• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.86-92
• /
• 2008

Recently, the use of tubes in the manufacturing of the automobile parts has increased and therefore many automotive manufactures have tried to use hydro-forming technology. The hydro-forming technology may cause many advantages to automotive applications in terms of better structural integrity of the parts, lower cost from fewer part count, material saving, weight reduction, lower spring-back, improved strength and durability and design flexibility. In this study, the whole process of front engine cradle (or front sub-frame) parts development by tube hydro-forming using steel material having tensile strength of 440MPa grade is presented. At the part design stage, it requires feasibility study and process design aided by CAE (Computer Aided Design) to confirm hydro-formability in details. Effects of parameters such as internal pressure, axial feeding and geometry shape on automotive sub-frame by hydro-forming process were carefully investigated. Overall possibility of hydro-formable sub-frame parts could be examined by cross sectional analyses. Moreover, it is essential to ensure the formability of tube material on every forming step such as pre-bending, preforming and hydro-forming. At the die design stage, all the components of prototyping tools are designed and interference with press is examined from the point of geometry and thinning.

• The Journal of Korean Medicine
• /
• v.22 no.2
• /
• pp.109-119
• /
• 2001

Objective : There are many reports that acupuncture has thermoregulatory effects on human and animals. To investigate the effect and mechanism of antipyretic action of acupuncture, we observed the body temperature and cytokine expressions in the hypothalamus of rats. Methods : Lipopolysaccharide (LPS, i.p., 2.5mg/kg) was injected to conscious rats (Sprague-Dawley, male, n=4l) to cause hyperthermia and simple needling (stainless steel, 0.25 mm o.d., 5 mm insertion for 10 sec with no manipulation) was performed bilaterally with the measurement of rectal temperature. Next, we sacrificed rats to remove brain and determined the level of mRNA for interleukin-6 (IL-6), $interleukin-1{\beta}{\;}(IL-1{\beta})$, interleukin-2 (IL-2) and $interferon-{\gamma}{\;}(IFN-{\gamma})$ in the hypothalamus by using reverse transcriptase-polymerase chain reaction (RT-PCR). Resul1s : Needling on forepaw (acupoint HT8) and needling on hindpaw (acupoint BL66 and acupoint LR2) significantly inhibited LPS-induced fever of rats (P<0.01, 10 min after treatment respectively), but same treatment on proximal tail (non-acupoint) did not cause any change on fever. The levels of IL-6 and $IL-1{\beta}$ mRNA in the hypothalamus was significantly enhanced by LPS-injection, while the level of IL-6 and $IL-1{\beta}$ mRNA was markedly reduced after treatment on BL66 (P<0.01). Treatment on forepaw reduced it slightly, but not significantly. Equivalent stimulation on proximal tail did not cause any changes. Conclusions : Our results indicate that acupuncture stimulation on various body parts has differential thermoregulatory effects on LPS-induced fever of rats with site-specificity. And, we suggest that its antipyretic action might be accompanied with the suppression of hypothalamic production of pro-inflammatory cytokine of immune system, IL-6 and $IL-1{\beta}$.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.8.1-8
• /
• 1982

Foreign bodies in the airway are very import-tant and not uncommon conditions in the field of E.N.T., and practically there are many reports of them. Occasionally, it can be followed by some pulmonary complications and technical difficulty to remove. Therefore, foreign body in the trachea-bronchial tree is serious and, on occasion, fatal. Recently, the authors experienced 7 interesting cases of foreign bodies in the airway and a brief review of literature was made. Case 1. (1 year old male): A bit of walnut was coughed out spontaneously. Case 2. (2 years old male): A bit of raw chestnut was removed from the right main bronchus. Case 3. (21 Years old male): A pushpin was removed from the left main bronchus. Case 4. (1 year old male): A kind of bean was removed from the right main vronchus. Case 5. (4 years old male): A coiled steel spring (1.1cm$\times$2cm) was removed from the subglottic region. Case 6. (5 years old female): A shell of pine nut which had been impacted in the wall of right main bronchus was removed during right middle and lower lobectomy. Case 7. (2 years old male): A metal nail was removed from the rightposterior basal segmental bronchus during right lower lobectomy.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.597-603
• /
• 2012

