• 한국수산과학회지
• /
• 제49권3호
• /
• pp.310-316
• /
• 2016

This study was conducted to evaluate the physicochemical characteristics, perform a sensory evaluation of glutinous barley gruel after adding Hizikia fusiformis powder to promote consumption, and identify the best ratio and recipe. The gruel was prepared with rice and glutinous barley powder, and various levels (0, 2.5, 5.0, and 7.5%) of H. fusiformis powder. pH, color, viscosity, and spreadability of the gruel were investigated. A sensory evaluation was conducted by 20 panelists in the categories of color, flavor, taste, texture appearance, and overall preference using a 9-point hedonic scale. The viscosity and pH of the gruel increased as H. fusiformis powder content increased, whereas spreadability of the gruel decreased gradually as H. fusiformis powder content increased. As the level of H. fusiformis powder increased, lightness decreased significantly, whereas redness and yellowness increased. Color, bitter taste, and H. fusiformis flavor of the gruel increased significantly as H. fusiformis powder content increased. On the other hand, sweet taste (delicious taste level) and viscosity were not different among the different gruels. The sensory test results indicated that the gruel with 5% H. fusiformis powder had the best overall acceptability. In conclusion, glutinous barley gruel with 5% added H. fusiformis powder was more acceptable than the others.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.54-58
• /
• 2013

Joint properties of vehicle ECU (Electric Control Unit) module which was manufactured by using Sn-Cu-Cr-Ca alloy were investigated. A new solder which has a middle melting temperature about $231^{\circ}C$ was fabricated as the type of 300um solder ball and paste type. The prototype modules were made by reflow process and measured spreadability, wettability shear strength and estimated interface reaction. The spreadability of the alloy was about 84% from the measurement of contact angle of the solder ball and the wetting force was measured 2mN. The average shear strength of the module which was manufactured by using the solder paste, was 1.9 $kg/mm^2$. Also, the thickness of IMC(intermetallic compound) was evaluated with various aging temperature and time in order to understand Cr effect on Sn-0.7Cu solder. $Cu_6Sn_5$ IMC was formed between Cu pad and the solder alloy and the average thickness of the $Cu_6Sn_5$ IMC was measured about 4um and it was about 50% of thickness of $Cu_6Sn_5$ IMC in Sn-0.7Cu. It is expected to have a positive effect on reliability of the solder joint.

• Journal of Dairy Science and Biotechnology
• /
• 제26권2호
• /
• pp.51-56
• /
• 2008

Using central composite design, we have designed optimization of the manufacturing of processed butter. And response surface analysis by least-square regression was used Statistical Analysis System(SAS). Central composite design can be achieved by response surface techniques that allow flexibility in modeling and analysis. Response surface methodology(RSM) was used to optimize hardness(%) using as independent variables; the content of butter($X_1$), ranging from 50 to 90(%), the content of soybean oil($X_2$), from 0 to 20(%), and the hydrogenated soybean oil($X_3$) from 0 to 4(%). The results on the regression coefficients calculated for overrun by response surface by least-square regression(RSREG) were followed. It was considered that the linear regression was significant(p<0.01). As for the processed butter, the regression model equation for the hardness(Y, %) to the change of an independent variable could be predicted as follow: $Y=60.88-8.92X_2-{29.3X_2}^2$. The optimal for the manufacturing of processed butter were determined at the content of butter of 88.22%, soybean oil of 6.71% and hydrogenated soybean oil of 2.36%, respectively. Optimum compositions were resulted in hardness of 65.78 N. Finally the reference sample(Butter in the morning, Seoul Dairy Co-op.) and processed butter manufacturing under the optimal conditions were compared with spreadability test. The spreadability scores result from reference sample and butter under optimal conditions was not found a significant difference.

• 한국식품과학회지
• /
• 제27권6호
• /
• pp.839-844
• /
• 1995

맛, 조직감, 안정성 등에 영향을 미치지 않는 지방대체물질을 이용한 저열량, 저지방 마요네즈를 제조하기 위하여 4종류의 지방대체물질에 대한 점도를 측정하고, 지방대체물질의 식용유에 대한 유지대체비율을 달리하여 제조한 저지방 마요네즈에 대해 물성검사와 관능 검사를 시행하였다. 지방대체물질 paste는 모두 의가소성유체의 특성을 보였고, 의가소성과 항응복력은 Neutral DR(DR), N-Lite L(NL), Sta Slim 150(SS), Stellar 100X(SX)순으로 증가하였다. 지방대체물질이 첨가된 마요네즈의 경도와 부착성도 위와 같은 순으로 증가하였고, 지방대체물질의 첨가비율이 높은 마요네즈일수록 경도와 부착성이 낮았다. DR이 첨가된 마요네즈의 spreadability는 DR paste의 점조도지수를 잘 반영해준다. 지방대체물질의 이용은 마요네즈의 oily odor와 greasy aftertaste를 감소시켰다.

