• 한국표면공학회지
• /
• 제22권1호
• /
• pp.43-51
• /
• 1989

The characteristion of composite electroless Nikel palting on the condition of adding 3kinds ceramic dispersives, Al2O3, Si3O4 and artificial diamond powder were studied. Decreasing solution temperature for composite plating was required to depress the spontaneous decomposition caused by dispersive including enlargement of reaction surface. The rate of composite plating was faster than that of general electroless-Nickel plating without dispersive. this increasing tendency of plating rate was remarkable for the active catalysis, like diamond powder.

• Bulletin of the Korean Chemical Society
• /
• 제14권4호
• /
• pp.449-452
• /
• 1993

o-Aminophenols react with alcohols in the presense of a catalytic amount of ruthenium catalyst at 180$^{\circ}C$ to give 2-substituted benzoxazole in good yield. The yields of 2-substituted benzoxazoles were affected by the yield of N-alkylation compound from o-aminophenol and alcohol as starting materials. During the reaction, a stoichiometric amount of hydrogen was spontaneously evolved into the gas phase.

• Journal of Chest Surgery
• /
• 제12권1호
• /
• pp.16-22
• /
• 1979

Clinical evaluation of contact sensitization to 2, 4-dinitro-chlorobenzene [DNCB] was performed in 2 groups: group A [30 patients with non-malignant disease] and group B [30 patients with bronchogenic carcinoma]. Initial sensitization was elicited out by applying 2, 000 ug of DNCB to skin surface of the both group A and B. Subsequently a relatively weak challenge dose, 200 ug of DNCB, was applied 14 days later, showing the satisfactory results of sensitization with minimizing non-specific irritative inflammatory skin response. Delayed cutaneous hypersensitivity reactions shown by spontaneous flare phenomena appeared at the challenge site, and they were assessed 48 hours later. The reaction were graded from +1 to +4 according to the degree of flare or vesicular reaction. The results were as follows: 1. 28 cases [93%] of group A, however, only 18 cases [67%] of group B exhibited delayed cutaneous hypersensitivity reaction to DNCB contact sensitization [P<0.02]. 2. Of group A, the delayed cutaneous hypersensitivity reactions above +2 of DNCB score were 25 cases [83%], meanwhile 11 cases [37%] in group B [P<0.001]. 3. Undifferentiated carcinomas showed highest incidence of anergy to DNCB contact sensitization in the all histologic types of group B. 4. In group B, 8 [42%] of 19 cases who react to DNCB were resectable, whereas only 2 [18 %] of 11 cases who failed to react to DNCB were resectable for curative cancer surgery. These study suggests that cellular immune reaction of group B was depressed remarkably comparing with that of group A.

• 한국임상약학회지
• /
• 제19권2호
• /
• pp.159-166
• /
• 2009

The purpose of this study was to evaluate the attitude and knowledge of community pharmacists to spontaneous adverse drug reaction (ADR) reporting. A survey was conducted in 103 community pharmacists in Seoul and Kyung-Gi Province from September to October, 2009. Almost half (53, 51.5%) and three-fourths (79, 76.7%) of respondents knew they could participate in ADR reporting in the Regional Pharmacovigilance Center (RPC) or Korean Food and Drug Administration (KFDA). However, only three of them have reported an ADR to the RPC and none of them have reported to KFDA. A majority of the respondents (96, 93.2%) felt that ADR reporting was a professional obligation for pharmacists. The purpose of an ADR reporting was incorrectly identified by most pharmacists. ADR reporting was encouraged if the reaction was serious and a new product. The most frequently mentioned barriers to reporting were: uncertainty concerning the causal relationship (86.3%) and not knowing how to report an ADR (83.2%). Only 19 (18.4%) respondents had received education on how to report ADR. Education was the most recognized method of improving ADR reporting. This study showed the knowledge of ADR reporting among community pharmacists is inadequate. Education and training should be reinforced in order to improve ADR reporting by community pharmacists.

• Bulletin of the Korean Chemical Society
• /
• 제22권1호
• /
• pp.53-58
• /
• 2001

Sulfonated poly(phenylene sulfide) (SPPS) polymers were prepared by sulfonation of poly[methyl[4-(phenylthio) phenyl]sulfonium trifluoromethanesulfonate] (PPST) with fumic sulfonic acid (10% $SO_3-H_2SO_4$) and demethylation with aqueous NaOH solution. The equilibrium constants of ion exchange reactions between alkali metal cations ($Li^+,\;Na^+,\;and\;K^+$) and SPPS ion exchanger in organic solvents such as tetrahydrofuran (THF) and dioxane were measured. The equilibrium constants of ion exchange reactions increased as the polarity of the solvent increased, and the reaction temperature decreased. The equilibrium constants of the ion exchange reaction ($K_{eq}$) also increased in the order of $Li^+,\;Na^+,\;and\;K^+$. To elucidate the spontaneity of the exchange reaction in organic solvents, the enthalpy, entropy, and Gibbs free energy were calculated. The enthalpy of reaction ranged from -0.88 to -1.33 kcal/mol, entropy ranged from 1.42 to 4.41 cal/Kmol, and Gibbs free energy ranged from -1.03 to -2.55 kcal/mol. Therefore, the exchange reactions were spontaneous because the Gibbs free energies were negative. The SPPS ion exchanger and alkali metal ion bounding each other produced good ion exchange capability in organic solvents.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3329-3334
• /
• 2007

