• 제목/요약/키워드: spraying performance

검색결과 169건 처리시간 0.028초

복합열화촉진실험 및 장기현장폭로실험에 의한 RC구조물 보수공법의 보수성능평가 (Performance Evaluation of Repair Methods for RC structures by Accelerating Test in Combined Deterioration Chamber and Long-Term Field Exposure Test)

  • 권영진;김재환;한병찬;장승엽
    • 한국철도학회논문집
    • /
    • 제9권4호
    • /
    • pp.349-356
    • /
    • 2006
  • At present, the selecting system and analytic estimation criterion on repair materials and methods of the deteriorated RC structures have not yet been set up in domestic. Under these circumstances, deterioration such as shrinkage crack, corrosion of rebar has been often occurred after repair, and this finally results in too frequent repairs. In this study, three types of repair methods were experimentally investigated by the accelerating test in a combined deterioration chamber and long-term field exposure test. Three types of repair methods applied in this study belong to a group of polymer cement mortar, which is commonly used in repair works. According to the results of this study, durability of repair mortar layers and corrosion properties of recovered rebar could be investigated in short period by the accelerating test in a combined deterioration chamber, which can simulate the condition of repeated high-and-low temperature and repeated dry-and-wet environment, spraying chloride solution and emitting $CO_2$ gas. After 36 month long-term filed exposure test in the coastal area, harmful macro-cracks are observed in the polymer cement mortar layer of some repair methods. These crack are considered to result from drying shrinkage of polymer cement mortar. Also, after 36 month exposure, amount of corrosion area and weight loss of rebar are found to be different according to the types of repair methods.

Efforts to obtain better rice seedlings performance under nontidal swamp land agro-ecosystem in south Sumatra, Indonesia

  • Suwignyo, Rujito A.;Sakagami, J.;Ehara, H.;Sulaiman, F.;Hasmeda, M.
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.50-50
    • /
    • 2017
  • Swampland is a potential alternative land to be used in various agricultural production activities in Indonesia, because Indonesia have 33.41 million hectares of swamp land that consists of 13.28 million hectares nontidal swamp and million hectares 20.13 tidal swamp. In the province of South Sumatra, because of unpredictable water level in the field before planting, farmers have been doing agronomic adaptation method through the delay time of transplanting and forced to apply more than one the nursery practice with the combination of a floating nursery method and a dry-bed nursery method. This study was aimed to (1) evaluate the seedling growth and tillering pattern of several popular Indonesian rice varieties, and (2) look for alternative technologies to get a better rice seedlings under two nursery methods in the nontidal swamp land. In the first experiment, the seedling growth characteristics of five rice varieties (Ciherang, Inpara 5, Inpara 9, Inpari 29, and Inpari 30) was evaluated by two methods of nursery, i.e. floating nursery and dry-bed nursery. In the second experiment, rice variety of Inpari 30 was treated with Zn seed priming and foliar fertilizer of 2,300 ppm N at the nursery stage. Those treatments were combined with the time of seedling under floating and dry-bed nursery. The results of the first experiment showed that of the five varieties tested, dry-bed nursery method showed better seedling growth than floating nursery. This was indicated by high leaf number, tiller number, tillers pattern, shoot-root ratio and relative growth rate. Ciherang and Inpari 30 showed high tiller number, and they had produced tertiary tiller in the sixth week of observation. Moreover, shorter period of floating and dry-bed nursery in combination with the treatment of Zn seed priming and spraying seedling with foliar fertilizer N could improve the growth of seedlings.

