• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.22-33
• /
• 2005

본 논문에서 직접순차 확산 스펙트럼 시스템의 적응 횡단선 필터에서 LMS 알고리즘의 수렴 속도를 향상시키기 위한 효율적인 신호간섭 제어기법을 제안한다. 수신 데이터를 재순환하여 심볼 시간주기에 계수들을 곱함으로써 적응되는 제안된 알고리즘의 수렴특성이 수렴 속도의 향상을 이론적으로 증명하기 위해 분석한다. 스텝-크기 매개변수 ${\mu}$가 증가됨에 따라 알고리즘의 수렴 속도가 제어된다. 또한, 스텝-크기 매개변수 ${\mu}$의 증가는 실험적으로 계산된 학습 곡선에서 분산을 감소시키는 효과를 갖는다. 고유치 확산을 증가시킴에 따라 즉응 등화기의 수렴속도를 천천히 제어하고 평균 자승 에러의 안정-상태 값을 증가시키는 효과를 나타내며 데이터-재사용 LMS 기술이 수렴속도를 (B+1)배만큼 증가시켜 필터 알고리즘에서 신호간섭제어의 우수성을 입증한다.

• 한국통신학회논문지
• /
• 제34권4C호
• /
• pp.469-475
• /
• 2009

Chirp 확산 대역에서 (chirp spread spectrum: CSS) 데이터 전송량을 증가시키기 위해 사용되는 오버랩 기법은 인접 심벌 간 간섭을 (intersymbol interference: ISI) 유발하여 심각한 비트 오류율 (bit error rate: BER) 성능 저하를 초래한다. 따라서 효과적으로 오버랩 기법을 사용하기 위해서는 요구되는 BER 성능 기준에 따라 적절한 횟수로 오버랩을 실시하여야 한다. 본 논문에서는 근사화 된 가우시안 Q 함수를 바탕으로 오버랩 횟수를 매개변수로 가지는 오버랩 기법이 적용된 CSS 시스템의 닫힌꼴 BER 성능 수식을 유도한다. 유도한 닫힌꼴 BER 성능 수식의 정확성은 모의실험 결과와의 비교를 통하여 검증한다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.342-350
• /
• 2010

Randomizing the switching frequency (RSF) to reduce the electromagnetic interference (EMI) of switching power converters is a well-known technique that has been previously discussed. The randomized pulse position (RPP) technique, in which the switching frequency is kept fixed while the pulse position (the delay from the starting of the switching cycle to the turn-on instant within the cycle) is randomized, has been previously addressed in the literature for the same purpose. This paper presents a double-hybrid technique (DHB) for EMI reduction in dc-dc switching regulators. The proposed technique employed both the RSF and the RPP techniques. To effectively spread the conducted-noise frequency spectrum and at the same time attain a satisfactory output voltage quality, two parameters (switching frequency and pulse position) were randomized, and a third parameter (the duty ratio) was controlled by a digital compensator. Implementation was achieved using field programmable gate array (FPGA) technology, which is increasingly being adopted in industrial electronic applications. To evaluate the contribution of the proposed DHB technique, investigations were carried out for each basic PWM, RPP, RSF, and DHB technique. Then a comparison was made of the performances achieved. The experimentally investigated features include the effect of each technique on the common-mode, differential-mode, and total conducted-noise characteristics, and their influence on the converter’s output ripple voltage.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.193-200
• /
• 1997

Flame spread and heat release properties and incident heat flux of interior materials subject to an igniter heat flux in a compartment are investigated and compared by using computer model. A comer fire ignition source is maintained for 10 minutes at 100 kw and subsequently increased to 300kw. In executing the model, base-line material properties are selected and one is changed for each run. Also 4 different igniter heat flux conditions and examined. Results are compared for the 12 different materials tested by the ISO Room Comer Test (9705). The time for total energy release rate to reach 1MW is examined. The parameters considered include flame heat flux and thermal inertia, lateral flame spread parameter, heat of combustion and effective heat of gasfication. The model can show the importance of each property in causing fire growth on interior Hnish materials in a compartment. The effect of ignitor heat flux and material property effects were demonstrated by using dimensionless parameters a, b and Tb. Results show that for b greater than about zero, flashover time in the ISO Room-Corner test is principally proportional to ignition time and nothing more.