The purpose of the research is to investigate of diesel spray combustion for simultaneously reduce way NOx and PM. The pressure diesel injection were done into intermediates that are generated by very lean DME HCCI combustion using a RCM. The concentration of intermediate could not be directly measured; we estimated it by CHEMKIN calculation. DME HCCI characteristic is surveyed. Validations of the CHEMKIN calculation were confirmed pressure rise of an experiment and pressure rise of a calculation. Using a framing streak camera captured two dimensional spontaneous luminescence images from chemical species at low temperature reaction(LTR) and high temperature reaction (HTR). Also, the combustion events were observed by high-speed direct photography, the ignition and combustion were analyzed by the combustion chamber pressure profiles.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.985-994
• /
• 1996

The initiation and growth of $\alpha$-Al2O3/metal composites by the directed oxidation of molten commercial AlZnMg-alloy at 1223-1423K were investigated. Spontaneous bulk growth did not occur on the alloy alone. but the uniform initiation and growth of the composite were obtained by putting a thin layer of SiO2 particles on the surface of the alloy. Without SiO2 the external surface of the oxide layer was convered by MgO and MgAl2O4. But with the SiO2 reaction initiate the porous ZnO layers were found on the growth surface. The higher process temperature yielded a lower metal content. The oxidation product of $\alpha$-Al2O3 was found to be oriented with c-axis parallel to th growth direction. The growth rates increased with temperature and the apparent activation energy was 111.8 kJ/mol.

• Composites Research
• /
• 제12권3호
• /
• pp.36-44
• /
• 1999

In-situ process에 의한 $Al_2O_{3p}/Al$기 복합재료 제조시, Mg의 첨가형태와 함량, 공정온도 및 유지시간이 응용Al의 침투거동과 미세조직 및 경도에 미치는 영향을 조사하였다. Mg분말과 $Al_2O_3$입자의 혼합분말에 순 Al을 침투시켜 복합재를 제조하는 경우, 침투율에 영향을 주는 가장 유력한 변수는 Mg분말의 함량이며, Mg의 활발한 반응으로 $700^{\circ}C$의 낮은 온도에서도 침투가 가능했다. 한편 Al-Mg합금을 $Al_2O_3$입자에 침투시켜 복합재를 제조하는 경우 Mg함량과 공정온도에 관계없이 거의 동일한 침투율을 나타냈으며 침투 가능한 공정온도는 $800^{\circ}C$이었다. Mg과 $Al_2O_3$의 혼합분말로 제조한 복합재가 Al-Mg합금으로 제조한 복합재 보다 월등히 높은 경도를 나타냈으나, 과도한 계면방응에 의한 불균일한 강화상의 분산으로 경도의 산포도는 컸다.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1161-1170
• /
• 2013

The efficiency of coal-based activated carbon in removing methylene blue (MB) and phenol from aqueous solution was investigated in batch experiments. The batch adsorption kinetics were described by applying pseudo-first-order, pseudo-second-order, and first order reversible reaction. The results showed that the adsorption of MB and phenol occurs complexed process including external mass transfer and intraparticle diffusion. The maximum adsorption capacity obtained from Langmuir isotherm was 461.0 mg/g for MB and 194.6 mg/g for phenol, respectively. The values of activation parameters such as free energy (${\Delta}G^0$), enthalpy (${\Delta}H^0$), and entropy (${\Delta}S^0$) were also determined as -19.0~-14.9 kJ/mol, 25.4 kJ/mol, and 135.2 J/mol K for MB and 51.8~54.1 kJ/mol, -29.0 kJ/mol, and -76.4 kJ/mol K for phenol, respectively. The MB adsorption was found to be endothermic and spontaneous process. However, the CV adsorption was found to be exothermic and non-spontaneous process.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.219-222
• /
• 2004

Removal characteristics of Mn and Co was studied from the contaminated solutions via surface reaction with various calcium carbonate (calcite). Synthetic calcium carbonates which has different surface morphology as well as surface areas were prepared by a spontaneous precipitation method and used. Mn and Co removal behavior by the different solid surface demonstrate characteristic sorption behaviors depend on the type of calcite used, such as surface area or surface morphology. Calcium carbonate crystals (mostly calcite) which exhibit complicated surface morphology (c-type) shows strong sorption affinity for Mn and Co removal via sorption than on the a-type or b-type calcite crystals of less complicated surfaces. The applicability of two kinetic models, the pseudo-first-order kinetic equation and the Elovich kinetic model was examined on these sorption behavior. Elovich kinetic model was found more suitable to explain the very early stage adsorption kinetics, while the pseudo-first-order kinetic equation was successfully fitted for the adsorption kinetics after 50 hours.