• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.929-934
• /
• 2000

Optimum stand density of alfalfa (Medicago sativa L.) varies with locations and climates. Stand density is one of the factors that determines herbage yield, forage quality and persistence of alfalfa. As establishment costs increase, the question arises whether present population densities are optimum for obtaining maximum herbage yield and forage quality. The objectives of this study were: 1) to determine the optimum plant density for highest herbage yield and forage quality for the dehydrated alfalfa industry under Edmontons climatic conditions in Alberta, Canada; 2) to compare herbage yield and forage quality of the cultivars 'Algonquin' and 'Vernal' grown at a range of stand densities. Alfalfa seedlings of both cultivars were either transplanted at spacings of 6, 10, 15 and 25 cm or direct seeded at the 4.5 cm plant spacings, providing population densities of 494, 278, 100, 45 and $16plants/m^2$. The experimental design was a randomized complete block with a split-plot arrangement having three replicates; the main plots consisted of two alfalfa cultivars Algonquin and Vernal, and the sub-plots were the five population densities. The cultivar Vernal had significantly higher annual yield than did the cultivar Algonquin. There was no significant effect of plant density on herbage yield. There was no difference in crude protein (CP) between the two cultivars. At the first cut, there was a significant quadratic effect of plant density on CP content and the greatest CP occurred at the 100 plants/m2 density. Crude protein was not affected by plant density at the second cut. Acid detergent fiber (ADF) and neutral detergent fiber (NDF) were not affected by plant density. The cultivar Algonquin usually had a lower ADF and NDF than cultivar Vernal. In conclusion, high population densities ($278plants/m^2$ or more) of alfalfa did not improve herbage yield and forage quality compared with low plant population densities ($100plants/m^2$ or less) of alfalfa.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.119-127
• /
• 2018

A test stand for an altitude test of reciprocating engine was designed, manufactured and validated by preliminary tests and simple calculations. The test stand was designed to interface with the altitude turbo-shaft engine test facility of Korea Aerospace Research Institute. Many limiting conditions for altitude test of reciprocating engine were assumed and the test stand was developed to satisfy these limitations. The test stand design was focused especially on the altitude, Mach number and fuel temperature control for reciprocating engine altitude tests with smaller air and fuel flow than those of turbo shaft engines.

• Journal of Plant Biology
• /
• v.15 no.4
• /
• pp.1-12
• /
• 1972

To study on the annual height growth of Pinus densiflora within natural pine stands in central Korea, twenty two pure closed Pinus densiflora stands were selected subjectively in the west-central region of Korea. In each stand twenty trees were chosen randomly. For each tree, abotu ten to fifteen measurements of internodal lengths were made from leader top to trunk base. A total of one hundred thirty four soil samples was collected. Each soil sample was bulked with three subsamples. The ranges of the growth measurements per stand, per tree and per observation were 14.9-35.4cm, 9.0cm-54.4cm and 2.4cm-69.0cm respectively. The total mean value was 23.5cm. The Student-Newman-Keul's tests for the multiple comparison among the mean values of the height growth per stand were very highly significant. The resutls of the analysis of variance of the height growth data for the selected fifteen stands among the twenty two stands indicate that sampling efficiency might be increased to 744% if measurement of the growth were made on fifteen trees per stand from twenty stands instead of twenty trees per stand from fifteen stands. The annual height growths of Pinus densiflora and Pinus koraiensis for the period from 1960 to 1968 were 21.74$\pm$5.29cm (10) and 20.56$\pm$5.59cm (10) respectively. The total means of easily-soluble phosphorus, total nitrogen, loss on ignition and pH for the soil samples were 2.8 ppm, 0.09%, 5.4% and 4.7 respectively. The ranges of those amounts were 18.7-1.7ppm, 0.17-0.05%, 11.6%-3.1%, 3.9-5.1 respectively. The relationship of the annual height growth of P. densiflora to soil was studied in terms of standard partial multiple regression. Among soil properties such as non-capillary pore space, capillary pore space, maximum field capacity, loss on ignition, soil reaction, total nitrogen and easily-soluble phosphoros investigated, the easily soluble phosphorus in one analysis and loss on ignition and soil reaction in the other analysis seem to have significant positive influence on the annual height growth.

• Journal of Korean Society of Forest Science
• /
• v.18 no.1
• /
• pp.1-7
• /
• 1973

This survey was estimated under the ratio estimate such as single class method, simple random sampling method, compound ratio sampling method, separate ratio sampling method and average tree sampling method artificial forest pitch pine volume. The following results were realized by the ratio estimates. At the above table simple random sampling method and compound ratio sampling method are the only ones which is included the actual stand volume in the ratio estimatedstand volume. It is thought that the sampling was in a such good result was because of stand structual stands were simple forest. The most simple measurement and calcuation on the stand volume estimates, in order, would be (1) single class method, (2) simple random sampling method (3) average tree method (4) separate ratio sampling method and compound ratio sampling method, and at the planted evenaged forest the method has realized the best results in obtaining good accuracy and the measure stand volume with least time, expenses and labor in considerably.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.302-309
• /
• 2020

Early-detection and monitoring of toxic chemical gas cloud with chemical detector is essential for reducing the number of casualties. Conventional method for chemical detection and reconnaissance has the limitation in approaching to chemically contaminated site and prompt understanding for the situation. Stand-off detector can detect and identify the chemical gas at a long distance but it cannot know exact distance and position. Chemical detection UAV is an emerging platform for its high mobility and operation safety. In this study, we have conducted chemical gas cloud detection with the stand-off chemical detector and the chemical detection UAV. DMMP vapor was generated in the area where the cloud can be detected through the field of view(FOV) of stand-off chemical detector. Monitoring the vapor cloud with standoff detector, the chemical detection UAV moved back and forth at the area DMMP vapor being generated to detect the chemical contamination. The hybrid detection system with standoff cloud detection and point detection by chemical sensors with UAV seems to be very efficient as a new concept of chemical detection.

