• 전기학회논문지
• /
• 제63권11호
• /
• pp.1564-1570
• /
• 2014

An electric vehicle (EV) not only receives electric power from the electric vehicle supply equipment (EVSE), but it also exchanges the information regarding charging process with the power gird through the EVSE. However, the EV and EVSE communicate using the ISO/IEC 15118 standard while the EVSE and power grid communicate using the IEC 61850 standard. Therefore, the EVSE should support both the ISO/IEC 15118 and IEC 61850 standards, and provide a data mapping function between the two communication protocols so that the EV and power grid, which support different protocols, can communicate with each other throughout the charging process. In this paper, we propose a mapping method of the EVSE, which converts the ISO/IEC 15118 data to IEC 61850 and vice versa, based on the XML schema of each protocol. The proposed method converts the data using the XSL (eXtensible Stylesheet Language) method, which defines the data mapping between two XML schemas. Our approach is more flexible and easier to maintain against changes in charging scenarios and the standards than other existing approaches such as one-to-one data mapping methods.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2016

We developed eco-friendly lightweight concrete in order to apply eco-friendly lightweight concrete into structural wall or slab of shallow depth urban railway system. However, since lightweight aggregate has different structural feature of porous and it has been overvalued at current KS standard when applied, we did compare the characteristics of freezing and thawing of normal weight aggregate concrete by comparative test method(KS, ASTM). According to test method, there was a big difference of dynamic elastic modulus in lightweight concrete rather than in normal weight aggregate concrete. The big absorption factor in lightweight aggregate is main reason for that. For more detail, in KS law in which only 14 days water curing is carried out, the big amount of moisture in lightweight aggregate is frozen and high heaving pressure occurs and finally that lead to destruction of lightweight concrete. Therefore, it is considered that in case of lightweight concrete, resistibility against freezing and thawing has been undervalued in domestic KS law compared to ASTM law, which is overseas standard. So, a variety of examination about testing criteria and rule would be necessary for exact assessment of lightweight concrete.

• 방송공학회논문지
• /
• 제2권1호
• /
• pp.24-35
• /
• 1997

디지털 위성 방송의 비디오 화질 의 주관적 평가 시험을 MPEG-2 MP@ML 표준에 기초하여 설계된 하드웨어 부호화기/복호화기 기본 화질 평가와 위성 전송 에러 화질 및 전송 시스템 성능에 따른 화질 열화에 대한 시험을 위성 시뮬레이터(Satellite Simulator)를 사용해 실시간에서 수행하였다. 평가 방법으로는 CCIR 500-5의 2중 자극 열화 척도법과 2중 자극 연속 화질 척도법을 사용하였다. 또한 디지털 위성 방송 시스템의 화질을 전체 시스템 즉 MPEG-2코덱, 다중화 장치, 채널 코덱, 변복조기, 안테나 등을 연계시켜 여러 비트율과 비트 오류율에서 평가 시험을 수행함으로써 시스템 전반적인 성능을 평가하고 위성 전송로와 수신 시스템을 연계한 전송로 환경을 고려한 보다 통합적인 화질 평가 시험을 수행하였다. 특히 전송로 오류 화질 평가에 있어서 주어진 5가지의 BER에 대하여 전송 에러 화질은 평균적으로 5단계 카테고리에서 3.9이상을 유지함을 알 수 있었다. 필름 모드와 같은 낮은 비트율(특히 2Mbps)에서 코덱 시스템의 부호화 화질의 성능은 영상 소스의 통계적 성질에 따라 크게 좌우됨을 알 수 있었고 평균적으로 절대 평가 기준에서 2.7정도를 기록하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.172-175
• /
• 2004

This study is to investigate the tensile properties of glass fiber reinforced polymer(GFRP) reinforcing bars with various kinds of anchor systems experimentally. Three types of anchor systems were examined: resin sleeve anchor adopted by CSA Standard, metal overlay anchor by ASTM Standards and wedge anchor normally used in prestressing tendons. Also, three different types of GFRP bars with different surface deformations were tested in this study. All test procedures including specimens preparation, test apparatus and measuring devices were made according to the recommendations of CSA Standard S806-02. From the test results, it was found that the highest tensile strength of GFRP bar was developed by resin sleeve anchor, and tensile strength of GFRP bar with CSA anchor system is $10\%$ higher than that with ASTM anchor system in the case of sand-coated GFRP bar.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.65-75
• /
• 1998