Non-thermal plasma processing using a dielectric barrier discharge (DBD) has been investigated as an alternative method for the degradation of non-biodegradable organic compounds in wastewater. The active species such as OH radical, produced by the electrical discharge may play an important role in degrading organic compound in water. The degradation of N, N-Dimethyl-4-nitrosoaniline (RNO) was investigated as an indicator of the generation of OH radical. The DBD plasma reactor of this study consisted of a plasma reactor, recycling pump, power supply and reservoir. The effect of diameter of external reactor (15 ~ 40 mm), width of ground electrode (2.5 ~ 30 cm), shape (pipe, spring) and material (copper, stainless steel and titanium) of ground electrode, water circulation rate (3.1 ~ 54.8 cm/s), air flow rate (0.5 ~ 3.0 L/min) and ratio of packing material (0 ~ 100 %) were evaluated. The experimental results showed that shape and materials of ground were not influenced the RNO degradation. Optimum diameter of external reactor, water circulation rate and air flow rate for RNO degradation were 30 mm, 25.4 cm/s and 4 L/min, respectively. Ground electrode length to get the maximum RNO degradation was 30 cm, which was same as reactor length. Filling up of glass beads decreased the RNO degradation. Among the experimented parameters, air flow rate was most important parameters which are influenced the decomposition of RNO.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.377-379
• /
• 2007

To reduce the chattering errors of reed switch sensors used for automatic remote measurement of water supply system, a reed switch sensor was analyzed and improved. The operation of reed switch sensors can be described as a mechanical contact by approximation of permanent magnet piece to generate an electrical pulse. The reed switch sensors are used in measurement application by detecting the rotational or translational displacement. To apply for flow measurement devices, the reed switch sensors should keep high reliability. They are applied for the electronic digital type of water flow meters. The reed switch sensor is just installed simply on the mechanical type flow meter. A small magnet is attached on a pointer of the water meter counter rotor. Inside the reed sensor, two steel leaf springs make mechanical contact and apart as rotation of flow meter counter. The counting electrical contact pulses can be converted as the water flow amount. The MCU sends the digital flow rate data to the server using the wireless communication network. But it occurs data difference or errors by chattering noise. The reed switch sensor contains chattering error by it self at the force equivalent position. The vibrations such as passing car near to the switch sensor installed location. In order to reduce chattering error, most system uses just software methods for example using filter and also statistical calibration methods. The chattering errors were reduced by changing leaf spring structure using mechanical hysteresis characteristics.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.7-12
• /
• 1975

The sap uses of Korean sugar maple, Acer mono Max., "Gorosoe-namoo," the most abundant growing stock in maples, for a medical beverage at every early spring have had the long history in Korea. The sap of Korean sugar maple (the maple) was prepared with a unique tapping method from the trees during the sap flow season of 1974, measured the sugar content in $2.6^{\circ}$ to $3.3^{\circ}Brix$ of sugar on average and the sugar concentration of the sap was enough for a sweetener resource comparing with those of American sugar maples in literature. The color of sirup was very dark and the color index was 2.69 for the sirup of $15.3^{\circ}Brix$ having 10 hours evaporation and 3.380 for the standard sirup, as shown in Table 3 and Figure 2, due to the prolonged evaporation in deep aluminium or stainless steel kettles. The alcohol extractives of standard sirup has the light color and the residue reddish brown and the absorption spectra have the maxima in wave length of 350 nm, 1,000 nm, 1,170 nm, 1,400 nm and 1900 nm, as shown in Figure 3. The extractives of ethanol and monoethanolamine mixture (97:3, v/v) has dark red and the residue darker redish brown.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.820-824
• /
• 2010

