• Smart Structures and Systems
• /
• 제23권4호
• /
• pp.347-357
• /
• 2019

A new methodology for mitigation of the wheel squealing is proposed and investigated based on the dithering control. The idea can be applied in railway lines particularly in urban areas. The idea is clearly presented, and applied to a validated model. A full-scale model including the vehicle, curved track and wheel/rail contact is developed in the time domain to analyze the possibility and level of wheel squeal noise. Comparing the numerical results with a field test, the model is validated in different levels namely i) occurrence, ii) squealing frequency and iii) noise level. Two different approaches are proposed a) dithering of the wheel with piezoelectric patches and b) dithering of the rail with piezoelectric stacks. The noise level as well as the wheel responses is compared after applying the control strategy. A parametric study is carried out and effect of the dithering voltage and frequency on the squealing noise is investigated. It is found that both the strategies perform quite effectively within the saturating threshold of piezoelectric actuators.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.174-177
• /
• 2007

In this paper the noise characteristics of metro train is investigated experimentally. It is primarily aimed at observing the squealing noise radiation of each wheel when the vehicle pass the curve sections. This will be used to understand the noise excitation mechanism at the contact area between squealing wheels and rails which induce squeal noise at curve sections. To identify the related key parameters and boundary conditions on-board monitorings of the noise, vibration of the wheel and bogie and displacement behaviour of the wheels and rails have been done. In this paper only noise measurement and results are discussed. From spectrogramms squeal noise due to creepage and noise due to flange contact of the wheels could be identified. At the moment of the curve passing the highest squeal levels are found on the front inner wheel. However since curve noise depends on variable factors more analyses will be followed to identify the squealing wheels and the noise excitation.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.572-577
• /
• 2011

Curve squealing of inter-city railway vehicle is a noise with high acoustic pressure and rather narrow frequency spectra. This noise turns out to be very annoying for the people living in the neighborhood of locations and the passenger in railway vehicle where this phenomenon occurs. Squealing is caused by a self-exited stick-slip oscillation in the wheel-rail contact. Curve squeal noise of railway vehicles that passed by a factor of the speed limit, so to overcome in order to improve running performance is one of the largest technology. In the present paper, characteristic of squeal noise behavior at the Hanvit-200 tilting train test-site. Curve squealing of railway wheels/rail contact occurs in R400~ R800 curves with a frequency range of about 4~11 kHz. If the curve is less than the radius of wheel frail contact due to |left-right| noise level difference (dBA) shows a significant effect of squeal noise were more likely.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1187-1190
• /
• 2009

CURVE SQUEAL NOISE IS THE INTENSE HIGH FREQUENCY TONAL THAT CAN OCCUR WHEN A RAILWAY VEHICLE TRAVERSES A CURVE OR A SWITCH. THE HIGH NOISE LEVEL CAUSES ANNOYANCE FOR PEOPLE WHO LIVE IN THE NEIGHBOURHOOD OF THE SQUEALING RAILWAY TRACK AS WELL AS FOR THE PASSENGERS IN CARS WITH CURVES. THIS PAPER EXAMINES THE SPECTRAL SOUND DISTRIBUTION IN CURVES FOR KTX TRAIN. THE FREQUENCY RANGE IS FROM AROUND 4,000 TO ALMOST 16,000Hz, WITH NOISE LEVELS UP TO 92dB IN CURVE R400.

• 대한수의학회지
• /
• 제49권4호
• /
• pp.351-354
• /
• 2009

Diaphragmatic hernias, whether congenital or acquired (traumatic), are rarely observed in the horse. Acquired diaphragmatic hernias typically occur secondary to trauma or an increase in intraabdominal pressure due to falling, heavy exercise, or parturition. Diaphragmatic herniorrhaphy is difficult to perform in adult horses and the horses with symptomatic diaphragmatic hernias usually die. A 10- year old, 340 kg, Jeju horse (crossbred) broodmare with sudden onset of gait disorder and a moderate emaciation was examined. Findings on physical examination included conjunctivitis, dehydration, shallow breathing, dyspnea, weaken heart beat, lack of auscultatable sounds from the gastrointestinal tract, and anorexia. Rectal temperature was $38.4^{\circ}C$ and respiratory rates were moderately increased. There were slight signs of acute colic. The broodmare died one day after non-specific treatment of fluids, nutriment, antibiotics and non-steroidal anti-inflammatory drug. The cause of death was strangulation of the small intestine through a diaphragmatic hernia. The rent was about 2 cm in diameter and located in the central right part of diaphragm. Around 60 cm of small intestine was protruded into thoracic cavity through the rent. The cause of the hernia could not be ascertained. The broodmare had been pastured with many other horses, and the groom had not noticed any aggressive behavior among them. It was, however, speculated that trauma by stallion's attack may have been the cause of the diaphragmatic hernia, because the new horse may be the object of behaviors ranging from mild threats to seriously aggressive kicking, squealing, rearing, and biting.

• 한국자동차공학회논문집
• /
• 제23권4호
• /
• pp.396-401
• /
• 2015

A door checker holds a car door at several opening angles and limits the maximum door opening, so that the door does not bump against to passengers. Recently, the performance of door checker becomes more important as the feeling of door opening and closing effects on the quality of a car. However, some of door checkers make squealing noise when they are used for ages, which causes consumer's complaints as well as decreasing commercial value of the product. In this study, after various experiments for the noise, we concluded that the major reasons of the noise are acceleration of wearing and loss of lubricant due to impurities in working parts. Therefore, we developed a new mechanism of door checker which can resolve the major reasons of the noise. The developed mechanism is effective to prevent inflow of impurities and loss of lubricant by locating working parts in the case. We also proved that the developed mechanism does not make any noise after the test of 50,000 times of operations.