The cases of welders illness by welding fume generated during arc welding are recently reported, which makes the legal regulation in the welding work place. Also, this situation makes the employers and welders be concerned about the welding fume seriously. At this point of time it is necessary that a standard testing method is developed as a fundamental tool for the evaluation of Fume Generation Rate(FGR) required for making progress in the development of low fume electrodes and welding process technology and also constructing the ventilation system in welding area. However, the current standard(KS D 0062) is only applicable to the manual covered electrode arc welding. In this study the evaluation procedure for the FGR is established by developing the fume collection chamber which can be applicable to semiautomatic and automatic arc welding as well as manual arc welding. This evaluation system and procedure can be used as a tool not only to develop the low fume welding electrode and welding process technology but also to construct the equipment controlling the welding workshop atmosphere.

• 생약학회지
• /
• 제9권2호
• /
• pp.83-88
• /
• 1978

From phytochemical screening of the seven species of Caryophyllaceae, that is, one species of Melandrium, and Dianthus and Pseudostellaria, two species of Stellaria and Cerastium the following compounds were identified. 1) aldehyde, sugars, other reducing compounds and glycosides from the above mentioned seven species of Caryophyllaceae were identified by thin layer chromatography method and comparison of Rf values with the standard substances. 2) Saponins, steroids and terpenoids showed positive reaction with the Froth testing in all of seven plants. Five species of plant showed positive reaction with Liebermann-Buchard test. 3) Flavonoid and polyphenolic compounds were identified by the spots in TLC-test and chlorogenic acid showed the same Rf values with the standard substances. 4) The spots of alkaloid were shown at Rf=0.68 (Stellaria aquatica) and at Rf=0.71 (Pseudostellaria palibiniana) and at Rf=0.70, and 0.44 (Dianthus sinensis).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.443-446
• /
• 1997

This paper raises issues in testing the absorption coefficients of sound-absorptive samples in the standing wave tube according to the Korean standard of KS F 2814. The code does not consider any effect of air-damping during test. This limitation has been shown to yield much variation of sound absorption coefficients for recent sample tests whose coefficients are less than 10 %. An improved method of calculating the sound absorption coefficients is proposed in this work and its effectiveness in real test is also illustrated. Finally, the guide line for the modification of our national standard code KS F 2814 is suggested for the future.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.53-56
• /
• 2005

High flowable concrete was first developed in 1988 to achieve durable concrete structures. High flowable concrete can improve workability sharply reason why the concrete has properties of resistance to segregation, filling ability, passing ability without compacting. Therefore, as we apply a high flowable concrete to a large dimensional tunnel which constructed in special environment, we can get workability, strength and durability required. Tunnel lining concrete with a large dimension has to use necessarily fly ash and slag for the properties of high flowability and watertight. We can expect improvement of workability and durability, mitigation of hydration, reducing shrinkage, enhancement of watertight by using cementitious materials. This paper proposes investigations for establishing a mix-design method and high flowability-strength testing methods have been carried out from the viewpoint of making a standard concrete tunnel lining with large dimension a standard.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1425-1434
• /
• 2009

This study was aimed at comparing and assessing SPT-N values both measured by automatic and manual record devices of Standard Penetration Test. As a result, energy efficiency of hammer was approximately 62.9%, meaning SPT-N value measured by automatic recording device showed relatively accurate performance that the one done by manual device. Given the relations between hit frequency of automatic recording device and intrusion, the characteristics of stratum are expected to be proved in more accurate way. Additionally, higher confidence level seems to make it preferred and quality assessment method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.131-136
• /
• 2002

Performance test is carried out in accordance with "performance test standard for Electrical Multiple Unit", noticed by Ministry of Construction ＆ Transportation in 2000. The object of this standard is to ensure that vehicle is tested after completion and before entry into service. Performance test is classified by type test to be carried out for the first car and its components in order to verify their performance and by routine test to be carried out on the whole quantity in order to prove the performance of individual items. Scope of the test is divided by components, completed car, preliminary adjustment test and running test on main line. The paper introduces a testing procedure and an execution method of the performance test.