• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.305-310
• /
• 2005

Flaxseed is outstanding for lignans and oil rich in ${\alpha}$-linolenic acid which protect against several major illnesses. Better understanding of processing and storage characteristics of flaxseed will increase options for food use. Lignans and oil are found in the hull and embryo, respectively. Comparison of pearling and impact-dehulling processes for separation of lignan and oil-rich fractions showed the impact process was less effective, but easier to scale-up. Screw-pressing embryo reduced oil yield compared to whole seed, but doubled productivity and sharply reduced frictional heating of the oil. Flaxseed hull and embryo, also whole, ground and steamed-ground samples, were stable up to 30 weeks in closed containers at $23^{\circ}C$. Steamed-ground samples in open trays at $40^{\circ}C$ deteriorated markedly (peroxide value > 100 by 22 weeks); yet, whole seed remained stable. Incorporation of 18% flaxseed embryo into yellow perch feed increased ${\alpha}$-linolenic acid to 13 to l4% of muscle and liver lipids, compared to 0.5 to 0.7% in the no-embryo control. Feed conversion ratio, weight gain, and survival were similar. These studies are helping to establish the technological base for processing and utilizing flaxseed and flaxseed fractions to improve human diets.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1169-1178
• /
• 1998

This study was performed to purify fig pectinesterase(F-PE) and characterize its in situ activity. Three kinds of F-PE were partially separated by using ammonium sulfate fractionation, Q-Sepharose column, CM-cation exchanger column chromatography, and HPLC. One of those was anionic protein and the others were cationic proteins. All of them had approximate molecular weight of 27,000 and lost rapidly their activity during storage. Therefore alternative crude enzyme was prepared by suspending the freeze dried and milled fig powder in 0.1 M NaCl at pH 7.5. F-PE had the optimum pH of 8.5, the optimum temperature of $50^{\circ}C$ with activation energy of 7,671 cal $mol^{-1}K^{-1}$ and stability up to $55^{\circ}C$ with 10 minutes heating. Optimum activity was obtained in $0.2{\sim}0.4$ M NaCl with optimum solubility at above 0.8 M NaCl.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.721-733
• /
• 2019

Objective: The objectives of this study were to investigate the thermal gelation properties and molecular forces of actomyosin extracted from two classes of chicken breast meat qualities (normal and pale, soft and exudative [PSE]-like) during heating process to further improve the understanding of the variations of functional properties between normal and PSE-like chicken breast meat. Methods: Actomyosin was extracted from normal and PSE-like chicken breast meat and the gel strength, water-holding capacity (WHC), protein loss, particle size and distribution, dynamic rheology and protein thermal stability were determined, then turbidity, active sulfhydryl group contents, hydrophobicity and molecular forces during thermal-induced gelling formation were comparatively studied. Results: Sodium dodecyl sulphate-polyacrylamide gel electrophoresis showed that protein profiles of actomyosin extracted from normal and PSE-like meat were not significantly different (p>0.05). Compared with normal actomyosin, PSE-like actomyosin had lower gel strength, WHC, particle size, less protein content involved in thermal gelation forming (p<0.05), and reduced onset temperature ($T_o$), thermal transition temperature ($T_d$), storage modulus (G') and loss modulus (G"). The turbidity, reactive sulfhydryl group of PSE-like actomyosin were higher when heated from $40^{\circ}C$ to $60^{\circ}C$. Further heating to $80^{\circ}C$ had lower transition from reactive sulfhydryl group into a disulfide bond and surface hydrophobicity. Molecular forces showed that hydrophobic interaction was the main force for heat-induced gel formation while both ionic and hydrogen bonds were different significantly between normal and PSE-like actomyosin (p<0.05). Conclusion: These changes in chemical groups and inter-molecular bonds affected protein-protein interaction and protein-water interaction and contributed to the inferior thermal gelation properties of PSE-like meat.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.33-36
• /
• 1993

