• 한국산림과학회지
• /
• 제82권2호
• /
• pp.152-165
• /
• 1993

본(本) 연구(硏究)는 heat pulse법(法)을 이용하여 낙엽송 임분(林分)의 증산량(蒸散量)을 알기 위한 기초 연구로써, 일사량(日射量), 온도(溫度), 습도(濕度) 등의 변화에 따른 heat pulse 속도(速度)의 일변화와 계절변화, 방위별 heat pulse 속도(速度)의 차이, 변재부(邊材部)에 있어서 깊이별 heat pulse 속도(速度)의 차이, 우세목(優勢木), 준우세목(準優勢木), 열세목(劣勢木)의 heat pulse 속도(速度)의 차이, 엽(葉)의 수분(水分)포텐셜과 heat pulse 속도(速度)와의 관계, 줄기에 있어 수분상승의 방향, heat pulse법(法)으로 추산한 임분(林分)의 증산량(蒸散量)등에 대하여 측정 고찰하였다. 얻어진 결과를 요약하연 다음과 같다. 1 낙엽송의 heat pulse 속도(速度)(V)와 수액유속(樹液流速)(SFR)과의 관계는 SFR=1.37V($r=0.96^{**}$)의 식으로 나타냈다. 2. 우세목(優勢木), 준우세목(準優勢木), 열세목(劣勢木)의 heat pulse 속도(速度)를 비교하면, 수액유속(樹液流速)은 우세목(優勢木)이 가장 높고, 준우세목(準優勢木), 열세목(劣勢木) 순위였다. Heat pulse 속도(速度)는 일사량(日射量), 온도(溫度), 대기포차(大氣飽差) 등의 크기에 따라 심한 변화(變化)를 나타냈다. 3. 입목(立木) 개체간(個體間)의 heat pulse 속도(速度)의 차이는 이른 아침과 밤에는 거의 없으나, 일사량(日射量)이 높은 12시부터 16시 사이에는 약간의 차이를 나타냈다. 4. Heat pulse 속도(速度)와 수분(水分)포텐셜은 거의 비슷한 일변화 경향을 나타냈다. 5. Heat pulse 속도(速度)의 계절변화는 8월에 가장 높았고, 10월이 가장 낮았다. 그리고 6, 7, 9월의 heat pulse 속도(速度)는 거의 비슷한 값을 나타냈다. 6. 줄기에 있어 방위별 heat pulse 속도(速度)는 동측이 가장 높았고, 서측과 북측은 비슷한 속도를 나타냈으며, 남측의 속도가 가장 낮았다. 7. 변재부(邊材部)에 있어서 깊이별 heat pulse 속도(速度)의 차이는 수피(樹皮)로부터 2cm 깊이에서 가장 높고, 다음이 1cm 깊이, 그리고 3cm 깊이에서 가장 낮았다. 8. 줄기에 있어 수분이동방향(水分移動方向)은 5본 모두 오른쪽 나선상승(螺旋上昇)(spiral ascent turning right)을 나타내고 있었다. 특히 지상의 3m까지는 매우 느린 회선(回旋)을 나타내다가 그 이상의 수고(樹高)에서는 매우 빠른 회선(回旋)으로 상승됨을 알 수 있었다. 9. 수액유량(樹液流量)(SF)은 SF=1.37AV 식(式)으로 나타났고, 이 식으로 구한 수액유량(樹液流量)은 우세목(優勢木)이 준우세목(準優勢木)과 열세목(劣勢木)보다 현저히 높았다. 10. 1ha의 임분(林分)에 대한 1일의 증산량(蒸散量)의 구성비율(構成比率)은 낮이 83%, 밤이 17%였고, 증산량(蒸散量)은 약 30.8ton/ha/day이었다. 11. 1ha의 월별(月別) 증산량(蒸散量)은 8월이 1,194ton/ha/month로 가장 많았고, 5월이 386ton/ha/month로 가장 낮았다. 또 1ha의 연간(年間) 증산량(蒸散量)은 3,983ton/ha/yr이었다.

