• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.294-299
• /
• 2004

An assessment of a novel laser-electric hybrid propulsion system was conducted, in which a laser-induced plasma was induced through laser beam irradiation onto a solid target and accelerated by electrical means instead of direct acceleration only by using a laser beam. A fundamental study of newly developed rectangular laser-assisted pulsed-plasma thruster (PPT) was conducted. On discharge characteristics and thrust performances with increased peak current compared to our previous study to increase effects of electromagnetic forces on plasma acceleration. Maximum peak current increased for our early study by increasing electromagnetic effects in a laser assisted PPT. At 8.65 J discharge energy, the maximum current reached about 8000 A. Plasma behaviors emitted from a thruster in various cases were observed with an ICCD camera. It was shown that the plasma behaviors were almost identical between low and high voltage cases in initial several hundred nanoseconds, however, plasma emission with longer duration was observed in higher voltage cases. Canted current sheet structures were also observed in the higher voltage cases using a larger capacitor. With a newly developed torsion-balance type thrust stand, thrust performances of laser assisted PPT could be estimated. The impulse bit and specific impulse linearly increased. On the other hand, coupling coefficient and the thrust efficiency did not increase linearly. The coupling coefficient decreased with energy showing maximum value (20.8 ？Nsec/J) at 0 J, or in a pure laser ablation cases. Thrust efficiency first decreased with energy from 0 to 1.4 J and then increased linearly with energy from 1.4 J to 8.6 J. At 8.65 J operation, impulse bit of 38.1 ？Nsec, specific impulse of 3791 sec, thrust efficiency of 8 %, and coupling coefficient of 4.3 ？Nsec/J were obtained.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.47-58
• /
• 2011

The forest of Korea had been severely degraded since early 1900s until 1950s. Korean Government has successfully accomplished the reforestation works since 1960s. However, some plantations showed poor survival and growth caused by ignoring site characteristics in selecting plantation species and lack of tending works such as thinning. The natural regeneration of indigenous species, such as Quercus species and Pinus densiflora Siebold & Zucc., were examined in the plantations of Pinus koraiensis Siebold & Zucc. and Larix kaempferi Fortune ex Gordon. Quercus species regenerated mainly by sprouting while P. densiflora regenerated naturally from a few mother trees that remained in the plantations. P. koraiensis showed poor survival ($IVI{\leq}25%$) and suppressed growth (height ${\leq}3m$ and $DBH{\leq}3cm$ at 20 year-old) by Quercus species or P. densiflora in the plantation areas, however had high survival ($IVI{\geq}70%$) and growth (8 m height and 14.1 cm DBH at 20 year-old) in areas where silvicultural practices were conducted. L. kaempferi showed good survival ($IVI{\geq}40%$) and growth (17.2 m height and 16.3 cm DBH at 30 year-old) mostly in valley areas, while it was nearly dead ($IVI{\leq}10%$) in ridge or ridge-slope areas and was replaced by indigenous species such as Quercus species ($IVI{\geq}25{\sim}55%$) or P. densiflora ($IVI{\geq}18{\sim}50%$).

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4122-4129
• /
• 2021

The counting efficiencies obtained using anthropomorphic physical phantoms are generally used in whole-body counting measurements to determine the level of internal contamination in the body. Geometrical discrepancies between phantoms and measured individuals affect the counting efficiency, and thus, considering individual physical characteristics is crucial to improve the accuracy of activity estimates. In the present study, the counting efficiencies of whole-body counting measurements were calculated considering individual physical characteristics by employing Monte Carlo simulation for calibration. The NaI(Tl)-based stand-up and HPGe-based bed type commercial whole-body counters were used for calculating the counting efficiencies. The counting efficiencies were obtained from 19 computational phantoms representing various shapes and sizes of the measured individuals. The discrepancies in the counting efficiencies obtained using the computational and physical phantoms range from 2% to 33%, and the results indicate that the counting efficiency depends on the size of the measured individual. Taking into account the body size, the equations for estimating the counting efficiencies were derived from the relationship between the counting efficiencies and the body-build index of the subject. These equations can aid in minimizing the size dependency of the counting efficiency and provide more accurate measurements of internal contamination in whole-body counting measurements.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.4
• /
• pp.426-432
• /
• 2006

