The aim of this study was to analyze the thermal performance through Test-Cell of TI-wall in domestic climate. This study was carried out as follows: 1) The TI-wall was studied for ability to reduce heat loss through the building envelope and analyzed to TIM properties. 2) Test models of TI-wall were designed through the investigation of previous paper and work, measured for winter and spring, and the thermal effects were analyzed. The type of the TIM used in test model is small-celled(diameter 4mm and thickness 50mm) capillary and cement brick(density $1500kg/m^3$) was used by thermal mass. 3) Test-cell of TI-wall was calibrated from measured data and the dynamic simulation program ESP-r 9.0. In these simulations, the measured climate conditions of TaeJon were used as outdoor conditions, and the simulation model of Test-cell was developed. 4) The sensitivity analysis is executed in various aspects with standard weather files and ESP-r 9.0, and then most suitable system of TI-wall are predicted. Finally, The suitable system of TI-wall was analysed according to sizes of air gap, kinds, thickness, and the surface absorption of therm wall. The result is following. In TI-wall, Concrete is better than cement brick, at that time the surface absorption is 95%, and the most efficient thickness is 250mm. As smaller of a air gap, as reducer of convection heat loss, it is efficient for heating energy. However, ensuring of a air gap at least more than 50mm is desirable for natural ventilation in Summer.
본 연구에서는 철도차량의 사고의 유형 중 가장 많이 발생되는 지그재깅 현상에 대해 이론 모델을 정립하여 선두차량의 지그재깅 거동에 대한 운동방정식을 도출하였다. 운동방정식을 풀기 위하여 미분방정식 수치해석법 중 가장 대표적인 Runge-Kutta 4차식을 사용하였고, 휠-레일 인터페이스에 의한 휠의 횡 변위는 운동에너지를 이용하여 추정하였다. 그리고 이론식을 검증하기 위하여 재그재깅 현상에서 가장 변위가 큰 연결기 위치에서의 횡 변위에 대해 시뮬레이션과 이론식을 비교한 결과 비 탈선 충돌조건에서 최대 편차율은 0.8 [%] ~ 4.7 [%] 발생하고, 탈선 충돌조건에서는 탈선이 일어나는 시점에서 차량의 횡 변위를 비교한 결과 최대 편차율이 0.6 [%] ~ 5.1 [%]로 잘 일치하는 것을 확인하였다. 이론식을 사용하여 사고나 현상을 시뮬레이션으로 재현할 때 필요한, 전체적인 거동에 부합하는 차량 간 연결의 초기 off-set량을 예측할 수 있다.
자전거의 안장 지주에 영구자석의 척력을 이용하여 완충장치를 설치하고자 자기 해석용 상용프로그램을 이용하였다. 유한요소법으로 구한 해석치를 실험치와 비교하여 유한요소 해석치의 신뢰성을 확보하였다. 그 후에 3 자유도계의 자전거 동역학 모델을 완성하고 자석의 크기에 상응하는 등가 스프링 강성값을 모델에 이식하였다. 자전거의 동역학 모델에서 전륜과 후륜은 주행면의 비평탄도에 의한 입력을 부담하도록 하였다. 전륜과 후륜이 독립적으로, 또는 동시에 반삼각 범프(half-triangular bump)와 정현파 굴곡로(sinusoidal road)를 통과할 때의 동적 거동을 살펴보았다. 운전자와 프레임의 수직거동, 주행방향의 피칭 거동을 관찰하였으며 자전거의 완충 시스템을 보다 구체화할 수 있는 기반을 마련하였다.
Energy harvesting from the environment has been of great interest as a standalone power source of wireless sensor nodes for Ubiquitous Sensor Networks(USN). In particular, the piezoelectric energy harvesting from ambient vibration sources has intensively researched because it has a relatively high power density comparing with other energy scavenging methods. Through recent advances in low power consumption RF transmitters and sensors, it is possible to adopt a micro-power energy harvesting system realized by MEMS technology for the system-on-chip. However, the MEMS energy harvesting system has some drawbacks such as a high natural frequency over 300 Hz and a small power generation due to a small dimension. To overcome these limitations, we devised a novel power generator with a spiral spring structure as shown in the figure. The natural frequency of a cantilever could be decreased to the usable frequency region (under 300 Hz) because the natural frequency depends on the length of a cantilever. In this study, the natural frequency of the energy harvester was a lower than a normal cantilever structure and sufficiently controllable in 50 - 200 Hz frequency region as adjusting weight of a proof mass. Moreover, the MEMS energy harvester had a high energy conversion efficiency using a shear mode ($d_{15}$) is much larger than a 33 mode ($d_{33}$) and the energy conversion efficiency is proportional to the piezoelectric constant (d). We expect the spiral type MEMS power generator would be a good candidate for a standalone power generator for USN.