  • PDF

섬유산업 배기가스 정화용 Electric Fume Collector 설비의 유지보수를 위한 맞춤형 세정제 (A Customized Cleaning Agent for the Maintenance of Electric Fume Collector Used for the Purification of Effluent Gas from the Textile Industry)

  • 김호태;유황율;전경민;송두리;김진배
    • 공업화학
    • /
    • 제29권2호
    • /
    • pp.229-236
    • /
    • 2018
  • 섬유산업에서 배출되는 오일미스트를 함유한 배기가스를 처리하기 위해 개발되어 실제 현장에 적용되고 있는 electric fume collector (EFC) 설비의 집진판 오염에 의한 성능저하를 개선하기 위한 맞춤형 세정제를 검토하였다. 집진판 표면의 오염물질은 오일미스트가 장기간 축적되면서 심하게 탄화되어 일반 세정제로는 쉽게 제거하기 어려운 상태였다. 오염물질의 특성과 집진판 모재의 손상 등을 고려하여, 알칼리, 알코올, 글리콜 및 비이온계 계면활성제로 구성된 최적의 세정제 성분 조성을 결정하였다. 현장실증실험에는 개발된 세정제 원액을 9.1%로 희석한 용액을 이용하였으며, 단순한 분무방식으로 심하게 점착된 집진판 표면의 오염물질을 성공적으로 제거할 수 있었다. 집진판의 세척에 의하여 EFC 설비의 배기가스 정화성능 개선효과도 크게 향상되었다.

관수방법, 관수회수 및 송풍처리에 따른 초화류의 생장에 미치는 영향 (Effects of Method, Number of Times for Spraying and! Ventilation Condition on the Growth in Greenhouse)

  • 민병로;김웅;이범선;이대원
    • 생물환경조절학회지
    • /
    • 제13권3호
    • /
    • pp.149-155
    • /
    • 2004
  • 본 연구에서는 주행경로의 설정 및 제어가 용이한 고정 경로 방식을 이용한 주행 시스템을 개발하여 온실의 형태, 고랑의 위치 등에 무관하게 자동관수 및 송풍장치에 따른 생육상태를 실험할 수 있는 다목적 자동작업시스템을 개발하였다. 이 시스템의 성능들을 알아보기 써해 초화류에 대하여 실험한 결과 다음과 같은 결과론 얻었다. 인력두상관수 처리구에서는 전반적으로 생육의 부진을 나타냈으며, 자동관수 처리 중 송풍을 하지 않은 무풍처리구치 경우, 초장 및 엽면적이 높은 것으로 나타났다. 초장의 억제는 저속과 고속송풍처리구에 있어 초장억제 효과가 유의성이 있게 나타났으며, 풍속이 빠를수록 초장억제효과가 높게 나타났다. 줄기의 지름은 송풍을 하지 않고, 자동관수 3회를 한 경우 줄기의 지름이 작은 것으로 나타났다. 엽수는 인력관수나 자동관수 2회 처리에 비하여 3회 처리가 더 많은 것으로 나타났다. 생육은 관수회수가 많을수록 생장량이 높게 나타났다.

공기부양판을 적용한 에어쿠션 트랜스포터의 개발 (Development of Air Cushion Transporter Using the Pneumatic Floating Pad)

  • 정현목;홍준희;윤동원;박희창;김병인;이성휘
    • 한국생산제조학회지
    • /
    • 제25권5호
    • /
    • pp.338-344
    • /
    • 2016
  • Recent trends in transport system for carrying heavy freight are that demands of a high efficiency, economic efficiency, convenience and safety are increased. Conventional transport systems were poor in transport efficiency and economic efficiency. And Safety problems can be caused to products and workers. In order to overcome these problems, an air cushion transport device with a high-pressure air is required. The air cushion transporter is a device for reducing the frictional force of floor surface and lifting the heavy freight by spraying the high-pressure air to the floor. Technology to float and transfer freight using high-pressure air is very convenient and initial cost can be reduced. In this paper, the study on the levitation performance and transport efficiency of air cushion transport system is conducted and verified that air cushion transporter has a significantly higher transport efficiency than conventional heavy handling systems.

