• 한국축산식품학회지
• /
• 제34권5호
• /
• pp.576-581
• /
• 2014

Sodium chloride is an important ingredient added to most of foods which contributes to flavor enhancement and food preservation but excess intake of sodium chloride may also cause various diseases such as heart diseases, osteoporosis and so on. Therefore, this study was carried out to investigate the effect of monosodium glutamate (MSG) as a salty flavor enhancer on the quality and sensorial properties of the NaCl/MSG complex and actual food system. For characterizing the spray-dried NaCl/MSG complex, surface dimension, morphology, rheology, and saltiness intensity were estimated by increasing MSG (0-2.0%) levels at a fixed NaCl concentration (2.0%). MSG levels had no effect of the characteristics of the NaCl/MSG complex, although the addition of MSG increased the surface dimension of the NaCl/MSG complex significantly (p<0.05). Furthermore, the effect of MSG on enhancing the salty flavor was not observed in the solution of the NaCl/MSG complex. In the case of an actual food system, model meat products (pork patties) were prepared by replacing NaCl with MSG. MSG enhanced the salty flavor, thereby increasing overall acceptability of pork patties. Replacement of NaCl with MSG (<1.0%) did not result in negative sensorial properties of pork patties, although quality deterioration such as high cooking loss was found. Nevertheless, MSG had a potential application in meat product formulation as a salty flavor enhancer or a partial NaCl replacer when meat products were supplemented with binding agents.

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.866-877
• /
• 2018

Cheese emulsion is an intermediate product for the production of cheese powder and needs to be stable, homogeneous and pumpable characteristics to convey to the spray drier. This study was conducted to evaluate the effects of fat reduction and emulsifying salt (ES) amount in cheese emulsion systems on the physicochemical characteristics. Reduced-fat (RF) and full-fat (FF) white-brined cheese emulsions were produced with different dry matters (DM; 15%-25% excluding ES) and ES concentrations (0%-3% based on cheese weight). Stable cheese emulsion was obtained at lower DM in RF cheese emulsion than that of FF cheese emulsion. Reduction in the amount of ES resulted in instability of both emulsions. Apparent viscosity with pseudoplastic flow behavior significantly increased with the decrease of fat content in stable cheese emulsions. Microstructure of emulsions appeared to be related to the fat content, stability and degree of emulsification. Reduction of fat content caused to get less lightness and more greenness in color, whereas yellowness was significantly decreased by increase in the amount of ES. In conclusion, fat reduction resulted in higher viscosities of cheese emulsion due to inducing the increment of protein, and the addition amount of ES considered as very important factor to produce stable cheese emulsion without protein precipitation or cream separation. Therefore, for preparation of RF cheese emulsion using a variety of white-brined cheese, lower amounts of DM would be suggested in this study to obtain homogenous droplets in the atomizing process of spray drying.

• Applied Biological Chemistry
• /
• 제36권6호
• /
• pp.416-423
• /
• 1993

건조방법 및 원료성분을 달리하여 분유를 제조하고 이들분유의 몇 가지 리올로지 특성을 Instron Universal Testing Machine으로 측정하여 얻어진 결과는 다음과 같다. 드럼건조된 전지분유의 부피밀도는 $0.382\;g/cm^3$으로 탈지 및 조제 분유보다 높았고, 분무 건조된 탈지 분유의 Hausner ratio, 평정각 및 compressibility 는 각각 1.127, $32.5^{\circ}$, 0.029로 탈지 분유는 자유롭게 흐르는 것을 보여주었으며, 드럼건조된 전지분유의 compressibility는 수분 함량이 4.96%에서 3.89%로 감소함에 따라 0.079에서 0.052로 낮아졌다. 전지분유 그래뉼의 compressibility는 0.056으로서 분유의 compressibility보다 낮았다. 분무 건조된 분유는 구형으로서, 동결건조나 드럼건조된 분유보다 더 견고함을 나타냈다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권3호
• /
• pp.433-438
• /
• 2005