This study was carried out to investigate the thermal stability of gingerol from Ginger and effect of its concentration on the oxidation of soybean oil. After Heating gingerol, the contents of remained gingerol was measured by HPLC. After heat treatment at $105^{\circ}C$ for 3 hours, 94.5% of gingerol was remained, whereas at $165^{\circ}C$ for 30 min., only 10% of gingerol was remained. Crude gingerol was also added to soybean oil at the concentration of 0.02%, 0.1% and 0.2% by weight of oil, respectively. The oils with crude gingerol were heat-treated at $105^{\circ}C$ for 5 hours and $165^{\circ}C$ for 30 minutes, respectively, and then the heat-treated oils were incubated at $45^{\circ}C$ for 25 days. The peroxide value of the oils was measured in order to estimate the antioxidant activity of crude gingerol compared with BHT. In the soybean oil heated at $105^{\circ}C$ for 5 hours, crude gingerol showed antioxidant activity at all concentration and the activity was more effective than 0.02% BHT. And during the storage of the heat-treated oils at $45^{\circ}C$, the antioxidant activity of crude gingerol increased in direct proportion to its concentration. In the soybean oil heated at $165^{\circ}C$ for 30 minutes and then stored at $45^{\circ}C$, the antioxidant activity of crude gingerol increased in direct proportion to its concentration.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.168-180
• /
• 2017

This study was performed to determine the rapid thawing method for reducing the thawing time of frozen pork loins and to examine the effects of supercooling on the microbiological, physicochemical, and sensory qualities of fresh and frozen-thawed pork during storage at -1.5, 4, and $15^{\circ}C$. Forced-air thawing at $4^{\circ}C$ was the most time-consuming process, whereas radio frequency thawing time was the shortest by dielectric heating. The supercooling storage temperature was chosen to be $-1.5^{\circ}C$ because microstructural damages were not observed in the pork sample after cooling at $-1.5^{\circ}C$ for 24 h. Fresh or frozen-thawed pork loins stored at $-1.5^{\circ}C$ had lower drip loss and total volatile base nitrogen, thiobarbituric acid-reactive substance, and Hunter b* levels than loins stored at 4 and $15^{\circ}C$. In addition, the least degree of increase in preexisting microorganisms counts of the fresh or frozen-thawed pork loin samples was obtained during supercooled storage at $-1.5^{\circ}C$. Sensory quality results of fresh and frozen-thawed pork loin samples stored at $-1.5^{\circ}C$ showed higher scores than the samples stored at 4 and $15^{\circ}C$. These data indicate that supercooling at $-1.5^{\circ}C$ in the meat processing industry would be effective for maintaining the quality of pork meats without ice crystal nucleation and formation.

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.42-49
• /
• 1979

In order to evaluate the utility of the anthocyanins of Amaranthys tricolor L. as an edible pigment, the present study was undertaken to investigate the effects of pH. temperature, ascorbic acid, sugars and their degradation products, quercetin, thiourea, sodium pyrophosphate and metal ions on the stability of the anthocyanins in the model systems. The results obtained from this study were as follows. 1. The degradation of total anthocyanins was retarded as the pH levels decreased from 8.0 to 1.0. At pH 1.0, however. the initial degradation reaction proceeded faster than at pH 2.0 to 3.0 2. On heating in buffered aqueous solution at $80^{\circ}C$, the total anthocyanin content was higher at pH 2.0 than other pH levels. Increasing the storage temperature accelerated greatly the pigment degradation. In darkness at $40^{\circ}C$, after 10 days, only 19% of the original amount was left, while at $2^{\circ}C$, under the same conditions of storage, approximately 90% of the pigment was retained. The half-life of the pigment, 63.0 days at $2^{\circ}C$, shortened to 1. 7 days at $40^{\circ}C$. 3. An increase in ascorbic arid concentration from 0. 15 to 0.50 mg/ml lowered the anthocyanin retention. 4. There was no significant difference between glucose and fructose in anthocyanin degradation effect. Furfural was more effective than other sugar degradation products, formic acid or levulinic acid in accelerating anthocyanin breakdown. 5. Neither quercetin nor sodium pyrophosphate had a protective effect on the anthocyanins in the presence of ascorbic acid, while, in the systems 0.5 or 1 mg/ml of thiourea with $150{\;}{\mu}g/ml$ of ascorbic acid, the loss of anthocyanins was significantly reduced. 6. Both mercuric and cupric ions in 30 ppm greatly accelerated anthocyanin degradation.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.612-618
• /
• 1999