메탈로센 폴리올레핀을 이용한 핫멜트 점착제의 제조 및 특성 (Adhesion Properties of Hot-Melt Pressure Sensitive Adhesives Based on Metallocene Polyolefin)

  • 심재호;성익경;이정준
    • 접착 및 계면
    • /
    • 제14권2호
    • /
    • pp.95-100
    • /
    • 2013
  • 본 연구에서는 메탈로센 폴리올레핀(metallocene polyolefin, me-PO)과 점착부여제(tackifier)를 이용해 열용융형 감압접착제(hot-melt pressure sensitive adhesives, HMPSAs)를 제조하여 물리적 특성을 확인하였고, me-PO가 HMPSAs의 용도에서 스타이렌계 블록 코폴리머(styrenic block copolymers, SBCs)를 대체하여 사용 가능한지에 대해 고찰하였다. 또한, me-PO를 베이스 폴리머로 사용한 HMPSAs의 성능을 최적화하기 위하여 점착부여제가 가져야 할 특성을 알아보고자 하였다. me-PO를 이용하여 Dahlquist Criterion을 만족하는 HMPSAs를 얻기 위해서는 점착부여제와 함께 10% 이상의 프로세스 오일을 혼합 사용하여야 했고, Spray Type의 Applicator에 적합한 수준의 점도를 가지는 HMPSAs를 얻기 위해서는 상대적으로 결정화도가 낮은 제2의 me-PO를 사용해야 했다. 그리고, 분자량이 큰 점착부여제를 사용하면 SBCs계 HMPSAs에 비해 부족한 유지력을 개선시키는데 기여하는 것으로 밝혀졌다.

청정에너지 회수용 유증기/매연 포집모듈에 관한 연구 (A Study on the Oil-mist/Smoke Collecting Module for the Pure Energy Recycling)

  • 김명수;오꾸라 시게노부;함경춘
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 추계학술발표대회 논문집
    • /
    • pp.279-284
    • /
    • 2009
  • Traditionally, so-called "industrial waste gases", such ad exhaust from boilers at industrial installations and a large quantity of soot discharged from power station, before their release into the atmosphere, have been on occasion subjected to an air cleaning process to remove fine particles that may pollute the atmosphere (such as mist and dust containing various powdery or oily substances and moisture from industrial waste gases). The release of industrial waste gases containing these particles directly into the atmosphere poses a serious threat to the earth environment; and recovery of these noxious substances is required by law in some countries and local governments. in urban areas, air pollution from automobile exhaust and others creates a serious condition. Some homes are equipped with and use indoor air purifiers. In many of the kitchens of restaurants, smoke generated during cooking and otherwise contaminated air are cleansed by air purifiers before being released outside or recycled inside. For the dust collecting devices to recover the fine particles contained in contaminated air, the cause for air pollution and how to purify air, many types based on various principles are known. Specifically, classified based on theories of particle collection, filtration, gravity, inertia, centrifugation, electricity, and cleaning types are cited as available processes. Among them, an appropriate type is selected according to the size or type of fine particles to be collected and conditions for installation. For the efficiency of dust collection, a filtration system (by using bag filters and others) and electric system are particularly outstanding and are therefore used widely in various areas of industry. In this research, rotary type high performance oil mist and smoke collecting system with self auto cleaning device equipped with the cleaning fluid spraying section is investigated.

  • PDF

Maryblyt 기반 참다래 꽃썩음병 예측모형 개발 (Development of a Maryblyt-based Forecasting Model for Kiwifruit Bacterial Blossom Blight)

  • 김광형;고영진
    • 식물병연구
    • /
    • 제21권2호
    • /
    • pp.67-73
    • /
    • 2015
  • P. syringae pv. syringae에 의해 발생하는 참다래 꽃썩음병은 개화기 전후의 기상조건에 영향을 크게 받는다. 지금까지 기상조건과 꽃썩음병 발생의 상관관계를 밝힌 연구들은 많았지만, 이를 활용해 꽃썩음병의 감염 위험도를 나타낼 수 있는 예측모형은 개발되지 않았다. 본 연구에서는 기존 정보를 조사하고 꽃썩음병의 병원생태와 유사한 화상병 예측모형인 Maryblyt모형을 기반으로 참다래 꽃썩음병 예측모형인 Pss-KBB Risk Model을 개발하였다. 비교평가를 통한 검증 결과, Pss-KBB Risk Model은 각각 온도와 강수 정보만을 이용하는 개화전 평균온도 모형과 강우일수 모형에 비해 실제 과수원의 병해 발생정도를 더 잘 모의하는 것으로 나타났다. 따라서 Pss-KBB Risk Model과 기상예보자료를 활용해 꽃썩음병의 발병 위험도를 예측하여 꽃썩음병에 대한 적기적량 방제가 가능할 것으로 판단된다.