This investigation was undertaken in order to elicit the relationship between the extent of ultrafiltration processing of whey and its effect on composition and yield of resultant whey protein concentrate (WPC). Cheddar cheese whey was fractionated through ultrafiltration to an extent of 70, 80, 90, 95, 97.5% and 97.5% volume reduction followed by I stage and II stage diafiltration. After each level of ultrafiltration, the composition of WPC was monitored. Similarly, the initial whey was adjusted to 3.0, 6.2 and 7.0 pH levels and ultrafiltration was carried out to elicit the effect of pH of ultrafiltration on the composition. Further, initial whey was adjusted to different levels of whey protein content ranging from 0.5 to 1.0 per cent and subjected to ultrafiltration to different levels. The various range of retentate obtained were further condensed and spray dried in order to assess the yield of WPC per unit volume of whey used and the quantity of whey required to produce unit weight of product. With the progress of ultrafiltration, there was a progressive increase in protein content and decrease in lactose and ash content. The regression study led to good relationships with $R^2$ values of more than 0.95 between the extents of permeate removed and the resultant changes in composition of each of the constituents. Whey processed at pH 3.0 had significantly a very low ash content and high protein content as compared to processing at 6.2 and 7.0. The yield of WPC per unit volume of whey varied significantly with the initial protein content. Higher initial protein content led to higher yield of all ranges of WPC and the quantity of whey required per unit weight of spray dried WPC significantly reduced. Regression equations establishing the relationship between initial protein content of whey and the yield of various types of WPC have been derived with very high $R^2$ values of 0.99. This study revealed that, the yield and composition of whey can be monitored strictly by controlling the processing parameters and WPC can be produced depending on the food formulation requirement.

• 한국축산식품학회지
• /
• 제30권4호
• /
• pp.661-668
• /
• 2010

This study was carried out to optimize microencapsulation conditions for Inonotus obliquus extract powder with mediumchain triacylglycerol (MCT) using response surface methodology (RSM), and to determine the possibility of adding encapsulated I. obliquus extract to milk toward improving the functionality of milk. and to investigate the effects of added encapsulated I. obliquus extract on the physicochemical and sensory properties of the product. The microencapsulation efficiency of I. obliquus extract powder was investigated with respect to three variables (ratios of core material to coating material, amounts of water added, and spray pressure) in RSM. The optimal conditions for microencapsulation of I. obliquus extract powder were obtained from the ratio of core material to coating material (2.92:10) and the amount of water added (0.5 mL); the spray pressure had an insignificant effect on the microencapsulation (p<0.05). Adding encapsulated I. obliquus extract into milk did not significantly affect either color (L, a and b values) or thiobarbituric acid (TBA) values. Sensory test revealed that there were significant improvements in brownish, herb flavor, and bitterness scores for encapsulated I. obliquus extract-added milk as compared with those for uncapsulated I. obliquus extract-added milk. Based on the data obtained from the present study, it is concluded that microcapsules of I. obliquus extract powder could be applicable to milk without remarkably adverse effects on physicochemical and sensory properties

• 아태비즈니스연구
• /
• 제6권2호
• /
• pp.19-33
• /
• 2015

Studies focusing on the constantly changing buying behavior and product preferences of a booming teen market are rare and this is particularly true in the Philippines. To address this gap in the literature, this study focused on the supermarket brands of cologne preferred by teens in the Philippines such as Lewis & Pearl (L&P), Johnson's Baby Cologne, Juicy, Bench, Ellips, Fiona, Bambini and Baby Flo which are manufactured by various competing companies. Essentially, this study presented and described the profile and buying behavior of cologne users and non-cologne users and determined whether preferential differences existed between these brands. The respondents consisted of 473 teens all over the Philippines stratified in terms of general location via the three major groups of islands in the Philippines: Luzon, Visayas and Mindanao. Respondents came from selected schools in Quezon City in Metro Manila, Sariaya in Quezon Province, Cebu City, and Digos City to represent the Greater Metro Manila Area, Luzon, Visayas and Mindanao, respectively. Findings showed that almost all of the respondents used cologne at varying degrees. In general, teens use several scents and brands of cologne and continually shift from one scent/brand to another scent/brand. This made it difficult for any company to capture loyal consumers. The most popular brands used by teenagers were Bench (61.7%), Lewis and Pearl (59%), Juicy (42%), Afficionado (32%), Fiona (19.3%), Penshoppe (18%), Bambini (12.6%), Ellips (11.3%) and Zen Zest (7.5%). Fragrance or scent is the top priority of teenagers in choosing a cologne brand, followed by brand name, affordability, bottle design and endorser. The spray bottle type of colognes is preferred even if cologne spray bottles are priced higher than the splash cologne bottle type. Managerial implications of these findings for market players, marketing scholars and prospective investors are presented.

• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.197-202
• /
• 2013

A novel route to prepare Nd-Fe-B magnetic particles by utilizing both spray drying and reduction/diffusion processes was investigated in this study. Precursors were prepared by spray drying method using the aqueous solutions containing Nd salt, Fe salt and boric acid with stoichiometric ratios. Precursor particles could be obtained with various sizes from 2 to $10{\mu}m$ by controlling concentrations of the solutions and the average size of $2{\mu}m$ of precursors were selected for further steps. After heat treatment of precursors in air, Nd and Fe oxides were formed through desalting procedure, followed by reduction processes in Hydrogen ($H_2$) atmosphere and with Calcium (Ca) granules in Argon (Ar) successively. Moreover, diffusion between Nd and Fe occurred during Ca reduction and $Nd_2Fe_{14}B$ particles were formed. With Ca amount added to particles after $H_2$ reduction, intrinsic coercivity was changed from 1 to 10 kOe. In order to remove and leach CaO and residual Ca, de-ionized water and dilute acid were used. Acidic solutions were more effective to eliminate impurities, but Fe and Nd were dissolved out from the particles. Finally, $Nd_2Fe_{14}B$ magnetic particles were synthesized after washing in de-ionized water with a mean size of $2{\mu}m$ and their maximum energy product showed 9.23 MGOe.

• 대한화장품학회지
• /
• 제42권1호
• /
• pp.1-7
• /
• 2016

본 연구에서는 분무 건조 공정을 이용하여 다공성 PMMA 입자 내부에 $TiO_2$ 나노입자가 고르게 함침된 유/무기 복합분체를 제조하여, $TiO_2$의 은폐력은 그대로 유지하면서도 다공성 구조체로 피지를 흡유하여 지속성을 증대시키는 메이크업 화장품 소재로서의 가능성을 확인하고자 하였다. 끓는점이 다른 두 가지 공용매(디클로로메탄 및 헥산올)의 비율과 고분자의 농도 조절을 통해 입자크기와 기공크기를 제어할 수 있었으며, $TiO_2$ 나노입자를 제조된 시료의 전체 무게 대비 74.6 wt%까지 함침 시킬 수 있었다. SEM 이미지 분석을 통하여 복합분체의 다공성 구조를 확인하였고, 절단면 이미지를 통하여 내부에 $TiO_2$ 나노입자가 균일하게 함침 되어 있는 것을 관찰하였다. EDX 매핑으로 Ti 원소가 복합분체의 내부에 전체적으로 분포하고 있음을 확인하였다. Porosimetry 분석으로 기공사이즈 및 공극률을 측정하였으며, $TiO_2$ 나노입자를 함침하고 있음에도 불구하고 50% 이상의 공극률을 유지하여 흡유량이 매우 뛰어남을 확인할 수 있었다. 결론적으로, $TiO_2$ 나노입자가 PMMA입자의 내부에 잘 분산되어 있어서 가시광선의 반사율을 증가시킴으로써 피부의 결점을 커버하는 성능이 개선되었음을 확인하였다.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.206-211
• /
• 2020