• 한국조리학회지
• /
• 제16권1호
• /
• pp.1-12
• /
• 2010

본 연구는 약리 및 기능성 작용을 지닌 쑥을 덖음 80, 110, $230^{\circ}C$에서 6분, 데침의 1분, 오븐 건조($50^{\circ}C$, 5분)에서 첨가량을 0.1, 0.2, 0.5%로 하여 다양한 방법으로 브라운 소스에 첨가하여 물리적 특성 및 관능을 분석하였다. 색도는 덖음과 데침에서 적은 유의차를 보였다. 당도는 덖음 $110^{\circ}C$, 0.5%에서 가장 높았고, 모든 처리군에서 첨가량이 증가할수록 역시 증가하였다. 퍼짐성은 덖음은 0.5%에서 증가하였고 데침에서는 0.1%에서 감소하였으나 유의차는 적었다. 관능 특성은 데침의 0.1, 0.2, 0.5%와 덖음과 오븐 건조의 0.1%에서 높게 나타났다.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.93-98
• /
• 2005

The purpose of this study is to investigate the characteristics of pb-free $Zn-(3\~6)\%Al-(1\~6)\%Cu$ solder alloys for ultra high temperature(>573K) which applied to air craft, space satellite, automotive, oil, gas well exploration and data logging of geo-thermal wells. Melting range, solderability, electric resistivity, microstructure and mechanical properties were examined with solder alloys casted in Ar gas atmosphere. $Zn-4\%Al-(1\~3)\%Cu,\;Zn-5\%Al-(2\~4)\%Cu\;and\;Zn-6\%Al-(3\~5)\%Cu$ alloys satisfied the optimum melting range of 643 to 673k for ultra high temperature solder. A melting temperature increased with increasing Cu content, but decreased with increasing Al content. The spreadability was improved with increasing hi content. But the content of Cu had no effect on the spreadability. The electric resistivity was lowered with increasing Al and decreasing Cu content. In all Zn-Al-Cu solder alloys, primary dendritic $\varepsilon$ phase(Zn-Cu), dendritic $\eta$ phase(Zn-Cu-Al), $\alpha(Al-Zn)-\eta$ eutectic and eutectoid phase were observed. The addition of Al increased the volume fraction of eutectic and eutectoid phase and it decreased f phases. Also, the addition of Cu increased slightly the volume fraction of e, the eutectic and eutectoid phases. With increasing total content of Al and Cu, a hardness and a tensile strength were linearly increased, but anelongation was linearly decreased.

• 상하수도학회지
• /
• 제13권3호
• /
• pp.101-106
• /
• 1999

This research aims to compare immobilized catalysts prepared by various methods and determine suitable $TiO_2$ catalyst for water purification. Sol-gel method by Anderson and powder coation method by Tanaka ate famous in the methods to immobilize catalyst. Therefore, the $TiO_2$ catalyst for this research was prepared by sol-gel method and powder coating method. Its structure was tested by X-ray diffractometer (XRD), Scanning electron microseope (SEM). Durability of a catalyst-support couple in an solution was investigated. too. Experimental results were summarized as following; i) Optimum ratio of Ti : $H_2O$ : $H^+$ to obtain stable sol was 1 : 10 : 0.1 and the XRD patterns of $TiO_2$ film immobilized by sol-gel method which were fired at $700^{\circ}C$ showed that the catalyst had an anatase structure. ii) The particle size of $TiO_2$ prepared by sol-gel method was less than $5{\mu}$, but it was observed that coated side was not unifiom. iii) Sol-gel method was very effective to obtain $TiO_2$ catalyst of thin film, but spreadability and durability of a catalyst-support couple in a solution were than $TiO_2$ film immobilized by powder coating method. iv) The particle size of $TiO_2$ immobilized by powder coating method was a little larger than it prepared by sol-gel method, but spreadability and uniformity of $TiO_2$ film and durability of a catalyst-support couple in a solution were better than it immobilized by sol-gel method.