This study was conducted to investigate the changes in quality characteristics of frozen maesil according to thawing methods. The quality of maesil thawed in microwave oven was superior to those thaw in refrigerating temperature(5 $^{\circ}$) and in room temperature(25 $^{\circ}$). Drip loss of maesil thawed in microwave oven was 3.2${\pm}$0.2%. The total content of free sugars of maesil was 426.6 mg%, and 3% of them was decreased during thawing in microwave oven. The total content of organic acids was 5,297.2 mg%, and 2.5% of them was decreased during thawing in microwave oven. The total content of free amino acids was 281.4 mg%, and 2.1% of them was decreased during thawing in microwave oven. The principle ingredients of frozen maesil was stand for the lost contents of free sugar and a content loss of free organic acid and free amino acid were the fewest by thawing. Antioxidant effect for soybean oil and linoleic acid of maesil extract were expressd POV and TBA values. Antioxidative activity of fresh maesil extract was highest followed by maesil thawed in microwave oven, thawed in refreezing temperature (5$^{\circ}$)and room temperature (25$^{\circ}$)

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.5
• /
• pp.405-412
• /
• 1993

This experiment was conducted to investigate the effects of water depths on seedling stand and early growth of califonia rice varieties, S201, M202, A301, Italico livorno and Korean variety, Hwaseongbyeo, and barnyardgrass (Echinochloa crus-galli) The coleoptile length of rice was longer with deep water depth while for the radicle length shorten. As water depth was increased, the percentage of seedling stand were decreased slightly in rice, while sharply increased in barnyardgrass. Plant height of rice with increasing water depth were longer, whereas that of barnyardgrass reduced significantly with weaker. Tiller number of rice and barnyardgrass were significantly reduced as water depth increased. Dry matter weight and healthy score of rice seedling at 35DAS were highest in 7.5cm water depth followed saturated moisture, 15, and 22.5cm water depth, while for barnyardgrass those were especially negatively affected by deep water depth. These results showed that the seedling stand and early growth of barnyardgrass was highly suppressed by deeper water levels compared with rice. Rice cultivars which are showes growth characteristics in deeper water levels at early growth stage were Italico livorno and S201 in Japonica / Indica.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.488-495
• /
• 2005

This study was conducted to understand the influences of forest structure on throughfall, stemflow and interception loss. The study plots included the natural old-growth deciduous, Pinus koraiensis and Abies holophylla forests in Gwangneung and the rehabilitated young mixed forest in Yangju, Gyeonggido. The Pinus koraiensis and Abies hotophylla had been planted in 1976. The rehabilitated young mixed forest had been established to control erosion in 1974. Total and net rainfall were monitored from March, 2003 to October, 2004. Tipping bucket rain gauge recorded total rainfall. Throughfall and stemflow were measured by custom-made tipping bucket and CR10X data logger at each $10m{\times}10m$ plots at intervals of 30 minutes. Interception loss in the Pinus koraiensis plot were most as 37.2% of total rainfall and least as 22.6% in the rehabilitated young mixed forest. Stemflow in the rehabilitated young mixed forest was 10.7% of total rainfall and stemflow in the Pinus koraiensis plot was 2.4%. The average throughfall ratio ranged from 66% to 77% depending on the canopy coverage. The relationship of stemflow and total rainfall represented in a linear regression equation though the variation of data was large. The ratio of stemflow-conversion was 2% of total rainfall in the Pinus koraiensis plot and 12% in the rehabilitated young mixed forest, respectively. The stem storage of the natural old-growth deciduous was the largest of 0.21 mm whereas that of the Pinus koraiensis plot was the least of 0.003 mm. A deciduous forest produced stemflow more than a coniferous forest due to a smooth bark and steeply angled branches. Interception loss of all study plots increased linearly as total rainfall increased. The distribution of interception loss data related in total rainfall became wider in a deciduous forest than a coniferous. It resulted from seasonality of leaf area index in a deciduous forest. As considered above results, it was confirmed that there were great differences of throughfall, stemflow and interception loss depending on forest stand structures. The simulation model for predicting interception loss must have parameters such as forest stand characteristics and LAI in order to describe the influence of forest structure on interception loss.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.344-350
• /
• 2018

This study was carried out to improve the forest management method considering the use of high value added timber in the natural broadleaf forests. For this purpose, the criteria for evaluating the quality grade of standing trees were established and applied to the oak stand in the central region of Korea. The evaluation factors of the grade were bending of stem, branch, stem damage, and other defects. If the logs are divided into 2.1 m units and three logs up to 6.3 m are available, they are classified as Grade I (G-I). If two logs are available, they are classified as Grade II (G-II), If only one log is available, it is classified as Grade III (G-III). When any log is not available as timber, it is classified as Grade IV (G-IV). As a result of applying the grade to the oak stand, G-I was 6.7 %, G-II was 28.0 %, G-III was 38.3 %, and G-IV was 27.0 %. The ratio of standing trees by oak species of higher than G-III was 88.2 % for Quercus acutissima, 88.1 % for Q. variabilis, 83.5 % for Q. serrata, 56.3 % for Q. aliena, and 50.3 % for Q. mongolica, respectively. The G-IV ratio for Q. variabilis and Q. mongolica tended to decrease with increasing diameter at breast height. The order of major defect affecting the grading level was bending of stem > branch > stem damage > other defects. Considering the grade level and oak species distribution, it was concluded possible to produce high quality hardwood timber when we concentrate forest tending techniques on Q. acutissima and Q. variabilis stand. In order to improve the accuracy of grading, it is necessary to continuous complement through the monitoring research for evaluation factors.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.125-135
• /
• 2022

