• 제목/요약/키워드: stability of the cavern

검색결과 53건 처리시간 0.024초

공동 규모와 절리 방향성이 지하공동의 거동에 미치는 영향에 대한 연구 (A Study on the Influence of Behavior of Underground Cavern to Cavern Size and Joint Orientation)

  • 김상환;신범석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권1호
    • /
    • pp.84-92
    • /
    • 2010
  • 본 논문은 지하공동의 굴착시 중요한 영향을 미치는 인자인 공동 규모와 절리 방향성이 지하공동의 거동에 미치는 영향을 파악하기 위해 연구를 실시하였다. 연구를 수행하기 위해 공동 규모와 절리 방향성에 따른 8가지 Case를 선정하여 수치해석을 실시하고 축소모형실험을 통해 검증하였다. 이를 통해 2가지 인자에 따른 응력양상을 정량적으로 평가하였다. 본 연구의 연구결과 공동 규모가 커질수록 천단부의 수직응력 및 좌 우측부의 수평응력은 증가하였다. 또한, 절리 방향성에 따른 공동의 응력양상은 절리면을 따라 미끄러짐이 발생하여 응력변화에 큰 영향을 미치는 것을 확인하였다. 이러한 결과에 따라 연구가 지하공동의 안정성 평가에 대해 유용한 정보를 제공할 것이다.

Design of initial support required for excavation of underground cavern and shaft from numerical analysis

  • Oh, Joung;Moon, Taehyun;Canbulat, Ismet;Moon, Joon-Shik
    • Geomechanics and Engineering
    • /
    • 제17권6호
    • /
    • pp.573-581
    • /
    • 2019
  • Excavation of underground cavern and shaft was proposed for the construction of a ventilation facility in an urban area. A shaft connects the street-level air plenum to an underground cavern, which extends down approximately 46 m below the street surface. At the project site, the rock mass was relatively strong and well-defined joint sets were present. A kinematic block stability analysis was first performed to estimate the required reinforcement system. Then a 3-D discontinuum numerical analysis was conducted to evaluate the capacity of the initial support and the overall stability of the required excavation, followed by a 3-D continuum numerical analysis to complement the calculated result. This paper illustrates the application of detailed numerical analyses to the design of the required initial support system for the stability of underground hard rock mining at a relatively shallow depth.

과지압 하에 있는 대규모 지하공동의 지보 시스템에 관한 연구 (A Study on the Support System of Large Caverns Under High Initial Stress)

  • 박연준;유광호;최영태;김재용
    • 터널과지하공간
    • /
    • 제14권2호
    • /
    • pp.154-166
    • /
    • 2004
  • 본 연구에서는 측압이 매우 큰 암반에 대규모 유류저장공동을 병렬로 굴착할 경우, 공동 및 지보재의 역학적 안정성을 평가하였다. 수치해석적인 방법을 동원하여 공동 주변 암반의 거동을 분식하고, 주된 지보재인 rockbolt와 숏크리트의 역할을 분석하였으며, 각 지보재의 안정성을 평가하였다. 적정한 지보시스템 구축을 위하여 지보재 모델링 기법, 공동 단면 형상, 지보재의 규격 등이 공동의 안정성에 미치는 영향을 파악하였다. 해석결과 지보재의 타설시기와 다단계 굴착에 따른 공동 형상의 변화가 지보재에 발생하는 응력에 큰 영향이었음을 알 수 었었으며, 강섬유보강 숏크리트의 변형 및 파괴 특성을 고려한 해석기법 개발의 필요성을 확인하였다.

2차원 연속체 해석에 의한 지하공동 형상비별 안정성 평가 비교 (A comparative study on stability evaluation of caverns by 2D continuum analysis in terms of shape factor)

  • 유광호;정지성
    • 한국터널지하공간학회 논문집
    • /
    • 제10권2호
    • /
    • pp.193-205
    • /
    • 2008
  • 현재 국내에서는 유류 지하 비축 공동, 식품 저장 공동 등과 같은 지하구조물의 건설이 증가하고 있다. 이러한 지하공동의 안정성은 형상 및 크기에 영향을 많이 받는다. 따라서 본 연구는 지하공동의 형상이 안정성에 미치는 영향을 안전율을 중심으로 비교 분석하였다. 이를 위해 5가지의 공동 형상비를 가정하고 암반등급, 토피고 및 측압계수를 달리하여 민감도분석을 실시하였다. 공동의 지보재는 각각의 공동 형상, 크기 및 암반등급을 고려하여 적절한 양의 록볼트와 숏크리트로 보강하였다. 공동의 안정성은 강도감소기법을 이용하여 수치해석에 의해 얻은 안전율을 사용하여 평가되었다. 본 논문은 향후 지하공동 설계 및 안정성 평가에 도움이 될 수 있을 것으로 기대된다.

