• Korean journal of food and cookery science
• /
• v.14 no.4
• /
• pp.367-374
• /
• 1998

The purpose of this study was to evaluate the microbiological quality of, and to assure the hygienic safety of, the kimbap production in the university foodservice facilities in accordance with the HACCP (Hazard Analysis Critical Control Point) Program. The time-temperature relationship and the microbiological quality (specifically, total plate count and coliform bacteria count) were assessed to find the critical control point (CCP) during each of the production phases. The average of the daily longest duration time of the kimbap at the facilities was 23.4 hours in summer, while 29.6 hours in winter. In the purchasing phase of the raw materials, the microbiological quality of laver, fish paste, carrot and cucumber in summer was not at an acceptable level according to the standard set by the Natick research center, especially the number of TPC and the coliform level of laver was higher than the threshold level. In the refrigerator storage phase, the temperature of the carrot was 7.4$^{\circ}C$. This temperature is far exceeding the standard so that the microbiological counts was increased by the 2 log cycle during the average storage time of 17 hours or more. In the preparation phase, the temperature of the blanching is too low compared to the standard. In the holding phase before serving, its time-temperature relationship was out of the FDA food code standard both in winter and summer. In the sewing phase, the number of microbiological count was higher than the threshold level in summer while that in winter was up to standard. According to the Harrigan and McCance standard, the number of microbiological count of the utensils was higher than the threshold level in summer while that in winter was up to standard.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.2
• /
• pp.167-172
• /
• 2014

The purpose of this study was to investigate walking standard time and joint powers of the lower extremities on the changes of illuminations in the elderly women. Ten older women ($70.90{\pm}3.28$ years, $154.70{\pm}3.47$ cm, $53.80{\pm}5.39$ kg) with normal vision and no gait disabilities participated in this study. All the experiments were performed on a level walkway from low to high lighting (six conditions). A 3-dimensional motion capturing system, force-plate, and EMG were used to acquire and analyze walking motion, force, and muscle activity data; the sampling frequency was 100 Hz, 1000 Hz and 1000 Hz respectively. To test the differences on walking standard time and joint powers of the lower extremities between the six lighting conditions, one-way repeated ANOVAs were evaluated. The following results were drawn: First, mean standard time was about 1.3 sec/stride, and velocities were smaller with lighting increasing except 100 Lx. Second, the joint power patterns of ankle and knee were not consistent, but only hip joint power was a greatest in 6 Lx and a smallest in 400 Lx. Third, standard times(100 Lx<300 Lx, 400 Lx) were statistically significant, and hip joint max powers (100 Lx>others) were also statistically significant. But ankle and knee joint max power were not statistically significant. These results showed that standard times from low to high lighting were not consistent, and hip joint of 100 Lx has a greatest rotational torque. We suggested that gait strategies of them as to changing illuminations were not consistent and findings may represent a lack of adaptability in the elderly women.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.459-466
• /
• 2017

Objective: This study examined two traffic signals with a countdown indicator in terms of driver's reaction time and subjective satisfaction score and their performance was compared with a standard traffic signal in driving simulation. Background: Dilemma zone is created when a traffic light changes at intersections. It often pushes drivers to rush in urgent and premature decision making whether to go or stop and thus induces unnecessary mental load among drivers, which may lead to sudden conflicts with following vehicles at intersections. Method: Forty college students (male: 20, female: 20) participated in this driving simulation study. Three traffic signals were employed: (1) standard traffic signal; (2) countdown-separated signal; and (3) countdown-overlaid signal. The countdown-separated and countdown-overlaid signals were designed to inform drivers of the remaining time of a green light before tuning to an amber light. Reaction times (sec) and satisfaction scores (7-point scale) for the two signals with a countdown indicator were compared with those for the standard traffic signal. Results: Reaction times of the countdown-separated (0.49 sec) and countdown-overlaid (0.43 sec) signals were significantly shorter than that of the standard signal (0.67 sec). Satisfaction scores of the countdown-separated (5.3 point) and countdown-overlaid (5.6 point) signals were greater than that of the standard signal (3.8 point). Lastly, the countdown-overlaid signal showed better performance than the countdown-separated signal, but their differences in reaction time (0.06 sec) and satisfaction score (0.3 point) were small. Conclusion: Traffic signals with a countdown indicator can improve drivers' reaction time and satisfaction score than the standard traffic signal. Application: Traffic signals with a countdown indicator will be useful for reducing the length of dilemma zone at intersections, by allowing drivers to predict the remaining time of a green light.

• 한국사회정책
• /
• v.23 no.3
• /
• pp.17-47
• /
• 2016

This paper aims to analysis working-time of Korea focusing on "the difference and the distribution" by a stratum. Classifying working-time into four categories including marginal part-time, part-time work, standard-time work and long-time working, it compares the relative distribution by income quintile. The outcome is as following : 20% of low-ranking income quintile are (marginal) part-time working, 60% from income quintile 2 to 4 are in long-time working and 20% of top-ranking income quintile are in the standard-time working in overall. Working-time classes can be divided up into three: short time-low income of type 1, long time-medium income of type 2 and standard time-high income of type 3. Analysing working time type, the low wage-short time, medium wage-long time and high wage-standard time by the wage per month and low wage-very long time, medium wage-long time and high wage-standard time by the wage per hours are confirmed. Also, stratification of working-time has been intensified in terms of age, jobs and work status. Policy implication from this study is that the increase of minimum wage to the lowest income class and creation of employment by the reduction of working-time to the medium income class could be effective policies.

• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.141-146
• /
• 2020

Cine-Hangeul is a program that can predict the running time of a movie based on the screenplay before production. This paper seeks to verify the prediction reporting function of Cine-Hangeul, which is the standard Korean screenplay format. Moreover, this paper presents a method to increase the accuracy of the Cine-Hangeul reporting function. The objective of this paper is to offer a correction method based on scientific evidence because the current Cine-Hangeul reporting function has many errors. The verification process for five scenarios and movies confirmed that the default setting value of Cine- Hangeul's screening time prediction reporting was many errors. Cine-Hangeul analyzes the amount of textual information to predict the time of the scene and the time of the dialogue and helps predict the total time of the movie. Therefore, if a certain amount of text information is not available, the accuracy is unreliable. The current Cine-Hangeul prediction report confirms that the efficiency is high when the scenario volume is about 90 to 100 pages. As a result, prediction of screening time by Cine-Hangeul, a Korean scenario standard format program, confirmed the verification that it could secure the same level of reliability as the actual screening time by correcting the reporting settings. This verification also affirms that when applying about 50 percent of the basic set of screening time reporting, it is almost identical to the screening time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.561-571
• /
• 2001

The standard uncertainty of flowrate measurement is obtained by combining that of independent variables. Gravimetric and volumetric method were applied to determine the flowrate and the standard uncertainties of flowrate measurement by both methods were evaluated in accordance with the procedure recommended by International Organization for Standardization. The combined standard uncertainties of determining the flowrate were estimated from the sensitivity coefficient and the standard uncertainty of independent variables. For practical application, the methods for evaluating and expressing uncertainty in flow measurement were discussed. It was found that the uncertainties of the weighing and time measurement in gravimetric method, the volume and time measurement in volumetric method have dominant influence on that of flowrate measurement. With the quantitative analysis of the sensitivity coefficient, the contribution of the each variable uncertainty to the combined standard uncertainty of flowrate measurement is shown clearly.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.27-31
• /
• 2012

This paper proposes a new method of character segmentation in a grayscale image using the standard deviation. Firstly, the proposed method scans vertically the region of interest in an image in order to calculate a standard deviation for each scan line. Characters' standard deviations are much bigger than the background's. Therefore, it is possible to segment characters vertically using the differentiation of those two types of standard deviations. Secondly, the method scans each vertically segmented image horizontally at this time, and then segments each image similarly. The proposed method is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiments were conducted by using credit card images. The results show that the proposed algorithm is quite successful for most credit cards. However, the method fails in some credit cards with strong background patterns.

• Korean Journal of Acupuncture
• /
• v.28 no.4
• /
• pp.41-48
• /
• 2011

Objectives : This study aimed to explore the passive multi-channel time series analysis method by measuring bio-potentials of acupuncture point and the peripheral region Methods : Bio-potential was measured at ST36 and the peripherical region of ST36 of 5 healthy volunteers at three times. The diagram of the potential changes over time were smoothed by moving average method and similarities of ST36 and the other points were calculated. Results : In the normal weight group, bio-potential similarity tended to decrease in proportion to the distance from the acupuncture point. In the obesity group, bio-potential similarity appeared in a very wide area. Bio-potential similarity had positive correlation with BMI value. Conclusions : The passive multi-channel time series analysis method showed the possibility be appropriate for the electrical characteristics study of meridians.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.974-978
• /
• 1991

Electro-pneumatic valve is an electro-mechanical device which converts electric signal into pneumatic flow mu or pressure. A measurement of dynamic response time is very important to evaluate valve performance. Dynamic response time of electro-pneumatic valve has a variation accordance with valve types, operating way and test standard. In this study, automatic measurement system of dynamic response time is composed based on test condition of dynamic response time test standard(CETOP, JIS). Also, in this study test pressure variation characteristics accordance with variation of solenoid excitation power, and we developed dynamic response measurement system enable to compare of and analyze these two characteristics.

• Journal of Korean Society for Quality Management
• /
• v.50 no.4
• /
• pp.793-810
• /
• 2022

Purpose: As improving the search performance of aviation security equipment is considered essential, this study proposes the need for research on how to find an optimized test sequence that can reduce test time and operator power during the search function test of explosive detection systems. We derive the weights and work difficulty adjustment factor required to find the optimized test order. Methods: First, after setting the test factors, the time of each test and the difficulty scale determined by the worker who performed the test directly were used to derive weights. Second, the work difficulty adjustment coefficient was determined by combining the basic weight adjustment factor and corresponding to the body part used by the test using objective rating. Then the final standard time was derived by calculating the additional weights for the changeability of the test factors. Results: The order in which the final standard time is minimized when 50 tests are performed was defined as the optimized order. 50 tests should be conducted without duplication and the optimal order of tests was obtained when compared to previously numbered tests. As a result of minimizing the total standard time by using Excel's solver parameters, it was reduced by 379.14 seconds, about 6.32 minutes. Conclusion: We tried to express it in mathematical formulas to propose a method for setting an optimized test sequence even when testing is performed on other aviation security equipment. As a result, the optimal test order was derived from the operator's point of view, and it was demonstrated by minimizing the total standard time.