컴퓨터를 이용한 모의 실험 방법은 과학 및 공학 분야뿐만 아니라 경제,사회 현상등에도 널리 적용될 수 있는 유용한 도구이다. 그 중에서도 연속체계 모의 실험은 미분 방정식으로 모델링되는 시스템을 대상으로 하는 경우가 맡으며, 이를 위하여 그동안 맡은 연속체계 모의 실험 언어들이 개발되었다. 그러나 그들은 대부분 사용하기가 복잡하여 사용자 편의성을 고려한 모의 실험 언어에 대한 필요성이 증대되었다. 본 연구에서는 사용자에개 최대한 편의성을 제공하는 연속체계 모의 실험 언어인 PCSL (Postech Continuous-system Simulation language)을 개발하였다. PCSL 프로그램은 프로그램 헤더, 상수 정의부, 함수 정의부, 매개 변수 정의부, 초기화 선언부, 모델 정의부, 종료 조건 선언부, 출력 선언부 등으로 나누어 진다. 그리고 출력으로는 계산 결과를 파일에 저장, 흑은 수치로 인쇄하거나 그래프로 그려서 보여준다. PCSL 처리 시스템은 모델 정의부에서 주어진 미분방정식을 해석해서 digital-analog simulation 기법으로 풀 수 있는 형태로 변환하는 번역기와 이렇게 변환된 형태의 미분방정식과 여러 가지 조건들을 고려해서 C 프로그램을 생성해주는 생성기, 생성된 C 프로그램을 실행시켜서 그 결과를 얻는 실행기,그리고 사용자에게 편리한 입출력 방법을 제공하는 사용자 인터페이스로 구성된다. 번역기에서는 모델로 주어진 미분방정식의 종류를 결정한 후에 이들을 digital-analog simulation 기법으로 풀 수 있는 형태로 변환한다. 생성기에서는 번역기의 결과를 받고,프로그램 상의 여러 가지 조건들을 고려해서 C 프로그램을 생성한다. 여기서 생성된 C프로그램은 미분방정식을 포함하는 ‘f.c'와 조건들을 포함하는'main.h', 그리고 digital-analog simulation 기법을 이용하는 모의 실험 알고리즘을 구현한 'main.c'로 구성된다. 그리고 실행기에서는 생성기에서 생성한 C 프로그램을 실행시켜서 결과를 얻는다. 여기에서 필요로 하는 PCSL 프로그램의 내응은 종료 조건 선언부, 출력 선언부 등이다. 마지막으로 사용자 인터페이스는 사용자가 간편하게 PCSL 프로그램을 입력할 수 있게 도와주며 모의 실험 결과를 쉽게 화면상에 보여주기 위한 것이다. 이 때에 사용자가 원하면 계산 결과를 그래프로 그려서 보여주는 기능과 화면에 보이는 결과를 프린터로 출력할 수 있는 기능을 제공한다. 실형 결과로는 먼저 선형 상미분방정식의 예로 mass-damper-spring system, 비선형 상미분방정식의 예로는 van der Pol 방정식, 연립 상미분방정식의 예로는 mixing tank problem 등을 보였으며, 그의 공학에서 일어나는 여러 가지 문제들도 다루었다.
경기만 염하수로 입구인 영종대교 남단에서 평수기와 홍수기에 13시간동안 연속적으로 층별 유속관측을 수행하였다. 홍수기와 평수기에 한강과 임진강으로의 평균 담수유입량은 각각 약 $8000m^3/s$, $200m^3/s$로 40배의 큰 차이를 보이는데 이러한 변화가 잔차류의 공간 분포와 총 유출입량에 어떠한 차이를 보이는지 분석하였다. 수집된 자료의 분석을 위하여 조석주기 동안의 평균이 필요하며, 반복 관측된 자료의 연직위치와 수평격자위치를 일치시킬 필요성이 있다. 따라서 본 연구에서 공간적 sigma 격자 체계로 변환시켰다. 변형된 sigma 좌표체계는 z-level상의 원시자료와 비교하였을 때 5%이내의 오차로 자료분석에 무리가 없는 것으로 판단되었다. 분석결과 평수기 단면 잔차류는 수로의 수심에 따라 패턴이 다른 수평적 2층 흐름 구조를 보였으며, 홍수기의 경우 표층에서는 낙조하고, 저층에서는 창조하는 수직적 2층 흐름구조를 보였다. 이는 담수의 유입량에 따라 단면에서 공간적 잔차류 흐름구조가 크게 변동되는 특성이 나타났다. 총 수송량은 평수기와 홍수기에 각각 $359m^3/s$, $261m^3/s$ 로 약 $100m^3/s$의 차이를 보였다. 홍수기 많은 양의 담수 유입이 발생하였지만, 총 수송량과 적은 상관도를 보인 것은 염하수로 남단 해역에서 Stokes drift의 크기가 강하게 나타나기 때문으로 보여지며, 총량은 강화도와 영종도 사이의 조간대 지역으로 이동하는 것으로 짐작된다.
