• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.641-648
• /
• 2007

Computational rotor dynamic analyses of designed composite roller for large LCD panel manufacturing process have been conducted. The present computational method is based on the general finite element method with rotating gyroscopic effects. General purpose commercial finite element code, with special rotordynamics analysis module is applied. For the purpose of numerical verification, comparison study for a benchmark dual rotor model with support bearings is also presented. Detailed finite element models for composite roller with different length are constructed and analyzed considering gravity effect in order to investigate vibration characteristics in actual operation environment. As results of the present study, rotor stability diagrams and mass unbalance responses are presented for different rotating conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.689-696
• /
• 2008

In this study, seepage characteristics of breakwater in dredging ground evaluated for the piping stability estimation by scale model tests. For this, to estimated the seepage characteristics through the model tests and numerical analyses, the engineering stability on piping of breakwater evaluated based on scale model tests and numerical analyses results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1084-1089
• /
• 2009

This paper presents the example of landslide triggered by the failure of earth retaining wall. Close examinations such as visual inspections and non-destructive testings revealed that the earth retaining wall does not have enough strength to resist active earth pressure and ground water pressure. This fact is proved to be a direct initiation of landslide. Numerical studies including slope stability analyses and seepage analyses were performed with material properties obtained by geophysical explorations and laboratory tests. The results of numerical studies show that the overturning of the earth retaining wall affects the slope stability, leading to landslide consequently.

• Structural Engineering and Mechanics
• /
• 제3권1호
• /
• pp.49-60
• /
• 1995

In the present study, a finite strip method for the vibration and stability analyses of anisotropic laminated composite plates is developed according to the higher-order shear deformation theory. This theory accounts for the parabolic distribution of the transverse shear strains through the thickness of the plate and for zero transverse shear stresses on the plate surfaces. In comparison with the finite strip method based on the first-order shear deformation theory, the present method gives improved results for very thick plates while using approximately the same number of degrees of freedom. It also eliminates the need for shear correction factors in calculating the transverse shear stiffness. A number of numerical examples are presented to show the effect of aspect ratio, length-to-thickness ratio, number of plies, fibre orientation and stacking sequence on the natural frequencies and critical buckling loads of simply supported rectangular cross-ply and arbitrary angle-ply composite laminates.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.97-101
• /
• 1986

This paper deals with the problem of stability and error analyses of the FIR filter and the limited memory filters. It is shown that the FIR filter has the best performance among them, which is demonstrated by some simple examples and via simulations.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.82-94
• /
• 2001

The purpose of this paper is to analyze the static and dynamic stability-of the unmanned airship under development ; the target airship's over-all length of hull is 50m and the maximum diameter is 12.5m. For the analysis, the dynamic model of an airship was defined and both the nonlinear and linear dynamic equations of motion were derived. Two different configuration models (KA002Y and KA003Y) of the airship were used for the target model of the static stability analysis and the dynamic stability analysis. From the result of analyses, though the airship is unstable in static stability, dynamic characteristics of the airship can provide the stable dynamic stability. All of the results, airship models and dynamic flight equations will be an important basement and basic information for the next step of developing the automatic flight control system(AFCS) and the stability augmentation system(SAS) for the unmanned airship as well as for the stratospheric airship in the future.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2001년도 춘계 공동학술발표회
• /
• pp.206-207
• /
• 2001

• 대한치과교정학회지
• /
• 제20권3호
• /
• pp.565-581
• /
• 1990

This study was undertaken to investigate the degree of asymmetry in each part of the head in skeletal craniofacial asymmetric patients, and secondarily to determine the nature of difference existed between asymmetric patients and normal persons. The subjects consisted of 49 asymmetric adult patients and 52 normal adults, and the average ages were 21 years 5 months and 23 years 5 months, respectively. The computerized analyses of 33 linear measurements, 12 angular measurements, and 8 surface areas from posteroanterior cephalometric radiograph were carried out. The conclusions were as follows; 1. Asymmetry was a common finding in both normal and asymmetric group. 2. When the analyses were undertaken after the head was divided into 3 parts anteroposteriorly and superoinferiorly in the asymmetric patients, there were significant asymmetries in all parts excepts in the cranial base region. 3. When the analyses were undertaken after the head was divided into respective 3 parts anteroposteriorly in the asymmetric patients, the more posterior part showed relative stability than the more anterior part. 4. When the analyses were undertaken after the head was divided into 3 parts superoinferiorly in the asymmetric patients, the more superior part showed relative stability than the more inferior part. 5. Twelve variables indicating asymmetry were selected and the highest ranked variable was Me-Mid-sagittal reference line.

• 지질공학
• /
• 제15권2호
• /
• pp.133-144
• /
• 2005

강원도에 위치한 D석탄광산에서 발생된 폐광석을 쌓아둔 적치장 사면의 지반공학적$\cdot$환경공학적 측면에서 안정성을 해석하고, 적합한 대 책을 수립하기 위하여 본 연구를 수행하였다. 적치장에서 하천으로 유입되는 침출수에 대한 수질검사를 통해 폐광석 적치장이 산성 광산배수(AMD)를 발생시키고 있음을 확인할 수 있었다. 폐광석 적치장의 사면안정 해석을 위하여 SLOPILE 프로그램을 이용하여 건기시, 평상시, 우기시 에 대하여 원호활동 해석을 실시하였다. 또한, 사면의 규모가 대규모인 점을 고려하여 사면 선단부분을 무한사면으로 가정한 평면파괴 해석도 실시하였다 원호활동해석에서 우기시 사면의 안전율이 0.78로 사면의 선단부에서 파괴가 발생하고, 평면파괴해석의 결과 우기시 활동깊이 4m 이하부터 사면의 안전율이 1이하로 파괴의 가능성을 잠재하고 있는 것으로 나타났다. 따라서 비점오염 형태의 ADM 발생 저감과 사면 안정성 확보라는 측면에서 복합 대응이 가능한 뒷채움재로 폐콘크리트를 활용한 붕괴방치벽체(옹벽) 설치가 제안되었다.

• Wind and Structures
• /
• 제9권4호
• /
• pp.331-344
• /
• 2006

The cable-stayed-suspension hybrid bridge is a cooperative system developed from the traditional cable-stayed and suspension bridges, and takes some advantages of the two bridge systems. It is also becoming a competitive design alternative for some long and super long-span bridges. But due to its great flexibility, the flutter stability plays an important role in the design and construction of this bridge system. Considering the geometric nonlinearity of bridge structures and the effects of nonlinear wind-structure interaction, method and its solution procedure of three-dimensional nonlinear flutter stability analysis are firstly presented. Parametric analyses on the flutter stability of a cable-stayed-suspension hybrid bridge with main span of 1400 meters are then conducted by nonlinear flutter stability analysis, some design parameters that significantly influence the flutter stability are pointed out, and the favorable structural system of the bridge is also discussed based on the wind stability.