• Journal of Korean Society of Forest Science
• /
• v.97 no.2
• /
• pp.156-164
• /
• 2008

Recognizing the importance of the multi-purpose management of natural deciduous forest, this study was carried out to implement the partial cutting for stand regulation to examine agroforestry practice as well as other concurrent forest resource production, and to investigate the changes in stand characteristics and understory vegetation in a silvopasture practiced natural deciduous stand in the Research Forest of Kangwon National University, Korea. Three different partial cutting intensities (68.1%, 48.6%, and control) were performed in the unmanaged natural deciduous stand in order to improve the growing condition, especially light condition, for introducing some commercial herbaceous plants on the forest floor to establish agroforestry and/or silvopastoral system. Dominated by Quercus varibilis Blume (50.5%) and Quercus dentata Thum. ex Murray (42.6%), eight tree species were composed of the study forest, including poles of Pinus desiflora Siebold & Zucc and sapling of Pinus Koraiensis Siebold & Zucc. The total of 87 (13 tree species, 12 shrub species, 58 herbaceous species, and 4 woody climbers) vascular plant species were observed in study site after partial cutting treatments, while that of before partial cutting was 53 species (14 tree species, 8 shrubs species, 30 herbaceous species, and 1 woody climbers). The proportion of life form spectra in plot B was Mi (28.4%)-Na (23.0%)-Ge (17.5%)-Ch (10.8%)-He (9.5%)-MM (6.7%)-Th (4.1%). No statistically significant differences were observed in changes of life form spectra from before to after partial cutting treatment and among partial cutting gradients in this study. Partial cutting and scratching for forage sowing made plants invade easily on the forest floor, and light partial cutting (LPC) plot (500 stems/ha) had much higher number of undersory species than those of heavy partial cutting (HPC) plot (310 stems/ha) and control plot (1,270 stems/ha).

• Journal of Korean Society for Quality Management
• /
• v.10 no.2
• /
• pp.2-9
• /
• 1982

In principle the methods of increasing the reliability of complex system can be classified into the following four basic methods: (1) using the stand-by redundancy; (2) decreasing the failure rate of the system; (3) decreasing the time of continuous operation; (4) decreasing the mean repair time. Among the above four methods, it is generally known that the method of stand-by redundancy is the most effective general, to increase the reliability of systems. Therefor this paper aims to compare the gain in reliability which is achieved by applying stand-by redundancy with other methods, and to show the characteristics of each method From the comparison of the methods of increasing reliability, the following important facts are found: When the method of stand-by redundancy is used to increase the reliability of complex systems intended for long-term operation, a hight multiplicity of stand-by redundancy is required. Thus an increase of the reliability of complex system by applying stand-by redandancy is realized at the expense of characteristics such as weight, size, cost, increased complexity of operation conditions. And this property restricts its use in systems which are critical with respect to weight, size, cost or operation conditions. The method of stand-by redundancy is the most effective when this method is used to increase the reliability of complex systems intended for short-term operation, and the method of decreasing failure rate is the most effective when it is used to increase the reliability of systems intended for long-term use. The methods of increasing reliability discussed in this paper make it possible to make highly reliable systems. But it is not possible to make a highly reliable system using a single method of increasing reliability, even if it is the most effective one. Therefore it is recommended to use all or a majority of the above four methods by choosing it in accordance with the properties of the system under construction.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.83-90
• /
• 2012

This study was undertaken to analyze 1) the growth characteristics for the optimal planting density and 2) reached ages of sap tapping for the planting timing of Acer okamotoanum in natural and plantation stand. Soil in natural stand was significantly more fertile than that of plantation stand. Early growth of A. okamotoanum in plantation stand was affected by planting density. Results showed that there was a positive relationship between the DBH and crown width in both natural and plantation stands. Reached ages by DBH were no significant difference in natural stands. Reached ages on DBH 10 cm were approximately 19 and 9 in natural and plantation stands, respectively.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.4
• /
• pp.45-52
• /
• 2022