텅스텐 합금은 일반 산업분야 뿐만 아니라, 방산 분야에서도 다양하게 활용되고 있다. 방산 분야에 활용되는 일반적인 합금의 제조 방법은 주조를 통하여 제조된 합금을 단조, 압연, 압출 등의 1차 가공 후 원소재로 공급하여 제품을 생산 한다. 하지만, 텅스텐 합금은 주조 공정에 어려움이 있어 분말야금법을 활용하여 제품을 제작하고 있다. 분말야금법은 미세한 분말을 이용하여 기계적 물성과 생산성을 높일 수 있으나, 양산 단계에서 제품 간 편차를 유발할 수 있다. 미세한 분말의 장점과 제품 간 편차를 감소하기 위하여 각 장점을 갖는 과립분말 제조에 대한 연구가 필요하다. 본 연구에서는 볼밀을 이용하여 균질화를 시킨 텅스텐과 니켈, 철의 혼합분말을 용매인 순수에 투입하고 결합제인 PVA를 첨가하여 분무건조용 혼합액을 제조하였다. 혼합액을 분무건조기를 이용하여 과립분말을 제조하였고, 분말야금법의 성형 및 소결 공정 중 제품 간 편차를 줄일 수 있는 과립분말의 제조를 목표로 연구를 수행하였다. 과립 공정에서는 다양한 변수(혼합물의 농도, 결합제의 용량, 분무건조기의 건조 온도, 분무 회전 속도) 간 영향성을 확인하기 위하여 예비 실험을 실시하였다. 예비 실험 결과를 통해 분무건조용 혼합물의 용매의 용량을 독립변수로 본 실험을 수행하였고, 기존 양산 조건과 유사한 평균 입도를 가지며, 겉보기 밀도가 증가한 개선된 과립분말을 제조하였다. 추가적으로 성형 및 소결 공정에 대한 파일럿 시험을 진행하여 개선된 과립분말이 양산 제품의 특성 편차(중량 편차)를 감소하는 것을 확인하였다.

• 한국식품과학회지
• /
• 제42권1호
• /
• pp.39-44
• /
• 2010

본 연구에서는 원료의 전처리, 가수분해 방법, 농축과정 및 제형화 공정을 최적화하여 BCAA 함량이 증가된 옥수수 펩타이드 제조법을 확립하였다. 옥수수 글루텐의 단백질 회수율은 증자와 탄수화물 분해효소 처리 등의 전처리 과정에 의해 약 11% 정도 증가하였다. 가수분해 방법에서는 미생물을 배양하여 제조한 코지에 상업용 효소를 소량 혼합하여 반응시킨 가수분해물에서 향상된 유리아미노산 및 BCAA 함량을 얻을 수 있었다. 또한, 가수분해 반응액은 농축과 여과를 통해 BCAA의 함량이 약 100% 정도 향상되었다. 위의 조건에서 제조한 옥수수 가수분해 반응물의 분말화를 위해 분무건조기의 온도와 고결방지제 종류를 비교한 결과, inlet 온도 $185^{\circ}C$, outlet 온도 $80^{\circ}C$, 분산속도 18,000 rpm에서 2% maltodextrin을 사용 시 가장 좋은 상태의 분말 제품을 얻을 수 있었다. 이와 같은 가수분해 및 분말화 공정을 통해 단백질 이용률이 32%까지 향상되고, BCAA 함량이 전체 유리아미노산 대비 41%의 높은 비율로 구성되어 있는 옥수수 글루텐 가수분해물을 제조할 수 있었다. 이상과 같이, 본 연구에서는 옥수수 글루텐 가수분해물 제조를 위한 최적화 과정을 통해 BCAA가 풍부한 가수분해물 제조와 최종 제품의 품질 안정화 조건을 확립할 수 있었다. 또한, 본 연구에서 개발한 미생물(코지)과 효소를 동시에 사용하는 방법에 의하여 옥수수 글루텐을 가수분해하면 적은 양의 효소사용으로 유사한 유리아미노산 및 BCAA 함량을 나타내는 가수분해물을 얻을 수 있다. 따라서, 본 연구에서 개발한 옥수수 글루텐 가수분해물 제조공정은 매우 효율적이며, 경제적인 방법이라 할 수 있다.