• Annals of Clinical Neurophysiology
• /
• v.19 no.1
• /
• pp.13-19
• /
• 2017

Background: Median F-wave latencies are physiologically shorter than ulnar latencies, but they are often longer relative to ulnar latencies in carpal tunnel syndrome (CTS). This study aimed to investigate the value of absolute F-waves and relative latency changes compared to ulnar latencies in the diagnosis of CTS. Methods: F-wave latencies of median and ulnar nerves in 339 hands from 339 patients with CTS and 60 hands from 60 control subjects were investigated. Mean F-wave minimal latencies of median and ulnar nerves were compared between groups. Patients were further divided into subgroups based on Canterbury grading and then analyzed using F-wave latency differences (FWLD) and F-wave ratio (FWR). Results: Of 339 hands in the CTS group, 236 hands exhibited F-wave inversion based on the FWLD criterion and 277 hands had F-wave inversion based on the FWR criterion. F-wave inversion had a sensitivity of 81.7% using the FWR criterion to diagnose CTS. The mean FWLD and FWR were significantly greater in all patient subgroups compared to the control group (p < 0.001). In addition, mean FWLD and FWR showed significant correlations (r = -0.683 and r = 0.674, respectively, p < 0.001) with disease severity. Conclusions: F-wave studies are effective supplementary diagnostic tools comparing to other standard electrophysiologic criteria for screening patients with CTS.

• Journal of Preventive Medicine and Public Health
• /
• v.13 no.1
• /
• pp.27-34
• /
• 1980

Purpose of this study is to find out proper means of estimating the urinary mercury excretion in the normal individuals. Whole void volume was collected every 2 hours beginning from 6 o'clock in the morning until 6 o'clock next morning. Mercury excretion in each urine specimen was measured by NIOSH recommended dithizone colorimetric method (Method No.: P & CAM 145). Urinary concentration of mercury was adjusted by two means: specific gravity of 1.024 and a gram of creatinine excretion per liter of urine comparing the data with the unadjusted ones. Mercury excretion in 24-hour urine specimen was calculated by adding the amounts measured with the hourly collected specimens of each individual. Statistical analysis of the urinary mercury excretion revealed the following results: 1. Frequency distribution curve of mercury excreted in urine of hourly specimens was best fitted to power function expressed in the form of $y=ax^b$. Adjustment of the urinary mercury concentration by creatinine excretion was shown to be superior($y=1674x^{-1.52},\;r^2=0.95$) over nonadjustment($y=2702x^{-1.57},\;r^2=0.92$) and adjustment by specific gravity of 1.024($y=4535x^{-1.66},\;r^2=0.93$). 2. Both log-transformed mercury excretion in hourly voided specimens and mercury excretion itself in 24 hour specimens showed the normal distributions. 3. The frequency distribution of mercury adjusting the urinary concentration of mercury by creatinine excretion was best fitted to a theoretical normal distribution with the sample means and standard deviation than those unadjusted or adjusted with specific gravity of 1.024. 4. Average urinary mercury excretions in 24-hour urine specimen in an individual were as follows: a) Unadjusted mercury excretion mean and standard deviation : $$18.6{\pm}13.68{\mu}gHg/l$$. median : $$16.0\;{\mu}gHg/l$$. range : $$0.0-55.10\;{\mu}gHg/l$$. b) Adjusted with specific gravity mean : $$20.7{\pm}11.76\;{\mu}gHg/l{\times}\frac{0.024}{S.G-1.000}$$ median : $$20.7\;{\mu}gHg/l{\times}\frac{0.024}{S.G-1.000}$$ range : $$0.0-52.9\;{\mu}gHg/l{\times}\frac{0.024}{S.G-1.000}$$ c) Adjusted with creatinine excretion mean and standard deviation : $$10.5{\pm}6.98\;{\mu}gHg/g$$ creatinine/l median : $$9.4\;{\mu}gHg/g$$ creatinine/l range : $$0.0-26.7\;{\mu}gHg/g$$ creatinine/l 5. No statistically significant differences were found between means calculated from 24-hour urine specimens and those from hourly specimens transformed into logarithmic values. (P<0.05).