  • PDF

2차원 불연속체 해석에 의한 양호한 암반 내의 지하공동 형상비가 안정성에 미치는 영향 검토 (The effect of the shape factor of an underground cavern in good rock conditions on its stability by 2D discontinuum analysis)

  • 유광호;정지성
    • 한국터널지하공간학회 논문집
    • /
    • 제11권2호
    • /
    • pp.189-198
    • /
    • 2009
  • 현재 국내 외에서는 유류 지하 비축 공동, 식품 저장 공동 등과 같은 지하구조물 건설에 대한 관심이 증가하고 있다. 이러한 지하공동의 안정성을 평가할 때 형상비나 굴착면적을 비롯하여 지하공동이 굴착될 암반의 절리 발달 상태는 매우 중요하다. 따라서 본 연구는 형상비가 지하공동의 안정성에 미치는 영향을 안전율 중심으로 분석하였다 이를 위해 양호한 암반 내에 시공되는 공동의 네 가지의 형상비를 가정하고, 토피고, 측압계수, 절리의 간격, 강도 및 방향을 달리하여 민감도 분석을 실시하였다. 공동의 안정성은 강도감소기법을 이용하여 수치해석에 의해 얻은 안전율을 사용하여 평가되었다. 본 논문은 향후 불연속면을 포함한 암반에 시공되는 지하공동 설계 및 안정성 평가에 도웅이 될 수 있을 것으로 기대된다.

과지압 암반 내 대규모 지하 유류비축기지 안정성 평가 및 Microseismic 계측 (Stability evaluation and microseismic monitoring around Large Underground Oil Storage Cavern in Over-stressed Rock Mass)

  • 이희석;이대혁;김호영;홍지수;최영태;김석진;박연준
    • 한국터널공학회:학술대회논문집
    • /
    • 한국터널공학회 2005년도 학술발표회 논문집
    • /
    • pp.189-201
    • /
    • 2005
  • Brittle failure has been detected in over-stressed rock mass during the construction of oil storage cavern. The main characteristics of stress induced brittle failure of the site are introduced. Various evaluation and measures are sought to stabilize the over-stressed rock mass. The major results from numerical analysis of the cavern are presented, and from current microseismic monitoring to detect hazard from brittle failure are presented.

  • PDF

Physical model test of Jintan underground gas storage cavern group

  • Chen, Yulong;Wei, Jiong
    • Geomechanics and Engineering
    • /
    • 제30권1호
    • /
    • pp.45-49
    • /
    • 2022
  • In the present study, a physical model was built for the Jintan underground gas storage cavern group according to the similarity theory. In this regard, four ellipsoid caverns were built with scaled in-situ stresses and internal pressure. Then the stability of underground caverns was analyzed. The obtained results demonstrate that loss of internal pressure adversely affects the safety of caverns and attention should be paid during the operation of gas storage.

개별요소법을 이용한 불연속 암반내 지하공동의 변형 거동 해석 (Analysis of Deformation Behavior of Underground Caverns in a Discontinuous Rock Mass Using the Distinct Element Method)

  • 정완교;임한욱
    • 산업기술연구
    • /
    • 제23권A호
    • /
    • pp.69-81
    • /
    • 2003
  • Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

  • PDF

IT 기반의 지하 대공간 설계/안정성 평가 시스템 개발 (Development of IT-based Cavern Design/Stability analysis System)

  • 유충식;김선빈;조완기;유광호;박인준
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
    • /
    • pp.34-41
    • /
    • 2008
  • This paper concerns the development of a IT-based tunnel design system within the framework of artificial neural networks(ANNs). The system is aimed at expediting a routine cavern design works such as determination of support patterns and stability analysis of the selected support patterns. The detailed system development process and functions of sub modules are provided in this paper.

  • PDF

고준위폐기물 처분장의 최적 공동간격 및 처분공간격을 결정하기 위한 역학적 안정성 해석 (Mechanical Stability Analysis of a High-Level Waste Repository for Determining Optimum Cavern and Deposition Hole Spacing)

  • 박병윤;권상기
    • 터널과지하공간
    • /
    • 제10권2호
    • /
    • pp.237-248
    • /
    • 2000
  • 역학적으로 안정한 공동 및 처분공 간격을 결정하기 위해, 현재 수행 중인 열 해석의 중간 결과를 근거로 범용 해석 프로기램인 ABAQUS 버전 5.8을 이용해 3차원 유한요소해석을 수행하였다. 세 가지 초기지압을 조건으로 공동간격과 처분공 간격을 바꿔가면서 선형탄성해석을 수행하였고. 그 결과를 분석하여 굴착 후 응력재분배에 의한 암반의 거동은 어떤 경향을 가지고 있으며, 적절한 공동 간격 및 처분공 간격은 어느 정도가 좋은지를 분석하였다. 또한 각 경우 역학적인 안전계수는 어느 정도인지도 계산하였다. 국내지압분포를 근거로 도출한 초기지압 하에서는 공동간격 40m, 처분공간격 3m인 경우 안전계수 3.42가 계산되어 아주 안정한 결과를 얻었고, 스웨덴이나 캐나다의 초기지압 경힘식의 경우의 안전계수는 각각 1.19와 1.27로 비교적 낮은 값이지만 1 이상의 값이므로 응력재분배로 인한 파괴는 일어나지 않는다는 결과를 얻었다.

  • PDF