Physicochemical properties of amaranth starch were compared with those of waxy rice and waxy corn starches. Amaranth starch granules vary from $1.1{\sim}1.9\;{\mu}m$ in diameter and are polygonal in shape. Total amylose contents from waxy rice, waxy corn and amaranth starches were 0.01, 0.03 and 0.07%, respectively. Swelling power of amaranth starch granule was slightly different from waxy rice. The swelling power of amaranth increased at $70^{\circ}C$. X-ray diffraction patterns of amaranth and other waxy cereal starches showed an A-type crystalline structure. Relative crystallinities of their starches were similar. According to pasting properties by Rapid Visco-Analyzer, amaranth starch showed a very high gelatinization temperature $(75.1^{\circ}C)$ and lower viscosity and higher stability than other waxy cereal starches during heating and cooling cycle. Peak onset temperatures (To) of starches from waxy rice, waxy corn and amaranth in DSC thermograms were $58.7{\sim}64.0$, 67.2 and $71.5^{\circ}C$, respectively, and their peak enthalpies were similar. Enthalpy of reheated amaranth starch after 3 day storage at $4^{\circ}C$ was higher than those of waxy corn and rices starchs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.5
• /
• pp.551-556
• /
• 1992

To develop natural antioxidant from spices and control thermal oxidation of edible soybean oil, the available antioxidative compounds of various spices were extracted with edible soybean oil. The storage stability of the oil mixed with purified sardine oil and soybean oil containing that extracts at $37^{\circ}C$ were investigated. Furthermore the antioxidative activity of petroleum ether soluble fractions(PESF) obtained from rosemary on the thermal oxidation of edible soybean oil during heating at $180^{\circ}C$ were also investigated. By mixing with refined sardine oil and soybean oil extracts of rosemary, sage of herb spices and mace of seed spices, the oxidative stabilities were remarkably increased. The thermal oxidation of edible soybean oil was also supressed by the addition of 1.0%(w/w) of PESF obtained from rosemary. Rosemary extract exhibited higher antioxidative activity on thermal oxidation of edible soybean oil than butylated hydroxytoluene.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.454-462
• /
• 2023

Flash lamp annealing (FLA) of metal nanoparticle (NP) ink has provided powerful strategies to fabricate high-performance electrodes on a flexible substrate because of its rapid processing capability (in milliseconds), low-temperature process, and compatibility with to roll-to-roll process. However, metal NPs [e.g., gold (Au), silver (Ag), copper (Cu), etc.] have limitations such as difficulty in synthesizing fine metal NPs (diameter less than 10 nm), high price, and degradation during ink storage and FLA processing. In this regard, organometallic ink has been proposed as a material that can replace metal NPs due to their low-cost (usually 1/100 times cheaper than metal nano inks), low-temperature processability, and high material stability. Despite these advantages, the fabrication of flexible electrodes through FLA treatment of organometallic compounds has not been extensively researched. In this paper, we experimentally guide how to determine the optimal conditions for forming electrodes on flexible substrates by considering material parameters, and flashlight processing parameters (energy density, pulse duration, etc) to minimize the difficulties that may arise during the FLA of organometallic ink.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.2
• /
• pp.158-164
• /
• 1986

Polyphenol oxidase in apple (Golden Delicious) was extracted, partially purified and its properties were found as follows; Polyphenol oxidase showed optimum pH for activity at 6.5 and optimum temperature at $30^{\circ}C$ and high affinity to o-diphenol compounds. Cysteine, ascorbic acid and sodium metabisulfite appeared to be most effective inhibitors. EDTA showed a slight inhibition. During the enzyme was kept in test tube at $4^{\circ}C\;and\;20^{\circ}C$ for a week, polyphenol oxidase activity decreased sharply during the first four days at $20^{\circ}C$, then decreased slowly as the storage was prolonged. At $4^{\circ}C$, the polyphenol oxidase activity appeared to be relatively stable during the first two days before activity began to decline sharply. Polyacrylamide disc gel electrophoresis indicated four bands with polyphenol oxidase activity. Three bands and one band of the active bands were observed after heating for 1hr at $60^{\circ}C\;and\;70^{\circ}C$ respectively. The enzyme activity was observed 40% after treatment at $60^{\circ}C$ and 5% after treatment at $70^{\circ}C$. Therefore, no difference in the thermal stability was observed between active bands and the enzyme activity.