• 한국식생활문화학회지
• /
• 제21권2호
• /
• pp.171-178
• /
• 2006

Tarakjuk with different amylose content was made up using roasted rice flours that consisted of the highest enzyme-resistant starch (RS), while differential scanning calorimetry (DSC) was also utilized to measure the gelatinization temperature of these roasted rice flours in order to establish cooking temperature of tarakjuk. The following qualities of tarakjuk with different amylose content were studied: color, viscosity, spreadability, starch fractions involving total starch (TS), rapidly digestible starch (RDS), slowly digestible starch (SDS) and RS, in vitro starch digestibility (IVSD) and sensory properties. During experimentation, it was found that as the amylose content of the rice flour decreased, the L value of tarakjuk decreased, whereas a value increased significantly (p<0.05). Also, while viscosity showed to increase significantly (p<0.05), on the opposite end, the property of spreadability decreased. TS ranged from $15.95{\sim}17.31%$, RDS $9.36{\sim}10.16%$, SDS $5.46{\sim}6.91%$ and RS $0.33{\sim}1.07%$, on a dry basis. Although the amylose content of rice flours decreased, IVSD increased, however showing no significant difference. When testing the sensory properties of tarakjuk, color and viscosity increased, whereas clumpiness decreased. Ilpum tarakjuk showed the highest score for nutty taste and overall acceptance levels. In fact a high correlation was shown between nutty taste and overall acceptance level (p<0.01), which leads one to believe that nutty taste is a prime factor that greatly influences overall acceptance. Furthermore, viscosity was positively correlated with both a and b values, however negatively correlated with L value (p<0.05). Moreover, roasted nutty taste and overall acceptance were positively correlated with a value (p<0.05), respectively. In conclusion, the above results suggest that tarakjuk could be made by choosing the appropriate rice flour based on the nutritional or sensory purpose.

• 대한화장품학회지
• /
• 제32권1호
• /
• pp.45-51
• /
• 2006

화장품에서 색조 화장품 분야에서 분체의 함유율이 높은 투웨이케익, 팩트, 페이스파우더와 같은 파우더류 제품은 함유되는 분체의 물성이 품질에 큰 영향 인자로 작용하기 때문에 분체의 복합화, 금속비누 처리, 아미노산처리, 실리콘처리, 불소 처리등을 통한 품질 향상을 목적으로 표면처리가 시도되어 왔다. 위와 같은 파우더류 제품중에 투웨이케익은 커버력이 가장 요구되는 제품으로서 부착성이나 퍼짐성과 같은 부가품질의 동시 구현이 다른 파우더류 제품보다 어려우며, 화장을 두껍게 느끼거나 답답하다는 사용자들의 잠재불만도 존재하는 제품군이다. 본 연구는 투웨이케익 제품의 중요품질인 부착성과 퍼짐성을 향상시키고, 친화성을 충분히 고려한 새로운 표면처리 방법으로서 피부성분과 구조를 모사하여, 스킨케어에 주로 사용하는 성분들로 나노베시클을 제조하여 그 구조를 파괴하지 않은 상태로 표면 처리하는 방법에 대한 것이다. 분체를 제조하기 위해 먼저, 레시친, 세라마이드, 초산토코페롤, 부틸렌글리롤을 사용하여 고압.유화로 나노유화물을 제조하였고, 이것을 수상에 분산된 체질안료 분산액에 투입, 2가 금속염 용액을 투입한 후, 여과, 건조과정을 통해 나노베시클이 피복된 새로운 기능의 분체를 얻었다. 피복되는 공정에서는 금속염의 농도에 따라 피복량이 결정됨을 확인하였고, 피복된 파우더의 물성에서는 현재 주로 사용하는 실리콘 처리체질안료에 비해 본 연구를 통해 제조된 파우더의 마찰계수가 낮았으며, 외력에 의한 부착성 평가에서도 파우더의 이탈량이 적은 결과를 나타내었다. 또한 이를 함유한 투웨이케익과 함유하지 않은 투웨이케익의 평가에서도 같은 경향의 결과를 나타내었다.

• 대한가정학회지
• /
• 제47권3호
• /
• pp.79-85
• /
• 2009

This study examined the effects of added amounts of Lotus root powder on the physical and sensory properties, and consumer acceptability of Jook. As the level of Lotus root powder increased, L-value decreased and a and b values increased. The Jook also had higher viscosity and lower spreadability values as the amount of Lotus root powder increased. Sensory characteristics, such as color intensity, viscosity, nutty taste, and off-flavor increased significantly with the addition of Lotus root powder. A consumer acceptability test indicated that the 25% Lotus root powder group had the highest overall acceptability, appearance, flavor, and texture. In conclusion, to enhance the quality of Jook, a 25% addition of Lotus root powder would be the most beneficial.