• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.261-262
• /
• 2012

The field application through the quality control of self adhesive rubberized asphalt waterproofing sheet was regulated by KS F 4934 of Korea Standard in 2003. However, regulations that different material properties of self-Adhesive waterproofing sheets are difficult on the standard. Therefore, this research was performed for of quality control all affiliations of self-adhesive waterproofing sheet through basic properties test and proposed quality standard revised bill in KS F 4934.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.4 no.1
• /
• pp.54-62
• /
• 1990

This paper shows a reasonable design standard of Demand Factor and Diversity Factor for buildings, that was made by the systematic and statistical way considering actual conditions, such as investicated electric equipment capacity, electric power consumption, etc. The saving of electric equipment investment, the decrease of power loss, the improvement of facilities utilization and the decrease of electric power rates, can be contributed by the application of the design standard. The recommended design standard must be applied by the revision of current regulations and laws.

• Journal of Digital Convergence
• /
• v.5 no.2
• /
• pp.25-36
• /
• 2007

In this paper, we studied on the effective structure of an e-Learning Korean Support System for foreigner based on computer systems which is to obey the rules of IMS/AICC International Standard regulations based on LCMS and SCORM. The most important task on this study is to support the function of self-study module through the review of the analysis and results of Korean learning and learning customs. We studied the effective PMS detail modules as well as the Standard Competency Module Management System, which related to LMS/LCMS, Learning an Individual Competency Management System, Competency Registry/Repository System, Knowledge Management System based on Community Competency Module, Education e-survey System and Module learning Support Service System. We suggested one of standard Effective Model of learning Korean Support System which is adopted in a various techniques for foreigner.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1156-1164
• /
• 2006

According to Korean railway safety law and its ordinances, the Korean railway standard(KRS)s to recommend railway operators and manufacturers the regulations for safety and inter-operability of railway system were enacted in the early 2006. In order to reflect rapidly advancing railway technologies and correspond to the international railway standard led by Europe and Japan, KRSs should be confirmed and revised continuously. This paper deals with recent trends in enacting international standards by IEC and the Europe and Japan's activities for this, and presents advancement directions for KRS.

• Food Science of Animal Resources
• /
• v.36 no.5
• /
• pp.612-616
• /
• 2016

This study was conducted to investigate the condition of frying oil used for frying chicken nuggets in a deep fryer. The acidification of the frying oils used, soybean oil (SB), canola oil (CA), palm oil (PA), and lard (LA), were determined as peroxide value, acid value, and fatty acid composition, after chicken nuggets were fried in them for 101 times. The acid value and peroxide value obtained were 5.14 mg KOH/g and 66.03 meq/kg in SB, 4.47 mg KOH/g and 71.04 meq/kg in CA, 2.66 mg KOH/g and 15.48 meq/kg in PA, and 5.37 mg KOH/g and 62.92 meq/kg in LA, respectively. The ranges of the major fatty acid contents were palmitic acid, 8.91-45.84%; oleic acid, 34.74-58.68%; linoleic acid, 10.32-18.65%; and stearic acid, 2.28-10.86%.Used frying oils for food except animal products have a legal limit for the freshness standard, set by the Food Codex regulations (AV<2.5, POV<50). Therefore, this study could help develop a freshness standard for frying oils used for animal products such as chicken nuggets. Based on the quality limits associated with food regulations stated, we suggested that the estimated frying times before acceptable freshness was exceeded were 41 for SB, 38 for LA, 53 for CA, and 109 for PA. This data may be useful in determining food quality regulations for frying oil used for animal products.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.77-83
• /
• 2010

In this study, we tried to determine any detrimental effects on water quality when bottom ash obtained from a coal-fired power plant intended to be used as a fill material in construction sites. Physical-chemical properties of bottom ash were determined using proximate analysis, elemental analysis, XRD, and XRF. Classification of bottom ash as a waste material and soil contamination due to the use of bottom ash were performed by Korea waste standard leaching test and soil toxicity test, respectively. Results of leaching tests were compared to the regulations for water quality and groundwater quality and no harmful effects on water quality were found. Most of heavy metals in leachate were below detection limits but trace amount of $Cr^{6+}$ was found. However, concentration of $Cr^{6+}$ was below the regulation criteria. Column leaching tests indicated that concentrations of Pb and Zn were slightly higher than regulations but below regulations within 1 PVE, but concentrations of sulfate were 10 times higher than regulation and thus, the required time to reach regulation was almost 8 PVE.

• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.209-219
• /
• 2018

In the areas of RoHS, WEEE, ELV and REACH, reinforcement of environmental regulations against harmful substances is a global trend not only in EC but also in all over the world. In the fields of Korea's major export products such as material parts, electrical and electronic products and automobile parts, we are responding to these regulations consistently. To develop reference material for analyzing lead and cadmium in paints, the candidate materials were produced through the screening process which separated shapes and sizes. To secure the traceability of the candidate materials produced, the characteristics and uncertainties are estimated by ICP-AES analysis using the primary reference material. The short-term and long-term stabilities also are evaluated in parallel. In order to calculate the final certification value of the candidate material, the verification were carried out by the performance evaluation through the comparison among the KOLAS (Korea Laboratory Accreditation Scheme) laboratories, and the CRM was produced in accordance with ISO Guide 35. The certified values and uncertainties of Pb and Cd of the final paint standard, determined according to the joint analysis among laboratories, are Pb [($191.4{\pm}3.1$) mg/kg, ($944.1{\pm}5.6$) mg/kg] and Cd [($45.0{\pm}2.6$) mg/kg, ($225.5{\pm}3.5$) mg/kg]. These standard materials were developed to enhance the reliability of measurement analysis, including the validity and traceability of measurement results. Also it is expected that the CRM will be used as QCM (quality control material) for the product design and the process monitoring, so that regulation and management of hazardous heavy metals can be systematically implemented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6203-6207
• /
• 2012

The aim of the study was to develop an objective measurement tool, which could measure radiation safety regulations as an advanced research to draw evidentiary conclusions for the rationalization of radiation safety regulations as organizations continuously increase consumption of radiation material. The survey was based on the contents of Vol 1~21 of US NRC NUREG 1556 (Consolidated Guidance About Materials Licenses) and material from the Nuclear Safety Act which was based on radiation safety managers who are responsible for about 10% of the domestic registered organizations for radiation usage. As a result of the analysis, 3 main causes were extracted based on 20 questions. Each causes were named as Cause 1: 'Radioactive Safety Regulations Requirements', Cause 2: 'Compatibility of Actual Safety Regulation', and Cause 3: 'RI/RG radiation Source Classification' respectively. The dispersal explanations of each causes were explained in total of 60.417% by 40.140% of Cause 1, 13.721% of Cause 2, and Cause 3 for 6.556% If radiation safety regulation standards are drawn using the radiation safety regulation measurement tool, which is suggested in this study, this could be not only comply with international standards but also could be used to propose a practical standard to domestic radiation safety managers.

• Journal of the Korean Society of Safety
• /
• v.22 no.5
• /
• pp.7-12
• /
• 2007

The safety standard for suspended access equipments(SAE) is developed. During the development of the safety standard, consideration was given to a close examination of the standards existing in other industrialized regions and nations such as the Eu.opean Union(EU), the United States, and Japan, as well as the existing domestic safety regulation. Also, a consideration was given to the appraising of the technical level and market conditions of the domestic industry. After careful examination of the current safety practices and issues, it was decided that the standard under development should closely follow those of the EU safety standard. The EU standard provides a detailed account of the calculation methods, safety and stability factors, testing apparatus and procedure, all under unified framework. A number of specific safety requirements have been modified in an effect to properly reflect the difficulties faced by the domestic industry. It is hoped that the safety standard developed here can serve as a valuable tool for policy decisions regarding worker safety.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1392-1397
• /
• 2008

This study is to measure the change of the $CO_2$ and floating dust concentration depending on the volume of the ventilation and the state of on/off the ventilation for the estimation of the air pollution in classroom. The results could be summarized as follows: the test cell was the two full scaled model and the one is set up with ventilation system another was not. the volume of classroom is 170.1m3 and the number of persons are 35. 1)when the ventilation system was not installed, The experimental results of the $CO_2$ concentration showed the average of 2,150ppm and the maximum of 2,740ppm in the classroom. This was the higher than 1,000ppm, the standard value of ASHRAE and the enforcement regulations of School Sanitation Code in Ministry of Education & Human Resources Development, 1000ppm. The $CO_2$ concentration was relatively increasing during school hours. 3)In case of the volume of ventilation of $800m^3$/h, the $CO_2$ concentration of classroom showed the average of 962 ppm and the maximum of 1,380 ppm. This was higher than 1,000ppm, the standard of ASHRAE and the enforcement regulations of School Sanitation Code in Ministry of Education & Human Resources Development. 4)The floating dust(PM10) was the maximum of 0.52 mg/$m^3$, the minimum of 0.25 mg/$m^3$, and the average of 0.32 mg/$m^3$ in case of the ventilation system off. Those were higher than the standard value 0.15 mg/$m^3$. In case of the ventilation system on, the floating dust(PM10) was the maximum of 0.174 mg/$m^3$ , the minimum of 0.048 mg/$m^3$, and the average of 0.078 mg/$m^3$. These were the lower than 0.15 mg/$m^3$, the standard of the enforcement regulations of School Sanitation Code in Ministry of Education & Human Resources Development. 5)The concentrations of $CO_2$ and PM10 were largely depending on the number of students and the ventilation system, The installation of the ventilation system is necessary for the amenity environment and the management of the indoor air quality.