• Journal of Korean Neurosurgical Society
• /
• v.44 no.4
• /
• pp.222-227
• /
• 2008

Objective : Malignant gliomas are the most common primary cerebral neoplasms in adults. Despite multimodality treatments, the prognosis for patients with malignant glioma remains poor. However, recently, the effectiveness of concomitant chemoradiotherapy (CCRT) with temozolomide (TMZ) has been reported. We report for the first time preliminary results of the treatment with CCRT of newly diagnosed malignant gliomas in Korean people. Methods : Thirty-two patients over the age of 17 years with newly diagnosed and histologically confirmed high-grade gliomas (HGG), from June 2004 to August 2007 were the subjects of this study. There were 17 men and 15 women, with a median age of 53.5 years (range, 17-74). Pathologically, glioblastoma, anaplastic astrocytoma, anaplastic oligodendroglioma, and gliomatosis cerebri had been diagnosed in eighteen, eight, four, and two patients, respectively. These 32 patients were treated with CCRT with TMZ. Results : The median follow-up period was 12.5 months (range 3-48). At the time of this analysis, 13 patients died and three patients had been lost to follow-up. There was no mortality caused by drug toxicity. The median progression-free survival (PFS) of these patients was 9.0 months, and the six-month PFS rate was 72.4%. The median overall survival (OS) was 26 months, and the one-year OS rate was 83.6%. The 18 patients with glioblastoma were analyzed separately from the other patients with HGG, and the median OS was 18 months, and the one-year OS rates were 81.8%. The median PFS was seven months, and the six-month PFS rate was 75.0%. Conclusion : Our results are consistent with many other reports, confirming that CCRT with TMZ achieves good clinical outcomes in the treatment of HGG. Therefore, we suggest that CCRT with TMZ as adjuvant chemotherapy be considered as a standard therapy for patients with HGG.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.113-124
• /
• 2006

Among tile traffic safety facilities, median barriers are installed above 4-lane national roads due to the awareness of haying an effect on preventing the front collision. Studies about the installation effect analysis of median harrier have been carried out through both at home and outside, mainly indicating total accident reduction effect on pertinent sections. In sum, study about how the accident occurrence form is changed at the point classified by the accident type or severity is insignificant. In the case of outside the country, calculating the accident reduction effect according to the type of median barriers is main research and in domestic, though there is a part of researches assessing reduction effect by accident types, it is not reliable in the view or statistics because of using only 1year's before-aftev data installing the facility, So in this Paper. it is the main purpose to presume the accident conversion effect. For this, we conduct an investigation and collect data about 7-year's accident data containing before-after Project, safety facilities foundation records and index of road alignment on the subject of 4-1ane national roads(108.6km) existing median barrier. Next. using the empirical bayes method, we estimate a model construction and accident conversion effect of accident type severity. We expect the result or this Paper will be applied for a policy execution and Presentation of facility standard related to median barrier from now on.

• The Korean Journal of Applied Statistics
• /
• v.14 no.2
• /
• pp.463-473
• /
• 2001

선형모형의 회귀계수의 L$_1$-추정량의 점근분포는 오차항의 중앙값에 종속되어있는데, 이 값은 잔차의 순서통계량의 함수로 추정될 수 있다. 본 논문에서는 오차항 중앙값의 추정량을 유도하는 몇 가지 방법을 소개하고 몬테칼로 실험을 통하여 가장 바람직한 추정량의 형태를 제안하였다. 또한 제안한 추정량을 이용하면 검정문제에서도 좋은 결과를 얻을 수 있음을 보였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.3
• /
• pp.207-214
• /
• 2006

In this paper, the stability of SA(Spectral Acceleration) fragility curves is studied for the two sets of elastic modulus of concrete. In doing that, general purpose structural analysis program and generally used probability density function are used. The results of structural analysis are represented by Bernoulli distribution which says damage or no damage. By the use of Maximum Likelihood Method, two parameters of lognormal distribution - median and standard deviation - are found. With them, the fragility curves are constructed.

• Journal of the Korean Data and Information Science Society
• /
• v.1
• /
• pp.47-57
• /
• 1990

A method which determines the number of replications in the simulation is proposed, particularly for small-sample comparison of estimators. This method takes the smallest number of replications that makes the difference of mean square errors be statistically significant and provides an efficient algorithm for calculating the standard error of the mean square error. Two examples are illustrated, the first one is on comparison of mean and median ; the second, the Kaplan-Meier type and Buckley-James type estimators of a quantile function with censored data.