• 한국산림과학회지
• /
• 제102권4호
• /
• pp.543-549
• /
• 2013

경상남도 진주지역의 유사한 입지환경에서 생육한 평균 임령 35년생, 51년생, 62년생 곰솔임분을 대상으로 각 연령별 8본의 표본목을 벌채하여 바이오매스 추정을 위한 상대생장식과 줄기밀도 및 현존량 확장계수를 개발하였다. 흉고직경을 독립변수로 하고 각 부위별 건중량을 종속변수로 하는 상대생장식은 62년생 임분의 잎 바이오매스를 제외하고 유의성이 인정되었으며(P<0.05), 결정계수($R^2$)의 값도 0.55-0.98 정도로 나타났다. 또한 각 임분 연령에 대한 상대생장식(Age-specific allometric equations)의 회귀계수(slope)에 유의적인 차가 없어(P>0.05), 35년 이상 곰솔임분의 경우 임분 연령에 관계없이 일괄 상대생장식(Generalized allometric equations)을 이용하여 바이오매스 추정이 가능한 것으로 나타났다. 줄기밀도와 현존량 확장계수도 임분 연령 간 유의적인 차이가 없었으며 줄기밀도는 $0.45-0.51gcm^{-3}$, 현존량 확장계수는 1.32-1.38 정도의 범위에 분포하였다. 본 연구결과에 따르면 35년 이상 성숙한 곰솔임분의 바이오매스 추정을 위한 상대생장식, 줄기밀도, 현존량 확장계수는 임분 연령의 영향이 크지 않는 것으로 나타났다.

• 한국작물학회지
• /
• 제41권spc1호
• /
• pp.123-144
• /
• 1996

This review deals briefly with the various medicinal components(mainly saikosaponins), their biological activities and the variation of their contents by different cultivation environment and plant parts in Bupleurum species. Bupleuri radix, a crude drug, is the root of Bupleurum falcatum L. (Korea, Japan), B. chinense(China), and their related species (Umbelliferae). There are over 120 species in Bupleurum genus throughout world, mainly Asian area, and over 5 species in Korea, investigated up to now. These plants contain many physiological active compounds and the principal components are saikosaponins. Major activities of this crude drug and saikosaponins are the anti-inflammatory and antihepatotoxic activities. Saikosaponins and their derivatives in Bupleurum spp. have been chemically studied, isolated and identified over 70 compounds in over 50 species. Other components, physiologically active ones, also have been investigated, which are the groups of lignan, flavonoid, essential oil, polyacetylene, polysaccharide, etc. Saikosaponins belong to the group of triterpenoid saponin chemotaxonomically and occur the accumulation and turnover in plant tissues through secondary metabolism, mevalonic acid pathway. The contents and kinds of saikosaponins and other components in Bupleurum spp. plants are various due to different species and growing environments, as the plant growth characters and yield are various. Most of medicinal plants as well as Bupleurum species are very useful as agricultural products and traditional medicines, and also are very valuable as genetic resources and natural products. So we need to collect, evaluate, preserve, and utilize various medicinal plants, and also to under-stand secondary metabolism and improve the breeding and cultivation techniques for the safe production of crude drugs with high quality and yielding.

• Ocean and Polar Research
• /
• 제30권3호
• /
• pp.215-224
• /
• 2008

A piston core (MR06-04 PC23A) collected from the northern continental slope in the central Bering Sea has recorded the high-resolution millennial-scale variation of calcium carbonate ($CaCO3$) content during the last 65 kyr. An estimation of the age of the core sediments was carried out by using the lithologic correlation of the deglacial laminated layers with a neighboring core (HLY02023JPC), complementing the last appearance datum of both Lychnocanoma nipponica sakaii (54 kyr) and Amphimelissa setosa (85 kyr). The probable age of core MR06-04 PC23A was approximately younger than 65 kyr. Two distinct events of a significant increase of $CaCO3$ in the deglacial laminated sediments clearly correspond to MWP1A and MWP1B in the Bering Sea (Gorbarenko et al. 2005) and to T1ANP and T1BNP in the North Pacific (Gorbarenko 1996). These pronounced peaks of $CaCO3$ contents result from the elevated carbonate production in the surface water and the subsequent weakened dilution due to terrestrial input, along with an enhanced oxygen minimum zone. The $CaCO3$ contents are low (${\sim}2%$) during the last glacial period mainly because of a low carbonate production caused by an expanded sea-ice cover and an increased dilution by terrigenous particles due to their closer distance to the continent during the sea-level low stand. The occurrence of seven distinct $CaCO3$ peaks in core MR06-04 PC23A is remarkable during MIS 3 and MIS 4, and they most likely correlate to the short-term millennial Dansgaard-Oeschger events.

