• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.13-16
• /
• 2003

In this work, we have studied about an RSFQ (Rapid Single Flux Quantum) switch element. The circuit was designed, simulated, and laid out for mask fabrication. The switch cell was composed of a D flip-flop, a splitter, a confluence buffer, and a switch core. The switch core determined if the input data could pass to the output. “On” and o“off” controls in the switch core could be possible by utilizing an RS flip-flop. When a control pulse was input to the “on” port, the RS flip-flop was in the set state and passed the input pulses to the output port. When a pulse was input to the “off” port, the RS flip-flop was in the reset state and prevented the input pulses from transferring to the output port. We simulated and optimized the switch element circuit by using Xic, WRspice, and Julia. The minimum circuit margins in simulations were more than $\pm$20%. We also performed the mask layout of the circuit by using Xic and Lmeter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.794-798
• /
• 1992

We present an optical Voltage and current sensor using $BSO(Bi_{12}SiO_{20})$ monocrystal. The voltage and current sensor consist of PBS(Polarizing Beam Splitter), 1/4 wavelength plate, ZnSe, Selfoc lens, LED, and PIN-PD etc. Magnetic core was made using permalloy for applying magnetic field to current sensor effectively. Current was measured from 100 to 1,600 ampere and accuracy was about ${\pm}$5%. The accuracy could be improved to ${\pm}$l% after reducing the nonlinear property of BSO crystal using our own program in PC (IBM286). We noticed that these data were not influenced by 154,000 voltage at all. Applied voltage was reduced to 1/20 using capacitors. And experiment was carried out up to 450V of the reduced voltage. The data fran optical voltage sensor was similar to that from conventional voltage sensor. The accuracy of the data was within about ${\pm}$1%.

• 화약ㆍ발파
• /
• 제16권3호
• /
• pp.16-24
• /
• 1998

Methods of Rock fragmentation are used rock of housing repair development at KU-SAN DONG area in seoul Youn-Pyong Ku. So, Theorical analyses of the effect of vibration and frequency on structural damage around old housed also discussed. The results can be summarized as follows: 1. A area(Rock area not more than 15m Ku-San Mention) Some Empirical equations were obtained $V=K\{{\frac{D}{W}}1/3\}^{-n}$ where the values for n and K are estimated to be -1.64 and 94 respectively, this values were obtained only theorical analyses. If we have 125g charge this area is impossible blasting operation, so this area must be worked by SRS(Super Rock Splitter) method. 2. B area(Rock area from 15m to 25m in a boundary line from Ku-San Mention) This area charge is about 125g in a delay time by some empirical equation s. So, this area can be blasting operations by small charge. 3. C area(Rock area from 25m to 35m in a boundary line from Ku-San Mention) This area charge is about 500g in delay time by some empirical equation s. So, this area can be blasting operations by middle charge. 4. D area(Rock area more then 35m in a boundary line from Ku-San Mention) This area charge is about 1000g in a delay time by some empirical equation s. So, this area can be blasting operations by middle charge.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.107-113
• /
• 2017

This paper deals with the traffic factors related to the collisions of circular intersections. The purpose of this study is to develop traffic accident models by type of collision based on land use. In pursuing the above, the traffic accident data from 2010 to 2014 were collected from the "Traffic Accident Analysis System (TAAS)" data set of the Road Traffic Authority. A multiple regression model was utilized in this study to develop the traffic accident models by type of collision. 17 explanatory variables such as geometry and traffic volume factors were used. The main results are as follows. First, the null hypothesis that the type of land use does not affect the number of accidents by type of collision is rejected. Second, 10 accident models by type of collision based on land use are developed, which are all statistically significant. Finally, the ADT, inscribed circle diameter, bicycle lane, area of central island, number of speed hump, circulatory roadway width, splitter island, area of circulatory roadway, mean number of entry lane and mean width of entry lane are analyzed to see how they affect accident by type of accident based on land use.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2691-2695
• /
• 2009

오늘날 광통신 시스템은 거의 무한대의 대역폭을 지니게 되었으며 이를 통하여 다양한 멀티미디어 데이터들을 신속하게 전송하는데 사용되고 있다. 이러한 광통신 시스템 하에서 텍스트, 이미지 및 동영상 등 다양한 멀티미디어 데이터들을 송수신 하기 위해서는 통합된 통신서비스시스템의 사용이 필수적이다. 본 논문에서는 멀티 비디오데이타와 오디오 데이타를 한가닥의 광통신 라인으로 주고받을 수 있도록 해주는 광 MVAD(Multi-Video Audio Data)쌍방향 다채널 링크시스템을 개발하였다. 개발된 광링크 시스템은 오직 하나의 광케이블을 사용하여 광통신시스템을 구축 할 수 있으며 우수한 영상과 음향을 공급하는 광섬유 매개체로 인하여 다양한 분야에 적용이 가능하다.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.10-15
• /
• 2013

In this paper, we propose a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure (PDLS), which has flat-top pass bands and multiwavelength switching capability. Generally, the PDLS can remove the dependency of the filter on input polarization. The proposed filter is composed of a polarization beam splitter, two half-wave plates (HWPs), and two polarization-maintaining fiber loops concatenated with a $60^{\circ}$ offset between their principal axes. By controlling two HWPs, it can operate in a flat-top band mode or a lossy flat-top band mode with an inherent insertion loss of ~3.49dB. In particular, flat-top bands can be interleaved in both modes, which cannot be realized in a Lyot-Sagnac comb filter based on a fiber coupler. Compared with Solc-type high-order comb filters with the same order, the proposed filter shows sharper transition between pass and stop bands.