In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr^-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr^-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr^-1 at age 23, whereas that for all trees was 0.49 m·yr^-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.1
• /
• pp.83-88
• /
• 2014

This research was carried out to determine the characteristics of germination in relation to temperature, and seedling emergence and growth affected by soil moisture in forage millet. The seeds of forage millet could germinate at more than $15^{\circ}C$ at the rate of 0, 90.5, 97.3 and 96.8% respectively 10 days after seeding at 10, 15, 20 and $25^{\circ}C$. The result showed that the temperature needs to be $15^{\circ}C$ or more for the seeds to germinate. The effects of seeding depth on the growth characteristics and emergence of millet seed were investigated in waters and direct seeding methods by thoroughly mixing the seed and soil. In water treatment, the emergence rates were 3.7% at $15^{\circ}C$, 7.6% at $20^{\circ}C$, 6.3% at $25^{\circ}C$, while direct seeding treatment showed the emergence rates of 65.6, 75 and 71% at 15, 20 and $25^{\circ}C$, respectively. At 15, 20, and $25^{\circ}C$, seeds in water seeding could germinate at 0.5, 1.8, 1.5 cm of soil depth, while in direct seeding, they could germinate at the depth of 9.5, 10.0, 9.9 cm. When the initial growth characteristics of the seeds were investigated, there was positive correlation between seeding depth and mesocotyl length in both water and direct seed methods. Growth and development in terms of leaf age, root length, coleoptiles and mesocotyl length, and plant height were found maximum at 0.5 cm soil depth for water seeding, and 3-5 cm soil depth for direct seeding. Results showed that there were close relationship among temperature, soil depth and moisture acquiring methods, and the combination of these factors greatly affected the initial growth characteristics and development of millet seeds. It can be concluded that, to get good seedling stand and germination of millet seed, millet should grown in field condition at the depth of 0.5 cm or less for water seeding, and 3-5 cm for direct seeding method.

• Journal of Korean society of Dental Hygiene
• /
• v.2 no.1
• /
• pp.97-113
• /
• 2002

This research is an attempt to establish a basic material in discovering the subjective types of the dental coordinators occupational consciousness, utilizing the Q-Method Theory, which is capable of measuring the subjective nature of human being by scientific and systematic method. The characteristics of each type were analyzed so as to have the dental coordinator to possess the desirable understanding of the occupational view together for them to have self-confidence as a lifetime specialty occupation. Upon completion of the study, it was found that there are three types of subjective views pertaining to the occupational consciousness on the dental coordinator. The result on the analysis of the characteristics is as follows : Type 1 is the Taking Serious View on the Patient Service, which priority is placed on kindness and looking after any difficulties of the patient, namely, it is the type that puts the importance on the high level medical examination and treatment based on good service. Because of the kind service to the patient, those under this category considered their job satisfaction have been improved. It goes without saying that they were developing the services, which satisfy themselves, and it was confirmed that they thought that they should make things smooth for any development of problems that may arise between the patient and the dentist. Type 2 is the Taking Serious View on Career and Organizational Strength. This is a type that aims on the systematic nature of the internal job, namely, organizational strength itself viewed from the stand point thai either self-confident or work merit is proportional to experience. This type is to actively treat the problem and endeavor to solve the issue when dissatisfaction is held by the dental hospital system, which is either followed according to the work responsibility or by an organization having an appropriate system on remuneration, Type 3 is the Placing of Importance on the Overall Circumstances. This is the type that places importance on the overall now of the dental hospital, and it is the type, that most greatly recognizes the importance of the role of the dental coordinator. The dental coordinator should provide the sense of reliability to both the dentist and to the staff of the medical examination and treatment and should be able to adjust smoothly the overall now of the medical treatment. The dental coordinator is expected to be a medical service specialist, who is capable to solve the problems of the staff of the medical treatment intuitively and to adjust the relation between the employees. With the above result, it was found that although there was no mutual exclusiveness between the respective types, there are particular characteristics among each type. Therefore, this research has discovered and analyzed the subjective view types relative to the occupational consciousness of the dental coordinator for the proper understanding on the characteristics of each type to enable the dental sanitary students and the graduates of the Dental Sanitary Department, who are aspiring to become dental coordinator, as the basic guide material to be actively utilized.