• 한국콘텐츠학회논문지
• /
• 제10권3호
• /
• pp.21-31
• /
• 2010

최근 변화되고 있는 건축설계 기술들 가운데 설계자들의 경험에 의존하고 있는 설계요소들의 설계 값 결정과정들을 논리적으로 접근할 수 있는 방안을 개발하려는 연구들이 있다. 이러한 연구들 중의 한 부분인 본 연구는 건물에너지 절약설계와 관련된 설계요소들 중에서 시간적 변화에 따라 설계 값들이 변화하는 특성을 가진 설계요소들을 대상으로 논리적으로 설계 값을 결정할 수 있는 모델 개발을 목적으로 진행하였다. 그 결과, 현실세계를 확률분포로 해석하여 문제를 해결하는 시뮬레이션 기법을 토대로 논리적으로 설계 값을 결정할 수 있는 결정 모델의 구조를 본 연구를 통해서 설정하였다. 이러한 결정 모델의 적용 가능성과 검정을 위해서 시간변수를 가진 설계요소들의 대표라 할 수 있는 실외 기후요소들을 대상으로 사례분석을 실시하였다.

• Safety and Health at Work
• /
• 제11권2호
• /
• pp.207-214
• /
• 2020

Background: Prolonged sitting at work can lead to adverse health outcomes. The health risk of office workers is an increasing concern for the society and industry, with prolonged sitting work becoming more prevalent. Objective: This study aimed to explore the variation in muscle activities during prolonged sitting work and found out when and how to take a break to mitigate the risk of muscle symptoms. Methods: A preliminary survey was conducted to find out the prevalence of muscle discomfort in sedentary work. Firstly, a 2-h sedentary computer work was designed based on the preliminary study to investigate the variation in muscle activities. Twenty-four participants took part in the electromyography (EMG) measurement study. The EMG variations in the trapezius muscle and latissimus dorsi were investigated. Then the intervention time was determined based on the EMG measurement study. Secondly, 48 participants were divided into six groups to compare the effectiveness of every break type (passive break, active break of changing their posture, and stand and stretch their body with 5 or 10 mins). Finally, data consisting of EMG amplitudes and spectra and subjective assessment of discomfort were analyzed. Results: In the EMG experiment, results from the joint analysis of the spectral and amplitude method showed muscle fatigue after about 40 mins of sedentary work. In the intervention experiment, the results showed that standing and stretching for 5 mins was the most effective break type, and this type of break could keep the muscles' state at a recovery level for about 30-45 mins. Conclusions: This study offers the possibility of being applied to office workers and provides preliminary data support and theoretical exploration for a follow-up early muscle fatigue detection system.

• 한국수자원학회논문집
• /
• 제37권9호
• /
• pp.737-744
• /
• 2004

본 연구에서는 산림식생에 따른 장기적인 측면에서의 유역 물수지 영향을 살펴보기 위하여 보청천 유역을 대상유역으로 선정하고, 준분포형 매개변수 모형인 SWAT 모형을 적용하여, 침엽수와 활엽수에 따른 증발산, 지표유출, 중간유출, 기저유출, 총 유출의 차이를 검토하였다. 먼저 SWAT 모형내 식생 생장 알고리즘을 수정하여 연중 일정한 엽면적지수를 갖는 국내 침엽수림의 생장 특성을 반영할 수 있도록 하였으며, 대상유역을 하나의 토지피복을 갖는 가상의 유역으로 설정한 후, 수정된 SWAT 모형을 적용하여 각 물수지 요소 변화를 모의한 결과, 침엽수가 활엽수에 비해 증발산 증가 및 유출 감소에 더 영향을 미치는 것으로 나타났다. 그러나, 보다 정량적인 규명과 유출모형의 불확실성을 보완하기 위해서는 수종 외에 수령, 식재밀도, 식재위치, 토양특성자료 등 다양한 조건이 충분히 고려되어야 할 것이다.

