the goodness-of-fit indicator, S, was 3.68.

• 대한가정학회지
• /
• 제39권3호
• /
• pp.1-10
• /
• 2001

The Purpose of this study was to investigate the relationship between materialism and clothing buying behavior (clothing shopping orientation, clothing selection standards, use of information sources, store selection standards, purchase and purchase intention of imported clothing). The data were obtained from questionnaires completed by 400 women in the Taegu area whose age was 20 years and older. The SPSS/PC$^{+}$ package was used for data analysis which included a test of reliability, frequency, percentage, factor analysis, t-test, and x$^2$ test. There were significant differences in clothing buying behavior between groups who had a higher tendency and a lower tendency toward materialism. In other words, those who had a higher tendency toward materialism enjoyed their shopping and pursued the world-known brands, imported brands, the latest fashions, and conspicious consumption more than those who had a lower tendency of materialism. The former put a greater focus on the latest fashion styles, brand image, and design then the latter when the\ulcorner bought clothing. Those who had a higher tendency toward materialism utilized more information sources than those who had a lower tendency. The former made purchases from the stores where they stock famous world-known brands and well-advertised stores, and had a greater purchase intention of imported clothing than the latter. In the purchase of imported clothing there was no significant difference between two groups.s.

• 비파괴검사학회지
• /
• 제17권4호
• /
• pp.270-277
• /
• 1997

소성이방성은 판재의 가공성을 결정하는 중요한 인자로써 주로 기계적인 인장시험에 의해 측정되고 평가되어 왔다. 압연 방향에 대하여 상대적인 방향으로 진행하는 초음파의 속도로부터 집합조직의 결정분포함수를 구할 수 있으며, 결정분포함수의 계수인 결정방위계수는 소성이방성의 평균값들과 상관 관계를 갖는다. 본 실험에서는 초음파 속도로 구한 결정방위계수와 압연강판의 소성이방성을 비교하여 서로의 상관 관계를 구하였으며, 측정결과 average normal anisotropy, $\bar{\gamma}$는 ${\pm}0.082$, average planar anisotropy, ${\Delta}r$는 ${\pm}0.096$의 편차 내에서 예측 가능하였다. 초음파 속도 측정에는 공진주파수측정법이 적용되었고, 초음파의 송수신에는 EMAT가 이용되었다.

• 한국CDE학회논문집
• /
• 제16권2호
• /
• pp.83-91
• /
• 2011

There are many researches to make low-energy building. Lots of them focus on facility systems and insulation performance of building materials. However, not only systematic solutions but also approaches in early design stages are important to reduce energy consumption. Using BIM(Building Information Modelling) is considered as an effective and efficient way to simulate building energy and decide alternatives than traditional energy simulation because BIM based energy simulation makes to reduce much time for energy modeling. This study focuses on development of optimized geometry for super tall office buildings in Seoul, Korea. Specifically, length to width ratio and building orientation are main topics of this study because these two topics are the most basic and preceding factors deciding mass design. In this study, Revit MEP 2011 and Ecotect Analysis 2011 are used to make case models and calculate energy load in early design stages. Energy properties of material abide by Korean Standards for Energy Conservation in Building, Korean Guideline for Energy Conservation in Public Office and ASHRAE Standard in USA. This study presents best length to width ratio of plan and optimized orientation by evaluating the case models. Furthermore, this study suggests what should be considered for each case to decrease energy load.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.354-358
• /
• 2000

The SnO$_2$film was deposited on a corning glass 1737 substrate by plasma enhanced chemical vapor deposition using a gas mixture of SnCl$_4$, $O_2$, and Ar. The film thickness was measured using $\alpha$-step and was about 9400$\AA$. The conventional X-ray diffractometry and pole figure attachment were used to refine the crystal structure of SnO$_2$ thin film. Six pole figures, (200), (211), (310), (301), (321), and (411), were measured with CoK$_\alpha$ radiation in reflection geometry. The X-ray diffraction data were measured at room temperature using CuK$_\alpha$ radiation with graphite monochromator. The agreement between calculated and observed patterns for the normal direction of SnO$_2$ thin film was not satisfactory due to the severely preferred orientation effect. The Rietveld refinement of heavily textured SnO$_2$ thin film was successfully achieved by adopting the pole density distribution of each reflection obtained from the inverse pole figure as a correction factor for the preferred orientation effect. The R-weighted pattern, R$_wp$, was 15.30%.

• 한국자기공명학회논문지
• /
• 제22권2호
• /
• pp.40-45
• /
• 2018

We report Optically-Detected Magnetic Resonance (ODMR) study on Nitrogen-Vacancy (NV) centers in diamond. The experiment can easily be conducted with basic optics and microwave components. A diamond crystal having a high-density NV center is suitable for the ODMR study. The magnetic field dependence of ODMR spectrum allowed us to determine the orientation of the diamond crystal. In addition, we measured the variation of the ODMR spectrum as a function of the excitation laser power. Thermal heating induced by optical absorption caused the monotonic decrease of zero field splitting. The contrast of the ODMR peak, however, increased and, then, began to decrease, indicating the optimal laser power for recording the ODMR spectrum.

• Bulletin of the Korean Chemical Society
• /
• 제11권4호
• /
• pp.286-290
• /
• 1990

The surface enhanced Raman scatterings of Zn(Ⅱ) tetrakis (4-N-methyl pyridyl) porphyrins were studied in silver sol. Zn(Ⅱ) tetrakis (4-N-methyl pyridyl) porphyrin was found to be adsorbed on silver surface via flat-on geometry with some inhomogeneous distribution in the orientation of pyridyl groups. Both the selective enhancement of Raman modes depending on the mode character and the theoretical arguments of SERS are utilized to support the above conclusion. The surface induced substitution reaction of Mn(Ⅲ) tetrakis (4-N-methyl pyridyl) porphyrin chloride to Ag(Ⅱ) tetrakis (4-N-methyl pyridyl) porphyrin was detected via surface enhanced Raman spectrum.

• Composites Research
• /
• 제32권6호
• /
• pp.403-407
• /
• 2019

장섬유강화 복합재료는 연속섬유강화 복합재료 대비 가격 경쟁력 및 성형 자유도가 높은 장점을 가지고 있다. 반면에 중간재를 제조하는 과정에서 무작위로 분산되는 특성으로 균일한 배향성을 확보하는데 어려움이 있다. 이에 본 연구에서는 LFPS(Long Fiber Prepreg Sheet) 소재의 재현성 검증을 위하여, 섬유의 배향 각도를 측정하고 이를 기반으로 기계적 물성치와의 상관관계를 분석하였다. 배향특성 분석을 위하여 와류측정방식을 사용하였으며, ASTM 기준에 준하여 LFPS 소재의 인장 및 압축 시험평가를 수행하였다. 추가적으로, 탄성강성 예측이론인 ROM(Rule of Mixture)을 활용하여 LFPS 소재의 시험결과와 이론치를 검증하였다. 이러한 결과를 통해 비연속섬유강화 복합재료의 섬유 배향특성이 기계적 특성에 미치는 영향을 확인하였다.