축소 모형실험을 이용한 습윤-건조 반복작용이 옹벽 구조물의 거동에 미치는 영향 (Effect of Cycles of Wetting and Drying on the Behavior of Retaining Walls Using Reduced-Scale Model Tests)

  • 유충식
    • 한국지반공학회논문집
    • /
    • 제29권12호
    • /
    • pp.25-34
    • /
    • 2013
  • 본 논문에서는 계절적 환경변화로 인한 습윤-건조 반복과정에 노출되는 옹벽구조물의 거동에 관한 축소 모형실험 연구 내용을 다루었다. 이를 위해 먼저 습윤-건조 과정을 모사할 수 있는 모형 옹벽 실험 장치를 구축하고 강우강도 및 뒤채움흙의 종류 등을 매개변수로하여 다양한 조건에 대한 실험을 수행하였다. 그 결과 강우로 인한 습윤-건조 반복 과정은 옹벽의 변위를 증가시키고 토압을 증가시키는 등 거동 측면에서 불안정성을 야기시킬 수 있는 인자로 검토되었다. 한편, 전반적으로 첫 번째 습윤-건조 사이클에서 변위가 가장 크게 발생하고 그 이후 습윤 사이클에서의 변위 증가량은 사이클이 진행되면서 감소되는 것으로 관찰되었다. 아울러 이러한 습윤-건조 반복과정의 영향은 뒤채움흙의 종류에 따라 그 정도가 차이나는 것으로 나타났으며 세립분 함유량이 클수록 습윤-건조 반복작용의 영향이 큰 것으로 검토되었다.

SM490-TMC 후판(40 mm) 강재의 SAW 용접을 통한 기계적 특성 연구 (A Study on Mechanical Properties of SM490-TMC Back Plate(40 mm) Steel by SAW Welding)

  • 이성준
    • 한국산학기술학회논문지
    • /
    • 제22권3호
    • /
    • pp.88-93
    • /
    • 2021
  • 선박의 건조과정이나 압력용기의 몸체 부분을 용접할 경우 많이 사용되는 SAW(Submerged Arc Welding)는, 용접 부위에 분말 형태의 용제(Flux)를 일정 두께로 살포하고 그 속에 전극 와이어를 연속적으로 공급하여 용접이 이루어지는 방법으로 용접 시 발생되는 아크열이 외부로 노출되지 않는 특징이 있으며, 잠호용접으로 불리기도 한다. 또한 1,500~3,000A의 전류까지 통전 할 수 있는 고전류 용접이 가능하며 아크효율이 95% 이상, 미세한 금속 산화물 입자인 Welding Fume 발생량이 적고 아크광선이 외부로 노출되지 않아 청정한 작업이 가능하며 용입이 깊고 결함이 잘 발생하지 않아 용접 이음부의 신뢰도가 높다. 본 연구에서는 SM490C-TMC 후판을 서브머지드 아크용접(SAW)을 이용하여 이종 용접한 후 용접부의 기계적 특성을 인장, 경도, 매크로, 자분탐상 검사 결과를 분석하여 다음과 같은 결론을 도출하였다. 굽힘 시험 결과 시료에서 표면의 터짐 현장이 발생하지 않았고 기타 결점의 유무를 확인할 수 없었으며, 이는 용접 이후 소성변형 과정에서도 충분한 인성을 발휘하고 있는 것으로 나타났으며, 1F 용접 방법이 굽힘 성능에 문제가 없는 것으로 판단되었다.