The purpose of this study is to develop basic technology of hybrid rocket vehicle by constructed and launched. This small hybrid rocket using HDPE/LN2O and Aluminium steel for its body (weight : 12.5 kg, diameter : 114 mm, height : 1.8 m) was designed. The fuel grain and injector were designed for 50 kgf thrust and burning time 2.5 sec. This rocket was loaded the data acquisition device for obtaining data of pressure and velocity during its flying and equiped an automatic ejector system using spring/motor and timer to collect the rocket more safely after launching. It was launched successfully, but found some problem that the rocket's weight was heavier than expected and the thrust was not enough to reach the designed altitude and analyzed its flight path way.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.126-134
• /
• 2009

Generally, reinforced concrete structures exposed to the outside temperature are affected by freezing and thawing process during winter and early spring. These freeze-thawing process can lead to the reduction in durability of concrete as cracking or surface spalling. This paper is to study the flexural behavior of RC beams exposed to freeze-thawing environments. To compare the difference in flexural behavior of RC Beams, limited tests were conducted under different types of Longitudinal steel ratio and freeze-thawing cycles. For this purpose, fourteen small-scale RC beams ($100mm{\times} 100mm {\times}600mm$) were strengthened in monotonic and cyclic loadings, subjected to up to 150, 300 cycles freeze-thawing from $-18{\sim}4^{\circ}C$. It is thought that experimental results will be used as basic data to evaluate flexural behavior of RC beams exposed to freeze-thawing.

• Steel and Composite Structures
• /
• v.25 no.2
• /
• pp.141-155
• /
• 2017

This paper presents an investigation into the magneto-thermo-mechanical vibration and damping of a viscoelastic functionally graded-carbon nanotubes (FG-CNTs)-reinforced curved microbeam based on Timoshenko beam and strain gradient theories. The structure is surrounded by a viscoelastic medium which is simulated with spring, damper and shear elements. The effective temperature-dependent material properties of the CNTs-reinforced composite beam are obtained using the extended rule of mixture. The structure is assumed to be subjected to a longitudinal magnetic field. The governing equations of motion are derived using Hamilton's principle and solved by employing differential quadrature method (DQM). The effect of various parameter like volume percent and distribution type of CNTs, temperature change, magnetic field, boundary conditions, material length scale parameter, central angle, viscoelastic medium and structural damping on the vibration and damping behaviors of the nanocomposite curved microbeam is examined. The results show that with increasing volume percent of CNTs and considering magnetic field, material length scale parameter and viscoelastic medium, the frequency of the system increases and critically damped situation occurs at higher values of damper constant. In addition, the structure with FGX distribution type of CNTs has the highest stiffness. It is also observed that increasing temperature, structural damping and central angle of curved microbeam decreases the frequency of the system.

• Smart Structures and Systems
• /
• v.31 no.3
• /
• pp.213-227
• /
• 2023

A passive prismatic-shaped isolation platform (PIP) is proposed to realize enhanced quasi-zero stiffness (QZS) effect. The design concept uses a horizontal spring to produce a tunable negative stiffness and installs oblique springs inside the cells of the prismatic structure to provide a tunable positive stiffness. Therefore, the QZS effect can be achieved by combining the negative stiffness and the positive stiffness. To this aim, firstly, the mathematical modeling and the static analysis are conducted to demonstrate this idea and provide the design basis. Further, with the parametric study and the optimal design of the PIP, the enhanced QZS effect is achieved with widened QZS range and stable property. Moreover, the dynamic analysis is conducted to investigate the vibration isolation performance of the proposed PIP. The analysis results show that the widened QZS property can be achieved with the optimal designed structural parameters, and the proposed PIP has an excellent vibration isolation performance in the ultra-low frequency due to the enlarged QZS range. Compared with the traditional QZS isolator, the PIP shows better performance with a broader isolation frequency range and stable property under the large excitation amplitude.