• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권5호
• /
• pp.311-319
• /
• 2012

Purpose: The aim of this study is to evaluate the vertical changes of the lip and perioral soft tissue, following orthognathic surgery in skeletal class III patients by a cephalometric analysis of a cone beam computed tomography (CBCT). Methods: A total of 20 skeletal class III patients, who had bimaxillary surgery with Le Fort 1 osteotomy and bilateral sagittal split ramus osteotomy, were included in this study. The surgical plan for maxilla was posterosuperior impaction with the anterior nasal spine, as the rotation center. Further, the surgical plan for mandible was also posterosuperior movement. The soft tissue changes between lateral cephalogram and CBCT were compared. And the correlations between independent variables and dependent variables were evaluated. Results: There were no significant differences of the soft tissues changes between lateral cephalogram and CBCT. Upper lip philtrum length (SnLs), nasolabial angle increased and upper lip vermilion length (LsStms), lower lip length (StmiB'), lower lip vermilion length (StmiLi), lower lip philtrum length (LiB') and soft tissue lower facial height (SnMe') decreased after surgery. Change of SnLs (${\Delta}$SnLs) was influenced by vertical change of menton (${\Delta}$MeV), and change of LsStms (${\Delta}$LsStms) was influenced by upper lip thickness (ULT). Change of StmiLi' (${\Delta}$StmiLi') were influenced by preoperative overjet. Change of StmiB' (${\Delta}$StmiB') were influenced by preoperative overjet, vertical change of lower incisor (${\Delta}$L1V) and horizontal change of posterior nasal spine (${\Delta}$PNSH). Change of LiB' (${\Delta}$LiB') was influenced by ${\Delta}$L1V and ${\Delta}$PNSH. Change of SnMe' (${\Delta}$SnMe') was influenced by ${\Delta}$MeV, horizontal change of upper incisor (${\Delta}$U1H) and horizontal change of lower incisor (${\Delta}$L1H). ${\Delta}$Nasolabial angle was influenced by change of ULT (${\Delta}$ULT). Conclusion: Both soft tissues and hard tissues can be evaluated by CBCT. Posterosuperior rotation of maxillomandibular complex resulted in increase of upper lip philtrum length and nasolabial angle, while the upper lip vermilion length, lower lip philtrum length, lower lip vermilion length, and soft tissue lower facial height showed a decrease.

• 수산해양기술연구
• /
• 제35권4호
• /
• pp.404-409
• /
• 1999

The in situ target strengths of, maurolicus muelleri were measured by the split beam echo sounder system at the frequency of 38kHz.Target strengths were measured during the night time in order to obtain the pure separated echoes from the scattered individual. And also it was to establish reasonable threshold due to taking the signals like as the planktons and etc.Since Maurolicus muelleri is a typical micronektonic fish, they mainly consisted of deep scattering layers(DSLs), and had a vertical migration perrodically during daytime and at night.We found that the Maurolicus muelleri occupied about 99% of total catch. Total length ranged from 4.5 to 5.7cm with a mean of 5.2cm and a standard deviation of 0.22cm.The target strengths of Maurolicus muelleir ranged from -60.4 to - 52.7dB and -59.2 to - 52.5 dB in the water layer of 10~30m and 30~50m depth, perspectively. Mean target strength was -57.1dB/fish and -28.5dB/kg. The target strength had the relation with the total length of the fish as, TS=20logL-71.4.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.551-555
• /
• 2014

ADCPs have been widely used to estimate the dynamic characteristics and biomass of sound scattering layers (SSLs), and swimming speed of fish schools for analyzing SSLs spatial distribution and/or various behavior patterns. This result showed that the verification of the mean volume backscattering strength (MVBS or averaged SV, dB) acquired by the ADCP would be necessary for a quantitative analysis on the spatial distribution and the biomass estimation of the SSLs or fish school when ADCP is used for estimating their biomass. In addition, the calibrated sphere method was used to verify values of each MVBS obtained from 4 beams of ADCP (153.6 kHz) on the base of 3 frequencies (38, 120, 200 kHz) of Scientific echo sounder's split beam system. Then, the measured SV values were compared and analyzed in its Target Strength (TS, dB) values estimated by a theoretical acoustic scattering model.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.427-434
• /
• 2014

