• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.87-96
• /
• 2020

In this study, a variable elasticity spring was applied to improve the pressure control precision of conventional relief valves. The equilibrium equation of the forces acting on the valve poppet was derived; it is demonstrated that matching the elastic rate of the pressure-adjusting coil spring to the equivalent elastic rate of the flow force improved the pressure override. The procedures that were used to design the variable elasticity spring are presented, and some applications of the variable elasticity spring are also introduced. Computer simulations were used to analyze three cases: a poppet-closed flow force structure, a poppet-open flow force structure with a constant elasticity spring, and a structure containing a variable elasticity spring. It is confirmed that the pressure control precision of the relief valve can be significantly improved upon by applying a variable elasticity spring to the poppet-open flow force structure.

• 한방안이비인후피부과학회지
• /
• 제20권2호통권33호
• /
• pp.132-141
• /
• 2007

Objectives : The purpose of this study is to consider the definition, history, classification and clinical effect of balneotherapy. Methods : We researched oriental documents and recent sources of balneotherapy. Results and Conclusions : 1. Balneotherapy is medical cure method which uses physical chemistry effects of water. 2. Records of balneotherapy are seen in oriental documents such as Hwangjenaegyeong(黃帝內經), Sinnongbonchogyeong(神農本草經), Jaebyoungwonhuron(諸病源候論), Youmoonsachin(儒門事親), Bonchogangmok(本草綱目) and Donguibogam(東醫寶鑑) etc. 3. Spa can classify eleven types according to ingredient. The types were as following. Simple thermal spirng, Common salt spring, Sodium bicarbonated spring, Sulfate spring, Radioactive spring, Acid spring, Sulfur spring, Carbon dioxide spring, Iron spring, Alum spring & Sulfate-iron spring, Bicarbonatealkaline spring. 4. Physical, chemical and environmental effect of spa therapy have effectiveness on the chronic and we akness disease more than acute disease. And balneotherapy have more effectiveness on digestive disease, pulmonary disease, metabolic disease, circulatory disease, muscle skeletal disease and dermatologic disease than any other diseases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1127-1132
• /
• 2003

Suspension system of vehicle have enough endurance during its life time to protect passenger. Spring is one of major part of vehicle. Thus, a fatigue strength evaluation for leaf spring based on road load response was carried out. At first, strain of leaf spring is measured on the city condition and proving ground condition. And next, the damage analysis of road load response data was carried out. And fatigue test of leaf spring were also carried out. Based on -N life relation, fatigue life of leaf spring was evaluated at belgian mode, city mode and drawing test specification. After that, it is compared the design life of leaf spring and evaluated fatigue life by belgian mode, city mode and drawing test specification. From the above, the maximum load-fatigue life relation of leaf spring was defined by test. and new test target of belgian mode and city mode was proposed to accept design specification of leaf spring. It is expect that proposed test target can verify leaf spring fatigue endurance at specific road condition.

• Composites Research
• /
• 제17권2호
• /
• pp.1-8
• /
• 2004

본 논문은 겹판 스프링의 정적 스프링 상수를 가지고 복합재료 데이퍼 스프링을 최적설계 하였다. 두께와 폭을 설계변수로 실정하였다. 회귀모형의 목적함수는 상용 해석 프로그램을 통해 얻었다. 회귀모형의 함수를 가지고 회귀계수를 계산한 후, DOT를 이용하여 최적해를 구하였다. 설계에 이용된 복합재료로는 E-glass/epoxy와 carbon/epoxy를 선정하였고 겹판 스프링과 비교 해석하였다. 그 결과 정적 스프링 상수는 최적화된 복합재료 스프링들과 겹판 스프링이 1％내로 일치함을 보였다.

• 한국식품위생안전성학회지
• /
• 제17권2호
• /
• pp.55-60
• /
• 2002

In order to investigate the microbiological contamination of spring water, we performed the standard plate count, coliform and psychrotrophilic bacteria in 109 spring waters in Seoul. Of 109 spring waters, geometirc mean standard plate count was 0.19 CFU/ml, and the highest in Mt. Boolam, 4..43 CFU/ml and Mt. Dobong, 3.86 CFU/ml, but not detected in Mt. Woomyun and Mt. Cheonggye. Four spring waters have shown over 100 CFU/ml in standard plate count. The geometric mean psychrotrophilic bacteria was 49.2 CFU/ml, the most prevalent spring water was Mt. Nam, 125 CFU/ml, the lowest Mt. Woomyeun. Among a total of 109, coliform was detected from 21 spring waters(19.3%) and the geometric mean of coliform was 0.005 MPN/100ml. The isolated genera of coliform were 7 isolates of E. coli(33%), 5 Klebsiella(24%), 4 Enterobacter(19%), 3 Citrobacter(14%) and 2 Serratia(10%), respectively. The 22 spring waters(20.2%) failed to meet the standard limits of drinking water based on regulation in Korea. The inappropriate rate of standard plate count in spring water was 4.5%, that of coliform was 81.1% and both of them was 13.6%. There was the significant correlation between standard plate count and psychrotrophilic bacteria in spring water(r=0.95, p<0.01).