• 한국음향학회지
• /
• 제41권2호
• /
• pp.184-191
• /
• 2022

천해에서의 음파는 긴 지연시간을 가지는 다중경로를 통해 전달되며 이러한 특성은 통신에서 Inter-Symbol Interference(ISI)을 야기하기 때문에 성능을 악화시킨다. 본 논문에서는 잔향음 우세 환경에서의 통신성능을 분석하고 다중경로 지연시간과의 상관관계를 파악하기 위해 5 × 5 × 5 m³ 수조에서 다양한 심볼 전송속도(100 sym/s to 8000 sym/s)를 갖는 Binary Phase-Shift Keying(BPSK) 신호를 이용하여 실험을 수행하였다. 제어가능한 수조 환경에서의 음향 채널은 수조 내 경계면 및 벽면에서의 다중반사로 인해 밀집한 다중경로 특성을 가지며 약 40 ms 이하의 최대 초과 지연과 8 ms 이하의 Root Mean Squared(RMS) 지연확산을 보였다. 본 논문에서는 4가지 통신 복조 기법을 이용하여 Bit Error Rate(BER) 성능과 출력 Signal-to-Noise Ratio(SNR) 성능을 분석하며 잔향음 우세 환경에서의 심볼 시간과 RMS 지연확산의 비율인 Symbol interval to Delay spread Ratio in reverberant environment(SDR_rev)을 정의하여 통신성능이 보장될 수 있는 기준 심볼 전송속도를 제시한다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.184-191
• /
• 2000

In this research, a numerical model is developed for analysis of buried pipelines considering longitudinal permanent ground deformation(PGD) due to liquefaction induced lateral spreading. Buried pipelines and surrounding soil are medeled as continuous pipelines using the beam elements and a series of elasto-plastic springs uniformly distributed along the pipelines, respectively. Idealized various PGD patte군 based on the observation of PGD are used as a loading configuration and the length of the lateral spread zone is considered as a loading parameter. Numerical results are verified with other research results and efficient applicability of developed procedure is shown. Analyses are performed by varying different parameters such as PGD pattern, pipe diameter and pipe thickness. Results show that response of buried pipelines are more affected by pipe thickness than pipe diameter. Finally, the critical length of the lateral spread zone and the critical magnitude of PGD which cause yielding, local buckling or tension failure are proposed for the steel pipe which are normally used in Korea.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1230-1239
• /
• 1996

This paper analyzes matched-filter acquistion performance of a direct-sequence spread-specturm multiple-access system in a Rayleigh fading channel. For an application of multiple access system, multiple access interference is considered in the performance analysis. A signal flow graph technique is used to derive mean acquisition time in terms of detection and false alarm probabilities. As aresult of performance analysis, it is shown that mean acquisition time increases as fading rate becomes faster andthe numbre of users increases, and it decreases as a matched-filter length becomes logner. The variation of parameter values hs much influence on acquisition performance as SNR/chip becomes smaller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.201-204
• /
• 2004

Consider the optimal design for PV system, it is apply to 3kW interconnected electric power PV system, that is a point of reference for 3kW PV the spread residential section system. Through the driving various practical system, we look into that for efficiency of generation and stability of interconnected system. Using obtained data acquisition, It can be suggest that installation and management for system parameter to optimal design maximum generation electric power. PV system have some losses that are variation radiation, shadow, change temperature, unbalanced grid connection, serial circuit loss, MPP deference loss, PCS loss and so forth. Using obtained various performance characteristic result, we can make database in the future, through the this study, we can get the reliance and have regard to spread PV system.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.393-405
• /
• 2009

The Purpose of this paper is to show the applicability of a methodology, developed by the authors, with which to perform the mechanical optimization of space truss structures strongly restricted. This methodology use a parameter call "Volumetric Displacement", as the Objective Function of the optimization process. This parameter considers altogether the structure weight and deformation whose effects are opposed. The Finite Element Method is employed to calculate the stress/strain state and the natural frequency of the structure through a structural linear static and natural frequency analysis. In order to show the potentially of this simple methodology, its application on a large diameter telescope structure (10 m) considering the strongly restriction that became of its use, is presented. This methodology, applied in previous works on continuous structures, such as shell roof and fluid storage vessels, is applied in this case to a space truss structure, with the purpose of generalize its applicability to different structural topology. This technique could be useful in the morphology design of deployable and retractable roof structures, whose use has extensively spread in the last years.

• Earthquakes and Structures
• /
• 제5권3호
• /
• pp.277-296
• /
• 2013

Margin of safety against potential of progressive collapse is among important features of a structural system. Often eccentricity in plan of a building causes concentration of damage, thus adversely affects its progressive collapse safety margin. In this paper the progressive collapse of symmetric and asymmetric 3-story reinforced concrete ordinary moment resisting frame buildings subjected to the earthquake ground motions are studied. The asymmetric buildings have 5%, 15% and 25% mass eccentricity. The distribution of the damage and spread of the collapse is investigated using nonlinear time history analyses. Results show that potential of the progressive collapse at both stiff and flexible edges of the buildings increases with increase in the level of asymmetry in buildings. It is also demonstrated that "drift" as a more easily available global response parameter is a good measure of the potential of progressive collapse rather than much difficult-to-calculate local response parameter of "number of collapse plastic hinges".