• Journal of Convergence for Information Technology
• /
• v.10 no.3
• /
• pp.16-21
• /
• 2020

This paper describes the jamming characteristics of a stand-off jammer jamming the LPI radar. The LPI radar reduces the side lobes of the receiving antenna to reduce the effect of jamming. It is easy a radar to predict the effect of jamming on a self-protection jammer where the jammer is in the same position as the target. However, for stand-off jammer jamming at different locations from the target, the prediction of jamming effect is complex. In this paper, the jamming effect of LPI radar is analyzed using signal to jamming ratio and burn-through range. Also, when the antenna's side lobe decreases below -30 dB, the stand-off jamming effect in the side lobe direction is weak. So we proposed a new jamming method for the main lobe and analyzed the jamming effect. This study is expected to be useful for the design and operation of aircraft jammers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.975-983
• /
• 2009

This paper presents the work being carried out in order to deduce hover performance of a small-scale single rotor blade as a preliminary study of a small coaxial rotor helicopter development. As an initial research, a test stand capable of measuring thrust and torque of a small-scale rotor blade in hover state was constructed and fabricated. The test stand consists of three parts; a rotating device, a load measuring sensor and a data acquisition system. Thrust and torque were measured with varying collective pitch angle at fixed RPM. Through this research, hover performance tests were conducted for a small-scale single rotor blade operating in low Reynolds number ($Re\;{\approx}3{\times}10^5$), as well as for verifying the test stand itself for acquiring hover performance.

• The Journal of Korean Physical Therapy
• /
• v.23 no.1
• /
• pp.1-5
• /
• 2011

Purpose: The purpose of this study was to investigate changes in muscle activation associated with foot position during a sit-to-stand exercise among normally healthy elderly subjects. Methods: Eight subjects (male=3; female=5; mean age=$70.13{\pm}{\pm}2.53$years) were recruited.The activation of six muscles (neck extensor; lumbar extensor; hamstring; rectus femoris; gastrocnemius; tibialis anterior) was measured by surface EMG (TeleMyo 2400T G2, Noraxon Inc., USA) during a sit-to-stand protocol under three different foot positions (ankle dorsiflexion of 0, 15, or 30 degrees). Results: Muscle activation of the neck extensor and hamstring was decreased according to the change in foot position (p<0.05), but activation of the rectus femoris was increased (p<0.05). Muscle activation of the neck extensor was significantly different between 0 and 15 degrees (p<0.05). Muscle activation of the hamstring was significantly different between 0 and 15 degrees and between 0 and 30 degrees (p<0.05). Muscle activation of the rectus femoris was significantly different between 0 and 30 degrees and between 15 and 30 degrees (p<0.05). However, activation of lumbar extensor, gastrocnemius and tibialis anterior muscles did not significantly differ between foot positions. Conclusion: These findings suggest that muscle activation during a sit-to-stand movement differs depending on foot position. We believe that these differences should be considered when educating the elderly regarding proper body movements.

• The Journal of Korean Physical Therapy
• /
• v.26 no.6
• /
• pp.449-452
• /
• 2014

Purpose: The purpose of this study was to analyze the coordination between trunk flexion and lower limb extension contributing to vertical propulsion during sit-to-stand (STS) at different chair heights in the elderly. Methods: Ten elderly subjects were asked to stand up at their natural speed from different chair heights : (1) $90^{\circ}$ knee flexion; (2) $100^{\circ}$ knee flexion; (3) $110^{\circ}$ knee flexion; and (4) $120^{\circ}$ knee flexion. A standard chair without a backrest or armrests was used in this study. To remove inertial effects of upper limb movements, subjects were asked to stand up from a chair with their arms crossed at the chest. Mean of results of three trials were used in the analysis at different knee flexion angles. Distances moved by the shoulder for compensatory trunk movement was recorded by motion analysis and vertical force was recorded under foot using force plates. Distances moved by the shoulder and vertical ground reaction force measurements were analyzed using repeated ANOVA. Results: Distances moved by the shoulder significantly decreased with higher chair (p<0.05). Vertical forces were not significant difference on chair heights (p>0.05), but results of pairwise comparisons for vertical force revealed significant difference between $90^{\circ}$ knee flexion and $120^{\circ}$ knee flexion (p<0.05). Conclusion: Trunk movement is probably used as a compensatory mechanism at low chair heights to increase lift-off from sitting by the elderly.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.45-50
• /
• 2010

Soil characteristics by site types (slope, topography and stand) were analyzed to provide the basic information for sustainable management of Nari basin in Ulleung Island. The content of total N of Nari basin was lowest at the north slope, this site had also significantly low soil pH and content of available P. The result of soil pH and content of total N analysis by topography, ranged from 5.13 of summit to 5.59 of plain and from 0.63% of plain to 0.87% of hill, respectively. Soil pH, content of total N and available P by stand were significantly different, which showed that stand types are more significant in explaining the soil properties. Available P content by slope, topography and stand ranged from 2.79 to 8.46 ppm, 3.99 to 8.46 ppm and 5.03 to 11.59 ppm, respectively. It was concluded that forest soil around Nari basin has relatively low available P content compared to other forest soil.