Fine particles ($PM_{2.5}$) were collected and analyzed from April 2010 through January 2011 in Chungju to investigate the characteristics of $PM_{2.5}$ and its ionic species. The annual mean concentrations of $PM_{2.5}$, ${SO_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$ in the particulate phase were 40.84, 7.61, 7.14 and $3.74{\mu}g/m^3$, respectively. $PM_{2.5}$ concentrations were higher in fall and spring than in winter and summer. The elevated concentrations episodes are the main factor that enhanced the $PM_{2.5}$ concentrations in the fall. Among the major ionic species ${SO_4}^{2-}$ showed the highest concentration, followed by $NO_3{^-}$ and $NH_4{^+}$, $NO_3^-$ exhibited higher concentrations during the winter, but ${SO_4}^{2-}$ and $NH_4{^+}$ were not showed seasonal variation. The high correlations were found among $PM_{2.5}$, ${SO_4}^{2-}$, $NO_3{^-}$ and $NH_4{^+}$ during all seasons except for spring. The evaluation of backward trajectories and meteorological records show that the highest $PM_{2.5}$ concentration levels occurred during W-NW weather conditions, which influenced by the emission sources of China area. The low pollution levels generally occurred during E-S weather conditions, which influenced by the East Sea and south of the Yellow Sea. The elevated $PM_{2.5}$ mass concentrations arouse the concentration of $NO_3{^-}$, but no effects on ${SO_4}^{2-}$ and $NH_4{^+}$.
한국천문연구원의 NEOPAT 팀과 연세대학교 천문대의 YSTAR 팀이 공동으로 호주 Siding Spring 천문대에 설치한 광시야 자동망원경 2호기를 이용하여 W UMa형 식쌍성 BL Eri의 측광관측을 수행하였다. 이 망원경을 이용하여, 호주와 한국에서 각각 자동관측 모드 및 원격관측 모드로 6일 밤을 관측하여, 새로운 VRI CCD광도곡선과, 5개의 새로운 극심시각을 얻었다. Wilson & Deviney(1971)의 쌍성모델 2005 버전을 이용하여 우리의 광도곡선을 분석하고, 새로운 광도곡선 해를 구하였다. 이 과정에서 우리가 구한 질량비 0.48은 이전의 연구자들이 구한 값과 차이를 보이고 있다. 한편 이 방성계의 접촉상태를 Wilson & Deviney모델을 적용하여 확인한 결과, 현재 BL Eri는 접촉상태에 있는 것으로 보인다.
This paper describes a study of the influence of a dynamically flexible building structure on pressures inside and net pressures on the roof of low-rise buildings with a dominant opening. It is shown that dynamic interaction between the flexible roof and the internal pressure results in a coupled system that is similar to a two-degree-of-freedom mechanical system consisting of two mass-spring-damper systems with excitation forces acting on both the masses. Two resonant modes are present, the natural frequencies of which can readily be obtained from the model. As observed with quasi-static building flexibility, the effect of increased dynamic flexibility is to reduce the first natural frequency as well as the corresponding peak value of the admittance, the latter being the result of increased damping effects. Consequently, it is found that the internal and net roof pressure fluctuations (RMS coefficients) are also reduced with dynamic flexibility. This model has been validated from experiments conducted using a cylindrical model with a leeward end flexible diaphragm, whereby good match between predicted and measured natural frequencies, and trends in peak admittances and RMS responses with flexibility, were obtained. Furthermore, since significant differences exist between internal and net roof pressure responses obtained from the dynamic flexibility model and those obtained from the quasi-static flexibility model, it is concluded that the quasi-static flexibility assumption may not be applicable to dynamically flexible buildings. Additionally, since sensitivity analyses reveal that the responses are sensitive to both the opening loss coefficient and the roof damping ratio, careful estimates should therefore be made to these parameters first, if predictions from such models are to have significance to real buildings.
대형구조물의 국부구조계에는 후판, 선체이중저와 같은 복판팬널 또는 FRP판과 같은 복합적층판에 집중질량, 질량-스프링계 또는 지지스프링 등으로 간주되는 부가제가 추가된 복합제의 진동해석을 수행하여야 되는 경우가 않다. 본 연구에서는 팬널의 receptance와 부가계의 receptance를 합성하여 복합제의 고유진동특성 및 강제진동응답을 효과적으로 얻을 수 있는 receptance 방법의 적용을 제시한다. 상기 팬널들은 전단변형 및 회전관성효과가 매우 크고 대부분 직교이방성 강성을 갖기 때문에 직교이방성 Mindlin판유추 구조계로 간주하였으며, Mindlin판유추 구조계의 receptance를 구하기 위해 assumed mode-Lagrange 운동방정식 원용에 의해 구하는 방법을 정식화하였다. 이때 진동파형은 Timoshenko 보함수 또는 이의 성질을 갖는 다항식을 사용하였다. 등방성후판 및 실선 이중저의 1/8축적 모델을 대상으로 일련의 수치계산을 수행하여 본연구에서 제시한 방법의 타당성을 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.