• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2245-2266
• /
• 2016

The hop count routing metric is widely used in routing protocols of Wireless Sensor Networks (WSNs) due to its simplicity and effectiveness. With a lower hop count route, fewer transmissions are required to send a packet from the source to the destination. This can improve the throughput of a network because fewer transmissions results in less channel contention and interference. Despite this, the hop count routing metric may not be ideal for mobile scenarios where the topology of a network changes constantly and rapidly. In this paper, we propose to increase route stability in mobile WSNs by discovering paths that are more stable during route discoveries using routing metrics. Two routing metrics were proposed, the true beauty of these routing metrics lies in the fact that they can even be used even without specialized hardware such as GPS and other sensors. We implemented the proposed routing metrics in the AODV routing protocol and found that they are highly effective and outperform other stability-based routing metrics and the hop count routing metric.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1561-1567
• /
• 2015

Nodes of Mobile ad-hoc network usually use the energy-limited battery. Balanced energy consumptionis important to maintain path's stability. In this paper, we focus on improving the stability of the routing path in mobile ad-hoc networks. For that purpose, we propose a new routing protocol to find the highest minimum node residual energy path among shortest paths. The largest path of minimum value of the remain energy has a longer life than other paths to improve the reliability to data-transmission. Using ns-3 simulator, we show that the proposed routing protocol can provide more long-life stable routing path than AODV and EA-AODV.

• Smart Media Journal
• /
• v.11 no.5
• /
• pp.82-90
• /
• 2022

Along with the growing popularity of 5G technology, providing flexible and personalized network services suitable for requirements of customers has also become a lucrative venture and business key for network service providers. Therefore, dynamic network provisioning is needed to help network service providers. Moreover, increasing user demand for network services meets specific requirements of users, including location, usage duration, and QoS. In this paper, a routing algorithm, which makes routing decisions using Reinforcement Learning (RL) based on the information about link stability, is proposed and called Link Stability aware Reinforcement Learning (LSRL) routing. To evaluate this algorithm, several mininet-based experiments with various network settings were conducted. As a result, it was observed that the proposed method accepts more requests through the evaluation than the past link annotated shorted path algorithm and it was demonstrated that the proposed approach is an appealing solution for dynamic network provisioning routing.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.137-144
• /
• 2022

Wireless community networks (WCNs) are considered another form of ownership of internet protocol (IP) networks, where community members manage and own every piece of equipment in a decentralized way, and routing for traffic is done in a cooperative manner. However, the current routing protocols for WCNs suffer from stability and scalability issues. In this paper, an enhanced routing protocol is proposed based on the optimized link state routing (OLSR) protocol to meet the standards of efficiency in terms of stability and scalability. The proposed routing protocol is enhanced through two phases: multicasting expansion and multipoint relay (MPR) selection based on an analytical hierarchical process (AHP). The experimental results demonstrate that the proposed routing protocol outperforms the OLSR protocol in terms of network control overhead and packet delivery ratio by 18% and 1% respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.270-286
• /
• 2012

In this paper, we propose a novel routing protocol called the Cartography Enhanced OLSR (CE-OLSR) for multi hop mobile ad hoc networks (multi hop MANETs). CE-OLSR is based on an efficient cartography gathering scheme and a stability routing approach. The cartography gathering scheme is non intrusive and uses the exact OLSR reduced signaling traffic, but in a more elegant and efficient way to improve responsiveness to the network dynamics. This cartography is a much richer and accurate view than the mere network topology gathered and used by OLSR. The stability routing approach uses a reduced view of the collected cartography that only includes links not exceeding a certain distance threshold and do not cross obstacles. In urban environments, IEEE 802.11 radio signals undergo severe radio shadowing and fading effects and may be completely obstructed by obstacles such as buildings. Extensive simulations are conducted to study the performances of CE-OLSR and compare them with those of OLSR. We show that CE-OLSR greatly outperforms OLSR in delivering a high percentage of route validity, a much higher throughput and a much lower average delay. In particular the extremely low average delay exacerbated by CE-OLSR makes it a viable candidate for the transport of real time data traffic in multi hop MANETs.

• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.602-611
• /
• 2011

The inter-domain routing scalability issue is a major challenge facing the Internet. Recent wide deployments of multihoming and traffic engineering urge for solutions to this issue. So far, tunnel-based proposals and compact routing schemes have been suggested. An implicit assumption in the routing community is that structured address labels are crucial for routing scalability. This paper first systematically examines the properties of identifiers and address labels and their functional differences. It develops a simple Internet routing model and shows that a binary relation T defined on the address label set A determines the cardinality of the compact label set L. Furthermore, it is shown that routing schemes based on flat address labels are not scalable. This implies that routing scalability and routing stability are inherently related and must be considered together when a routing scheme is evaluated. Furthermore, a metric is defined to measure the efficiency of the address label coding. Simulations show that given a 3000-autonomous system (AS) topology, the required length of address labels in compact routing schemes is only 9.12 bits while the required length is 10.64 bits for the Internet protocol (IP) upper bound case. Simulations also show that the ${\alpha}$ values of the compact routing and IP routing schemes are 0.80 and 0.95, respectively, for a 3000-AS topology. This indicates that a compact routing scheme with necessary routing stability is desirable. It is also seen that using provider allocated IP addresses in multihomed stub ASs does not significantly reduce the global routing size of an IP routing system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.652-659
• /
• 2006

The routing algorithm is one of the key research areas in ad hoc networks. The most of existing routing algorithms depends on current availability of wireless link when finding the feasible path. Dependence on current information may mislead to a fragile communication path. Some routing approaches that take statistical average on received signal power enhance the possibility to find the most stable path, but have limitation on considering only the average power level. In this paper, we propose routing algorithm based on link stability for ad hoc network. The proposed algorithm not only takes statistical average, but also traces the degree of variations in received signal power. The simulation result support that the proposed algorithm is more likely to find the most stable path under the severe communication environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4411-4431
• /
• 2014

Mobile ad hoc networks (MANETs) have recently gained increased interest due to the widespread use of smart mobile devices. Group communication applications, serving for better cooperation between subsets of business members, become more significant in the context of MANETs. Multicast routing mechanisms are very useful communication techniques for such group-oriented applications. This paper deals with multicast routing problems in terms of stability and scalability, using the concept of stable core. We propose LMRSC (Lightweight Multicast Routing Based on Stable Core), a lightweight multicast routing technique for MANETs, in order to avoid periodic flooding of the source messages throughout the network, and to increase the duration of multicast routes. LMRSC establishes and maintains mesh architecture for each multicast group member by dividing the network into several zones, where each zone elects the most stable node as its core. Node residual energy and node velocity are used to calculate the node stability factor. The proposed algorithm is simulated by using NS-2 simulation, and is compared with other multicast routing mechanisms: ODMRP and PUMA. Packet delivery ratio, multicast route lifetime, and control packet overhead are used as performance metrics. These metrics are measured by gradual increase of the node mobility, the number of sources, the group size and the number of groups. The simulation performance results indicate that the proposed algorithm outperforms other mechanisms in terms of routes stability and network density.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.745-752
• /
• 2005

BGP is a unique routing protocol in broadband internet. It chooses routing paths considering internet hierarchy and local policies. As BGP routers selectively bypass routing information to a subset of neighboring BGP routers, connectivity by way of a series of links between source and destination nodes does not mean reachability of routing information of the two. In emergency when BGP routers or links over wide range are not available, BGP routers have to use links that are not normally used to keep reachability. This paper listed out the requirements for BGP backup routing and proposed a routing solution that hides most demerits in currently published ones. The proposed backup operates in three tiers according to network damage. Under this rule, BGP routers use tier-0 routing paths at normal. If networks are impaired, they choose tier-1 paths. If networks are seriously damaged, tier-2 paths are allowed to use. Also this paper proves that the proposed backup guarantees stability and safeness. As results, the proposed backup is very adaptive to light network damages as well as serious ones and provides strong routing reachability at all times.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.87-93
• /
• 2016

In this paper, we propose a RF energy harvesting based routing protocol in mobile ad-hoc wireless sensor networks. The main features and contributions of the proposed routing protocol are as follows. First, establishment of routing route based on both remaining energy of mobile sensor nodes and RF energy harvesting. Second, establishment of routing route by considering availability and stability of route based on energy of mobile sensor nodes to increase lifetime of networks and route. The performance evaluation of the proposed routing protocol using OPNET shows that the routing method considering both route availability and route stability based on RF energy harvesting can increase efficiently route lifetime.