• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.319-323
• /
• 2013

Red rice (Oryza sativa L.) is one of the most important weeds in most of rice cultivating area. Seed germination related experiments were done to evaluate germination percentage, emerging speed, and initial growth by seeding depth and soil moisture level. The four experiments, 1) temperature, 2) seeding depth, 3) soil moisture level, and 4) seeding position, were done with combination each other on phytotron for germination and seedling growth related experiments of redrice. The treatments levels were: 1) Temperatures were 20/15(Low), 25/20 (Mid.), $30/25{\circ}C$ (High), (day/night), 2) seeding depths were 0, 3, 6 cm, 3) soil moisture levels were 25, 35, 45, 55, 65% (VWC, %), and seeding position were furrow, ridge, ridge-top. The germination percentage and germination speed of red rice were higher and faster than Daeanbyeo in low temperature. Yoeongcheon redrice of seed germination percentage and seedling length was more vigor than Hapcheon red rice. Red rice was not germinated on 6 cm seeding depth until 11 days after seeding except high temperature treatment. Germination percentage increased with increasing soil water percentage in low temperature, however it was greatest in 45% in high soil moisture level between 25% to 65% in low temperature. Seed germination percentage and seedling length were not significantly different among the soil water level in mid- and high temperature levels. In conclusion, red rice could germinate in top soil (<6 cm) in mid- and high temperature range, so we might be control red rice by spraying herbicide after germination of red rice combined with delayed rotary cultivation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.4
• /
• pp.228-233
• /
• 2007

Pear psylla, Caccopsylla pyricola (Homoptera: Psyllidae), is a serious insect pest in pear orchards. C. pyricola overwinters as adults under rough bark scales of pear trees. When the weather warms up in the spring, the overwintered adults become active, climb up to the tree branches, and inhabit on fruit twigs to lay eggs. This study was conducted to develop a forecasting model for the onset of upward-movement of overwintered C. pyricola adults to control them by timely spraying of petroleum oil. The adult population densities were observed under rough barks (B) and on fruit twigs (T) of pear trees. Relative upward-movement rates (R) were calculated as T/(B+T). Low threshold temperatures for the activation of overwintered C. pyricola adults were selected arbitrarily from 5 to $9^{\circ}C$ at a $1^{\circ}C$ interval. Then, the days (D) when daily maximum air temperatures were above each low threshold temperature were counted from 1 February until to the dates with R $\geq$ 0.8. The same methods were applied for the prediction of the first observation of eggs. The variation of coefficients (CV) for the mean Des were lowest with the low threshold temperature of $6^{\circ}C$. At this selected threshold temperature, the upward movement of C. pyricola adults occurred with 12 D and they started laying eggs with 25 D. In the field validation, the model outputs with the $6^{\circ}C$ threshold temperature reasonably well explained the observed data in Suwon and Cheonan in 2002. Practical usages of the model were also discussed.

• The Journal of Engineering Geology
• /
• v.30 no.2
• /
• pp.185-198
• /
• 2020

High-density rapid expansion material is a method that increases the solid volume of injection materials due to hydration and foam reactions at the same time as spraying. It is an effective method for securing ground stability, restoring subsidence, and loading during construction of structures. In this regard, through the mechanical experiments of injection materials, the stability of the foundation ground of the structure and the effect of increasing the endurance using site construction were analyzed. The results of the experiment showed that the unit weight of soil decreased by 10.5% after injection of the filling material, and the allowable support for the structure was deemed safe, and the subsidence by each section after ground improvement was determined to be safe at 2.28, 1.55 and 0.46 cm, respectively, with an acceptable subsidence of less than 5 cm. After the field test, five inclinometers were installed on the top floor of the target building to measure the displacement of the X and Y axes. As a result of the measurement, no displacement related to the phenomenon of inequality or subsidence cracks of the structure was measured for about 16 months (509 days) after construction. This can be judged to be a sufficient increase in the stability of the ground after the injection of rapid expansion.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.304-313
• /
• 2019