• Tribology and Lubricants
• /
• 제37권2호
• /
• pp.77-80
• /
• 2021

In this study, we investigated the effect of the spring constant on frictional behavior at a nanoscale through molecular dynamics simulation. A small cube-shaped tip was modeled and placed on a flat substrate. We did not apply the normal force to the tip but applied adhesive force between the tip and the substrate. The tip was horizontally pulled by a virtual spring to generate relative motion against the substrate. The controlled spring constant of the virtual spring ranged from 0.3 to 70 N/m to reveal its effect on frictional behavior. During the sliding simulation, we monitored the frictional force and the position of the tip. As the spring constant decreased from 70 to 0.3 N/m, the frictional force increased from 0.1 to 0.25 nN. A logarithmic relationship between the frictional force and spring constant was established. The stick-slip instability and potential energy slope increased with a decreasing spring constant. Based on the results, an increase in the spring constant reduces the probability of trapping in the local minima on the potential energy surface. Thus, the energy loss of escaping the potential well is minimized as the spring constant increases.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.99-109
• /
• 2007

The purpose of the study is to examine the effect of the spring shoe through the comparison of spring shoe to general shoe. For this, 12 healthy females in the age from 20 to 30 years participated in the E.M.G. experiment with testing kinematic variables. Results indicated that there was significant differences in angle of ankel between the general and spring shoe. Specifically, the spring shoe showed a bigger angle of take on and a smaller angle of take off in walking than the general shoe. This mesns that the spring shoe does not have a significant effect to produce efficient and smooth walking. In addition, the spring shoes revealed a bigger rear-foot angle than the general shoe in the evaluation of rear-foot control function. This means that the rear-foot control function of the spring shoe is low compared to trhe general shoe. Meanwhile, there is no significant differences in angle of knee and angle of Achilles tendon between both shoes. In an analysis of E.M.G., the significant differences were found in gastrocnemius muscle, anterior tibial musculi, musculi rectus femoris, biceps muscle of thigh between both the general and spring shoe groups by the section. In the case of gastrocnemius muscle, the spring shoe showed a low muscle production of anterior tibial musculi than the general shoe. This is a result from structural nature of the sole of a foot of the spring shoe. The spring shoe performs a rolling movement through slightly large pronation toward front-foot from rear-foot in supprt time before taking-off of toe and the power for this movement is mainly produced from musculi rectus femoris.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.838-842
• /
• 2017

위성용 단일추진제 시스템에 적용되는 핵심부품 중 하나인 추력기 밸브는 솔레노이드 방식을 이용하여 추진제를 공급/차단한다. 밸브에 장착되는 원형 판스프링은 마찰과 반복운동에 의한 위치변형 및 파티클이 없다. 본 연구에서는 원형 판스프링 소재, 두께, 반경을 고정변수로 원형 판스프링 내부 패턴의 너비를 설계변수로 설정하여 유한요소해석 및 검증시험을 하였다. 시험결과 변위에 따른 스프링 상수 k가 선형적인 특성이 나타났다. 원형 판스프링 총면적에 따른 스프링력의 경향성을 통해 원형 판스프링의 설계가 가능함을 확인하였다.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.157-164
• /
• 2001

This paper performs static and dynamic tests of a multi-leaf spring and a tapered leaf spring to investigate their hysteretic characteristics. In the static test, trapezoidal input load is applied with 0.1Hz excitation frequency and with zero initial loading conditions. In the dynamic test, sinusoidal input load is applied with five excitation amplitudes and three excitation frequencies. In these tests, static and dynamic hysteretic characteristics of the multi-leaf spring and the tapered leaf spring are compared, and, the effects of excitation amplitudes and frequencies on dynamic spring rate are also shown. In this paper, actual vehicle tests are performed to study the effects of hysteretic characteristics of the large-sized truck's handling performance. The multi-leaf spring or the tapered leaf spring is used in the front suspension. The actual vehicle test is performed in a double lane change track with three velocities. Lateral acceleration, yaw rate and roll angle are measured using a gyro-meter located at the mass center of the cab. The test results showed that a large-sized truck with a tapered leaf spring needs to have an additional apparatus such as roll stabilizer bar to increase the roll stabilizer due to hysteretic characteristics.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1352-1358
• /
• 2004

The mechanical spring is one of widely used machine elements. Among various kinds, flat-type spring loaded by a rotating pin was studied. A flat spring was simplified to a cantilever beam, and numerical analysis was attempted. Since the loading pin rotates about a separate axis from the fixed spring or vice versa, the location, direction, and magnitude of the contact force including normal contact and friction loads vary accordingly. Meanwhile, the spring is deformed substantially as the relative motion progresses. Therefore, this problem needs to be formulated taking the follower loading characteristics and geometrical non-linearity into account. Derived nonlinear differential equation was solved to yield the spring deflection, contact force and the torque to rotate the pin, and the result was compared with a finite element solution. Also, the influences of principal design parameters were studied. The proposed methodology is expected to be useful for the design of pin-loaded flat spring and the prevention of mechanical failures in the form of yielding or fatigue failure of spring or severe wear of the components.