Although ex situ target strength (TS) measurements using dual- and split-beam systems have become the primary approach of estimating fish abundance, theoretical model estimation is a powerful tool for verifying the measurements, as well as for providing values when making direct measurements is difficult. TS values for 20 samples of live bambooleaf wrasse (Pseudolabrus japonicus) whose target length (TL) ranged between 13.7 and 21.3 cm were estimated theoretically using the Kirchhoff-ray mode model, and the TS values for 18 live fish samples were additionally measured at ${\sim}0^{\circ}$ tilt angle to the swimming aspect using a tethered method at a frequency of 120 kHz to verify the theoretical values. The digitizing intervals used to extract the fish body and swim bladder morphology in the X-ray photographs significantly affected the calculated TS patterns, but variations based on the speed of sound and density ratio values for the general range of fish flesh were relatively small (within 1 dB). Close agreement was observed between the measured and theoretical TS values, and the correlation between the average TS and body length of the fish could be calculated accurately as <$TS_{120kHz}$>= 20logTL (cm) -71.6 using the theoretical method.

• Smart Structures and Systems
• /
• 제9권5호
• /
• pp.461-472
• /
• 2012

This study proposes an optics-based active sensing system for continuous monitoring of underground pipelines in nuclear power plants (NPPs). The proposed system generates and measures guided waves using a single laser source and optical cables. First, a tunable laser is used as a common power source for guided wave generation and sensing. This source laser beam is transmitted through an optical fiber, and the fiber is split into two. One of them is used to actuate macro fiber composite (MFC) transducers for guided wave generation, and the other optical fiber is used with fiber Bragg grating (FBG) sensors to measure guided wave responses. The MFC transducers placed along a circumferential direction of a pipe at one end generate longitudinal and flexural modes, and the corresponding responses are measured using FBG sensors instrumented in the same configuration at the other end. The generated guided waves interact with a defect, and this interaction causes changes in response signals. Then, a damage-sensitive feature is extracted from the response signals using the axi-symmetry nature of the measured pitch-catch signals. The feasibility of the proposed system has been examined through a laboratory experiment.

• ETRI Journal
• /
• 제18권3호
• /
• pp.171-179
• /
• 1996

Fully passivated low noise AlGaAs/InGaAs/GaAs pseudomorphic (PM) HEMT with wide head T-shaped gates were fabricated by dose split electron beam lithography (DSL). The dimensions of gate head and footprint were optimized by controlling the splitted pattern size, dose, and spaces of each pattern. We obtained stable T-shaped gate of $0.15{\mu}m$ gate length with $1.35{\mu}m-wide$ head. The maximum extrinsic transconductance was 560 mS/mm. The minimum noise figure measured at 18 GHz at $V_{ds}=2V andI_{ds}=17mA$ was 0.41 dB with associated gain of 8.19 dB. At 12 GHz, the minimum noise figure and an associated gain were 0.26 and 10.25 dB, respectively. These noise figures are the lowest values ever reported for GaAs-based HEMTs. These results are attributed to the extremely low gate resistance of wide head T-shaped gate having a ratio of the head to footprint dimensions larger than 9.

• 수산해양기술연구
• /
• 제55권1호
• /
• pp.39-49
• /
• 2019

Acoustics are increasingly regarded as a remote-sensing tool that provides the basis for classifying and mapping ocean resources including seabed classification. It has long been understood that details about the character of the seabed (roughness, sediment type, grain-size distribution, porosity, and material density) are embedded in the acoustical echoes from the seabed. This study developed a sophisticated yet easy-to-use technique to discriminate seabed characteristics using a split beam echosounder. Acoustic survey was conducted in Tongyeong waters, South Korea in June 2018, and the verification of acoustic seabed classification was made by the Van Veen grab sampler. The acoustic scattering signals extracted the seabed hardness and roughness components as well as various seabed features. The seabed features were selected using the principal component analysis, and the seabed classification was performed by the K-means clustering. As a result, three seabed types such as sand, mud, and shell were discriminated. This preliminary study presented feasible application of a sounder to classify the seabed substrates. It can be further developed for characterizing marine habitats on a variety of spatial scales and studying the ecological characteristic of fishes near the habitats.