Biopolymer based on microbial β-glucan and xanthan gum is effective for vegetation and has a function of enhancing soil strength, which can be used as soil reinforcement and stabilization materials in river embankment. The purpose of this study is to verify the vegetation effect of the surface of levee by biopolymer with seed spraying method. Mixed soils with biopolymer were used to cover the surface of embankments. The strength is higher in biopolymer-treated soil and xanthan gum based biopolymer has advantage for quality control in field scale. In addition, the vegetation of F. arundinacea and L. perenne showed various reactions with types of biopolymers. Biopolymer has a positive effect on the vegetation of them. In contrast, root growth tended to decrease in biopolymer-treated soils. The results indicate that root growth is slow down due to increasing ability to retain water in biopolymer-treated soil. In order to apply biopolymer to river embankment, it is necessary to examine the effects of biopolymers on a wide range of plant species in river embankment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.83-90
• /
• 2017

Concrete structure for nuclear power plant is mass concrete structure with large wall depth and easily permits cracking in early age due to hydration heat and drying shrinkage. It always needs cooling water so that usually located near to sea shore. The crack on concrete surface permits rapid chloride intrusion and also causes more rapid corrosion in the steel. In the study, the effect of age and crack width on chloride diffusion is evaluated for the concrete for nuclear power plant with 6000 psi strength. For the work, various crack widths with 0.0~1.4 mm are induced and accelerated diffusion test is performed for concrete with 56 days, 180days, and 365 days. With increasing crack width over 1.0mm, diffusion coefficient is enlarged to 2.7~3.1 times and significant reduction of diffusion is evaluated due to age effect. Furthermore, apparent diffusion coefficient and surface chloride content are evaluated for the concrete with various crack width exposed to atmospheric zone with salt spraying at the age of 180 days. The results are also analyzed with those from accelerated diffusion test.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.327-336
• /
• 2011

The purpose of this study is to investigate the residual fluoride concentration of polymer adhesive tape in oral cavity which is made by spraying NaF on PVA base and to compare with Fluoride varnish(Cavityshiled$^{TM}$). Experimental groups were divided into two according to application methods; Group 1(NaF-PVA tape) and Group 2(Cavityshiled$^{TM}$). Topical fluoride was applied to 20 healthy adults aged from 25 to 30. Fluoride concentration in unstimulated whole saliva was measured by fluoride-sensitive electrode for 72 hours. 1. Until 72 hours after application in every group, significantly higher fluoride concentration was shown in saliva than baseline value(p<0.05). 2. At 2, 3 and 4 hours after application, Group 2 revealed significantly higher fluoride concentration than Group 1(p<0.05). 3. At 24, 48 and 72 hours after application, there was no significance(p>0.05). Although the residual fluoride concentration of saliva and the amount of fluoride of NaF-PVA tape are lower than those of Cavityshield$^{TM}$, NaF-PVA tape is considered to be more effective since it showed almost the same result as Cavityshield$^{TM}$. Therefore, NaF-PVA tape is expected to be a great fluoride application material.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1183-1196
• /
• 2018

Objective: This study ascertained effects of roughage quality, period of day at meal termination and time lapse after feeding on digesta load in the rumen. Methods: Veld hay was untreated (poor roughage quality, PRQ), improved (improved roughage quality, IRQ) by treating with urea or semi-improved by spraying with urea (semi-improved roughage quality, SIRQ). Experiment 1a used four rumen fistulated sheep to determine in-sacco degradability. Twelve sheep ($56.3{\pm}4.59kg$) were blocked by weight and randomly allocated to IRQ (n = 6) and PRQ (n = 6) to determine solid and liquid passage rates. In experiment 1b, nine sheep ($37.6{\pm}9.34kg$) were blocked by weight and randomly allocated to IRQ (n = 4) and PRQ (n = 5) to determine digestibility. Sixteen sheep ($36.47{\pm}9.46kg$) were blocked by body weight and randomly allocated to IRQ (n = 8) and PRQ (n = 8). Two sheep were slaughtered for each sampling time in each treatment (IRQ and PRQ) at 0, 6, 12, and 24 h after feeding to determine rumen load. In experiment 2, eighteen goats ($25.4{\pm}9.08kg$) were blocked by weight and randomly allocated to IRQ (n = 6), SIRQ (n = 6), and PRQ (n = 6). Then all 18 goats were slaughtered soon after meal termination in the morning; afternoon and evening to determine the effect of period of day on rumen fill. Results: Rate of degradation and effective degradability were enhanced by improvement of roughage quality. Roughage quality had no effect on digestibility, but digestibility was higher in goats than sheep. Fractional passage rate of particles was higher for IRQ than PRQ, but similar for liquids. Digesta fractional clearance rates at 24 h after feeding were 0.018/h (IRQ) and 0.006/h (PRQ). Period of day had an influence on rumen load. Neutral detergent fibre load for goats were above 2.03 kg/100 kg body weight for all diet treatments. Conclusion: Following starvation, passage rate had negligible effects on emptying of rumen load.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.156-168
• /
• 1980