• Journal of Chest Surgery
• /
• v.25 no.7
• /
• pp.719-722
• /
• 1992

Two cases of benign mediastinal tumor were treated by complete resection under the video-thoracoscopic guidance. The procedure has been performed on the 2 patients, allowing definite treatment and was less invasive than standard surgical treatment. The 2 patients have been benefited by decreased postoperative pain, reduced scarring of the skin and rapid recovery. Two patients had benign mediastinal tumors; teratodermoid on anterior mediastinum and neurilemmoma on posterior mediastinum. There were no operative death and complication, median hospital stay was four days.

• Toxicological Research
• /
• v.30 no.3
• /
• pp.185-191
• /
• 2014

Statistical methods are frequently used in toxicology, yet it is not clear whether the methods employed by the studies are used consistently and conducted based on sound statistical grounds. The purpose of this paper is to describe statistical methods used in top toxicology journals. More specifically, we sampled 30 papers published in 2014 from Toxicology and Applied Pharmacology, Archives of Toxicology, and Toxicological Science and described methodologies used to provide descriptive and inferential statistics. One hundred thirteen endpoints were observed in those 30 papers, and most studies had sample size less than 10, with the median and the mode being 6 and 3 & 6, respectively. Mean (105/113, 93%) was dominantly used to measure central tendency, and standard error of the mean (64/113, 57%) and standard deviation (39/113, 34%) were used to measure dispersion, while few studies provide justifications regarding why the methods being selected. Inferential statistics were frequently conducted (93/113, 82%), with one-way ANOVA being most popular (52/93, 56%), yet few studies conducted either normality or equal variance test. These results suggest that more consistent and appropriate use of statistical method is necessary which may enhance the role of toxicology in public health.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.5
• /
• pp.1257-1263
• /
• 2003

The modified engineering methodology and the modified electronic circuit in classical ultrasonic principles were applied to ultrasonic aerosol nebulizer for inhalation toxicology study of cadmium aerosol. 1532.96ppm Cd nebulizing solution was used to generate cadmium aerosol for particle size analysis with the modifying source and inlet temperatures. The results of particle size analysis for cadmium aerosol were as following. The highest particle counting for source temperature 20℃ was 399.75 × 10² in inlet temperature 100℃ and particle diameter 0.75㎛. The highest particle counting for source temperature 50℃ was 399.70 × 10² in inlet temperature 50℃ and particle diameter 0.75㎛. The highest particle counting for source temperature 70℃ was 411.14 × 10² in inlet temperature 100℃ and particle diameter 0.75㎛. The ranges of geometric mean diameter were 0.74-0.79㎛ in source temperature 20℃, 0.65-0.72㎛ in source temperature 50℃, and 0.65-0.80㎛ in source temperature 70℃. The smallest geometric mean diameter was 0.65㎛ in source temperature 50, 70℃ and inlet temperature 20, 50℃, and the largest geometric mean diameter was 0.80㎛ in source temperature 70℃ and inlet temperature 100℃. The ranges of geometric standard deviation were 1.71-1.80 in source temperature 20℃, 1.27-1.61 in source temperature 50℃, and 1.27-2.29 in source temperature 70℃. The lowest geometric standard deviation was 1.27 in source temperature 50, 70℃ and inlet temperature 20, 50℃, and the highest geometric standard deviation was 2.29 in source temperature 70℃ and inlet temperature 100℃. Generated aerosol for cadmium inhalation toxicology study was polydisperse aerosol with the above geometric standard deviation 1.2. The ranges of mass median diameter(MMD) were 1.75-2.25㎛ in source temperature 20℃, 1.27-1.61㎛ in source temperature 50℃, and 1.27-2.29㎛ in source temperature 70℃. The smallest MMD was 1.27㎛ in source temperature 50, 70℃ and inlet temperature 20, 50℃, and the largest MMD was 2.29㎛ in source temperature 70℃ and inlet temperature 100℃. Cadmium chloride concentration in nebulizing solution affected the particle size and distribution of cadium aerosol in air. MMO for inhalation toxicology testing in OECD and EU is less than 3㎛ and EPA guidance is less than 4㎛. In our results, in source temperatures of 20, 50, 70℃, and inlet temperatures of 20, 50, 100, 150, 200, 250℃ were conformed to the those guidance.