PURPOSE: This study examined the center of pressure (COP) and ground reaction force (GRF) characteristics during each task-oriented sit-to-stand in stroke patients. METHODS: Twenty stroke subjects were included in this study. The task consisted of sit-to-stand (SS), sit-to-stand for reaching (SR), and sit-to-stand for walking (SW). The response time, COP, and GRF were measured during each task. The COP and GRF data were obtained using a two-force plate. The force plates were placed on a chair (below the buttock) and floor (below the feet). RESULTS: Significant differences were observed between SS (1.48 ± .48 s) and SR (2.09 ± 0.82 s) and between SS and SW (2.27 ± .72 s) in the preparatory phase time during each sit-to-stand exercise (p = .002) and showed significant differences between SS (13.90 ± 6.44 cm) and SW (34.62 ± 39.38 cm) and between SR (16.14 ± 8.04 cm) and SW in the mediolateral COP range during each sit-to-stand exercise (p = .013). CONCLUSION: These findings suggest that more complex task-oriented sit-to-stand exercise requires a high-level motor programming process than a simple sit-to-stand task. Therefore, a variety of tasks-oriented sit-to-stand exercises will be useful training to achieve better ADL ability for stroke patients.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.29-60
• /
• 2004

Recently stand-by credits are using as surety devices in various global business transactions including sale of goods. Stand-by credits have lots of merits but simultaneously have high possibility of improper demand by the beneficiary due to the characteristics of the documents required. So so-called fraud rule has developed as a solution to the improper demand in letter of credit transactions. And the actual way of the fraud rule is the injunction by the competent court. The purpose of this article is to examine the applicability of the injunction in stand-by credit transactions by means of case studies. For this purpose, the author examined the concept of the injunction, necessity of the injunction in stand-by credit transactions and the cases of injunction granted and injunction denied. Firstly, the courts have legal standard of the application of injunction due to the legislation of the relative articles in the United Nations Convention on Independent Guarantees and Stand-by Letters of Credit and the Uniform Commercial Code. Secondly, the courts have taken a negative attitude granting injunction in order to observe the independence principle. Thirdly, the courts have a tendency to grant injunction when the demand has no conceivable basis and the applicant will suffer irreparable injury without injunction. Finally, like the saying 'prevention is the best cure', the applicant always pays attention with reasonable care before improper demand by the beneficiary.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1640-1642
• /
• 2000

We were fabricated of NiCr thin film resitors(TFR) on $Al_{2}O_3$ substrates by dc magnetic sputtering, system. The characteristics of electrical resistance by substrates & annealing condition on the resistors were studied by X-ray Diff. and SEM, ESCA.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.129-135
• /
• 2019

This paper is part of research and development for stand-alone solar system without commercial power supply. It implements firmware of controller for operation of stand-alone solar system by applying IoT technology and also develops communication modules that allow multiple solar lamps to send and receive data through wireless network. The controller of the developed stand-alone solar system can effectively charge the power generated by the solar module, taking into account the battery's charge and discharge characteristics. It also has the advantage of attaching wireless communication modules to solar lamp posts to establish wireless communication networks without incurring communication costs. In addition, by establishing IoT gateway middleware platform for each installation site, it forms a foundation to operate multiple solar lamp posts into multiple clusters. And, it is expected that the data collected in each cluster will be used to enable configuration and control of operational information, thereby inducing convenience and efficiency of remote operation and management.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.875-876
• /
• 2012

• Journal of Forest and Environmental Science
• /
• v.35 no.3
• /
• pp.197-204
• /
• 2019

A tree-length harvesting system using the HAM300, which is mounted on a farm tractor prototype machine, have been recently introduced in South Korea for thinning old (>30 years) forests. However, no research has previously been conducted on the characteristics of residual stand damage associated with cable yarding systems on thinning treatment stands in South Korea. Therefore, there were assessed on the degree and quantity of residual stand damage caused by felling and yarding process to broaden the knowledge of residual stand damage on semi-mechanized skyline thinning operations. This study investigated scar size, direction, area, shape type and their distribution on the residual stand damage caused by felling and yarding operations. Damage to residual trees was generated for 7.4% and 6.9% of residual trees in felling and yarding operations, respectively. Damaged direction of scars was located in front-side (38.9%) and up-side (34.7%) for felling operations while the highest scar damage was found on down-side (44.6%) for yarding operations. Scar heights of felling damage were higher than those of yarding damage. In yarding operation, the most of the scars was located within l0m from the center of the skyline corridor. These results should be useful information for forest managers and landowners to reduce residual stand damages and retain valuable timber volume from thinning treatments.