• 한국콘텐츠학회논문지
• /
• 제6권12호
• /
• pp.261-268
• /
• 2006

일반인들이 '3차원업체영상'이라고 알고있는 홀로그램은 1947년 데니스가보 (D.Gabor)가 최초로 발견한 빛의 정보를 기록할 수 있는 특징을 가진 새로운 매체이다. 홀로그램은 물체에서 나오는 두 가지 파장의 간섭결과로서 이룩되는 간섭무늬를 기록하는 것으로 물체의 입체감 표현뿐만 아니라 빛과 공간 조형의 표현이 가능하기 때문에 시각적으로 한층 더 나은 결과를 기대할 수 있다. 홀로그램과 광고의 접목을 가정하여 기존광고매체와 홀로그램광고매체의 시각인지도를 측정 분석하여 홀로그램 광고는 기본방식의 광고보다 시각적 인지도가 높을 것인가에 대하여 알아보고, 하이테크 시대에 부합하는 새로운 광고매체로서, 홀로그램이 소비자에게 시각적으로 주의와 흥미를 유발하는데 우수하여 제3의 시각적 광고매체의 형태로 발전 가능성이 있는지에 대하여 알아본다.

• 한국도로학회논문집
• /
• 제5권3호
• /
• pp.11-20
• /
• 2003

교량, 도로, 공항 및 해양구조물 등은 반복하중을 받게 되는 대표적 토목구조물이다. 특히 공항이나 도로포장체는 휨에 의한 인장에 의해 파괴되기 때문에 사용재료의 특성에 기초한 피로수명의 고찰은 매우 중요하다. 따라서, 이 논문에서는 포장 콘크리트의 피로수명을 주요 실험변수에 따라 실험하고 실험방법에 따라 비교 분석하고자 하였다. 피로실험은 쪼갬인장 피로실험 ($\phi150mm{\times}75mm$)과 휨인장 피로실험 ($150mm{\times}150mm{\times}550mm$) 방법을 적용하여 하중재하 속도(1, 5, 10, 20Hz), 하중재하 형상(사각파, 정현파, 삼각파). 시험체의 습윤조건(건조상태 습윤상태) 및 양생기간(28일, 56일)을 주요 실험변수로 하여 수행하였다. 실험결과 하중재하 속도가 느릴수록 피로수명은 현저히 감소하는 것으로 나타났으며, 하중재하 속도가 빠를수록 피로수명은 증가하는 것으로 나타났다. 하중재하 형상에 따라서는 정현파를 기준하여 사각파에서는 피로수명의 급격한 감소를 나타냈으며 삼각파에서는 피로수명이 증가하는 것으로 나타났다 또한, 시험체의 습윤조건에 따라서는 건조상태에 비하여 습윤상태에서는 피로수명이 감소하였으며, 양생기간에 따라서는 재령 28일에서 56일로 증가함에 따라 피로수명이 증가함을 나타내었다.

• 대한토목학회논문집
• /
• 제29권5A호
• /
• pp.543-550
• /
• 2009

본 연구에서는 재활용된 폴리에틸렌 테레프탈레이트(polyethylene terephthalate; PET)로 만든 플라스틱 단섬유의 구조재료로서의 사용 가능성을 조사하였다. 성능을 검증하기 위해서 가장 널리 상용되는 합성섬유인 폴리프로필렌(polypropylene; PP) 섬유와 비교하였으며, 섬유의 혼입률을 0%, 0.5%, 0.75%, 1.0%로 변화시켜 혼입률에 따른 영향을 함께 검토하였다. 실험으로는 압축강도, 쪼갬인장강도 등의 재료 특성과 재생 PET(recycled PET fibers; RPET) 섬유가 혼입된 RC 부재에서의 극한성능과 연성을 평가하기 위해 RC보의 휨 실험을 수행하였다. 실험결과, 압축강도는 섬유의 혼입량이 증가함에 따라 감소하였으나, 기존 PP섬유와 유사하였다. 반면 쪼갬인장강도는 약간 증가하는 경향을 보였다. 구조 부재에 적용하였을 경우에는 RPET을 혼입한 RC 보의 극한강도, 상대 연성비, 에너지 흡수능력이 OPC 시편에 비해 확연히 증가되는 것을 알 수 있었다. 극한 휨강도와 연성비가 증가하는 현상은 PP 섬유를 혼입한 콘크리트에서도 유사하게 나타났다. 따라서 RPET 섬유는 콘크리트 부재의 보강섬유로 유용하게 사용될 수 있을 것이다.