• 한국전문물리치료학회지
• /
• 제9권2호
• /
• pp.115-131
• /
• 2002

Functional electrical stimulation (FES) training of the knee extensors is a useful way to rehabilitate the ability to stand and walk. However, training using FES has not been able to solve the problem of fatigue; clinical application of FES quickly produces muscle fatigue, due to the continuous activation of the muscles of the lower extremity. Therefore, reduction of muscle fatigue is an important factor in increasing the effectiveness of FES training in paraplegia. Intermittent high frequency alternating stimulation is a method that combines the advantages of high frequency (leading to strong muscle contractions) and alternating stimulation (reducing muscle fatigue), thereby continuously strengthening muscles. It is not known whether low frequency simultaneous stimulation results in stronger muscle contraction than high frequency alternating stimulation. This study compared the effectiveness of high frequency alternating stimulation with low frequency synchronized stimulation. Muscle power using FES on the quadriceps of 20 normal subjects were compared. Intermittent high frequency alternating stimulation did not produce more powerful muscle contraction than intermittent low frequency synchronized stimulation, because the muscle characteristics differed individually. Significant individual variation according to muscle characteristics was founded when applying FES. Accordingly, when physical therapists use FES to treat patients, they must be aware of individual variation in muscle characteristics.

• 농업과학연구
• /
• 제39권4호
• /
• pp.477-482
• /
• 2012

Low-temperature germination is one of the major determinants for stable stand establishment in the rice direct seeding method in temperate regions and at high altitude areas. Quantitative trait loci (QTL) controlling low-temperature germinability in rice were identified using 96 introgression lines (ILs) derived from a cross between Oryza rufipogon and the Korean japonica cultivar, 'Hwaseongbyeo'. The germination rate at $15^{\circ}C$ was measured to represent low-temperature germination and used for QTL analysis. The germination rate at $15^{\circ}C$ for 7 days of Oryza rufipogon and Hwaseongbyeo was 93.3 and 28.7%, respectively, and that of progenies ranged from 0 to 48%. A linkage map was constructed using 135 simple sequence repeat (SSR) markers. Five putative QTLs associated with low-temperature germination were detected on chromosomes 1, 3, 4, 10 and 11. The QTL, qltg10 on chromosome 10 accounted for 19.2% of the total phenotypic variation for low-temperature germinability. Four additional QTL, accounted for 10.4 - 15.1% of the total phenotypic variation. The O. rufipogon alleles in all detected QTLs loci increased the low-temperature germination rate. No QTL associated with low temperature germinability has been detected near the qltg10 QTL in this study suggesting that qltg10 is a new QTL. The locus, qltg10 is of particular interest because of its independence from undesirable height and maturity effects. The DNA markers linked to the QTL for low temperature germinability would be useful in selecting lines with enhanced low temperature germinability in rice breeding program.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.723-730
• /
• 1998

With the introduction of edge drop control system in Tandem Cold Rolling Mill, it is necessary to develop te numerical expression for the set-up and edge drop automatic control of cold rolled sheet. As a first step we developed a simulation program which predicts profile and the amounts of edge drop at the delivery side of each stand by using roll deformation anlysis with the slit roll model. And by using the program the effect of various rolling conditions on edge drop was investigated. As a result the relations were obtained between the amounts of edge drop and rolling conditions. Based on above relations, the numerical expression was developed for the set-up and automatic control of edge drop by multi-regression of simulation results for the variation of edge drop amount with each rolling condition.