The air-center nozzles, being specially designed to supply air into the central part of water stream at seven levels of air volume, were tested for spray deposit pattern and flow-rate at each of the twelve pressure levels ranging from $0.35kg/cm^2$ (5 psi) to $6.33kg/cm^2$ (90 psi) in comparison with those of standard nozzles. The air-center nozzles produced comparatively more stable spray deposit patterns than the standard nozzles. The spray deposit patterns of the air-center nozzle were concentrated gradually in the central region with increase of air volume as a component of spray mixture. The degree of concentration of spray deposit on the central region from the air-center nozzle was higher than that of the standard nozzle, which suggested the possibility of obtaining farther travel distance spraying system at a given performance level. The flow rate of the air-center nozzle was not as much as that of the standard nozzle due to the air within certain limits. The rate of decrease of water flow became smaller with an increase in operating pressure although it changed rapidly in the beginning stage, ranging up to two or three percent of the air flow rate due to the compressive properties of air.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.215-220
• /
• 2007

The control of the surface energy by electrohydrodynamic force provides electrospraying with various potential advantages such as simple particle size control, mono-dispersity, high recovery, and mild processing conditions. The advantages are quite helpful to improve the stability of protein drug and control its release. Herein, the nano-encapsulation of protein drugs using electrospraying was investigated. Albumin as a model protein was processed using uniaxial and co-axial electrospraying, and chitosan, polycaporlactone (PCL), and poly (ethylene glycol) (PEG) were used as encapsulation materials. The major processing parameters such as the conductivity of spraying liquids, flow rate, the distance of electrical potential gradient, etc were measured to obtain the maximum efficiency. In the chitosan systems, mean particles size decreases as flow rate and the distance between nozzle and the collecting part decreases. In the uniaxial technique of the PCL systems, mean particles size decreases as flow rate decreases. In the coaxial technique of the PCL systems, it was found that the particles size gets larger under the application of the higher ratio of inner-to-outer liquid flow rates. The primary particles formed out of an electrospraying nozzle showed narrow particle size distribution, but once they arrived to the collecting part, aggregation behavior was observed obviously. Efficient nano-encapsulation of albumin with PCL, PEG, and chitosan was conveniently achieved using electrospraying at above 12 kV.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.478-483
• /
• 1995

To investigate the constituents of antimutagenic factor from brown rice, methanol extracts were fractionated into ether, ethylacetate, buthanol and aqueous fractions. The ether fractions showed distinct antimutagenic effect and active spot were selected by silica gel chromatography. The specific activity of active spot decreased with isolation of the active components from the methanol extract. Qualitative analyses of the active spot by using various spraying reagents revealed that ninhydrin and orcinol did not develop colored reactions. But, ferric chloride, 2,7-dichlorofluorescein, antimony pentachloride, phosphomolybdic acid, bromothymol blue and rhodamine 6G led to colored reactions. These results suggested that the consitituents of active material were neither polar nor nitrogen-containing compounds and that they may contain phenolic compounds and fatty acid derivatives. Main compounds of the active spot were analyzed to be o-hydroxy benzyl alcohol(saligenin), octanoic acid(caprylic acid), 9,12-cis-octadecadienoic acid(linoleic acid), 11-cis-octadecenoic acid(oleic acid), hexadecanoic acid(palmitic acid), 1H-indole-2-carboxylic acid and 1,2-benzenedicarboxylic acid(phthalate) in GC/Mass spectrum, and antimutagenicity of these active compounds using standard regeant was reconfirmed in S. typhimurium reversion assay.