• 한국도로학회논문집
• /
• 제20권2호
• /
• pp.67-74
• /
• 2018

PURPOSES : The goal of this study is the development of roundabout accident models for urban and non-urban areas. METHODS : This study performed a comparative analysis of the regional factors affecting accidents. Traffic accident data were collected for the period 2010~2014 from the TAAS data set of the Road Traffic Authority. To develop the roundabout accident models, the Poisson and negative binomial regression models were used. A total of 25 explanatory variables such as geometry, and traffic volume were used. RESULTS : The key findings are as follows: First, it was found that the null hypotheses that the number of accidents is the same should be rejected. Second, three Poisson regression accident models, which are statistically significant (${\rho}^2$ of 0.154 and 0.385) were developed. Third, it was noted that although the common variable of the three models (models I~III) is the number of entry lanes, the specific variables are entry lane width, roundabout sign, number of circulatory roadways, splitter island, number of exit lanes, exit lane width, number of approach roads, and truck apron. CONCLUSIONS : The results of this study can provide suggestive countermeasures for decreasing the number of roundabout accidents.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.109-114
• /
• 2009

The dominant heating system used in Korean residential apartment buildings is a hydronic radiant floor heating system, known as the Ondol system. The most common control strategy applied to this traditional hydronic radiant system is a simple on-off control that intermittently supplies "hot water of a fixed temperature" at a "constant flow rate" to each room. However, the current problems with the aforementioned control are as follows: (1) since the simple on-off control is usually based on a one point measured temperature (a signal from a thermostat installed in a living room) in each dwelling unit, heating energy use for unoccupied rooms as well as a difference in temperatures between spaces (master bedroom, living room, bedroom1, bedroom2) can occur occasionally. (2) the most widely used residential water splitter has static valves, and is thus not able to change the flow rate to each room depending on the space heating load. In other words, the ratio of flow rates to rooms is fixed after construction, resulting in over- or under-heating and an improper use of energy. The aim of this paper is therefore to investigate the differences in the system's performance between control strategies in terms of the flow rate control and sensor location. It is shown that energy savings of control strategies are strongly influenced by occupant schedule.

• 미술이론과 현장
• /
• 제10호
• /
• pp.133-158
• /
• 2010

Der Beitrag befasst sich mit der partizipatorischen Inszenierung von Medienkunst im $\"{o}$ffentlichen Raum. Das Medienkunstprojekt' Energie-Passagen' von Monika Fleischmann und Wolfgang Strauss ist ein Ausdruck des Ubergangs zwischen realer und virtueller $\"{U}$mgebung. In der Verbindung von physikalischem Raum und digitalen Artefakten er$\"{o}$ffnet die Installation einen real/virtuell $\"{u}$berlagerten Wahrnehmungsraum und misst die Energie der Stadt auf metaphorische Weise. Die gemeinsame Erfahrung des Lesens und Schreibens t$\"{a}$glicher Nachrichten und ihrer Transformation in ein Sprachspiel assoziativer Splitter und Plateaus zu einer rhizomatischen Verweisstruktur bestimmt die interaktive Handlung. Das Publikum wird zu kommunikativer Performanz eingeladen und die Interaktivit$\"{a}$t des Geschehens wird als Statistik der Ereignisse im Internet dokumentiert und als Energie-Bild der Stadt visualisiert. Inszeniert als ein Fluss von Worten, wird die Installation zu einem begehbaren Informationsbrowser, der zum Flanieren in den Nachrichten einl$\"{a}$dt. Die Idee einer Mixed-Reality-B$\"{u}$hne bestimmt den interaktiven Denkraum zum Lesen und Be-Schreiben der Stadt.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.286-291
• /
• 2013

홈 CATV 네트워크는 동축 케이블과 이상적인 특성을 만족하지 못하는 신호 분배기로 구성되며, 케이블 설치시 원치 않은 묶임이나 구부러짐 그리고 케이블 연결 부위의 문제점 등이 발생할 수 있다. 또한 케이블 커넥터의 배치에 따라 발생할 수도 있는 이러한 문제점은 신호 누설의 원인이 될 수 있고, 네트워크의 성능을 악화시키는 원인이 되기도 한다. 본 논문에서는 RG-59, RG-6 동축 케이블 등과 같은 차폐 케이블이나 신호 분배기 에서의 신호 누설 및 전파 문제를 분석하고, 이상적인 CATV 홈 네트워크 구축 방법을 설명한다.