• 한국인쇄학회지
• /
• 제9권1호
• /
• pp.1-11
• /
• 1991

In this reseach, double-layered photoconductor consist of the carrier generation layer(CGL) of $\varepsilon$ type copper phthalocyanine thin film by an aqueous coating method and the carrier transport layer(CGL) of polyvinyl carbazol(PVK) by spin coating. We inverstigated effect of the surfactant solution and cathod electrolysis to the crystal type of $\varepsilon$-CuPc in CGL with TEM, SEM and X- ray diffraction spectroscopy and studied the mechanism of an aqueous coating for the preparation of CGL. The effect of the washing of CGL about the electrophotographic characteristics of the $\varepsilon$-CuPc/PVK doublelayered photoconductors is studied also.

• Bulletin of the Korean Chemical Society
• /
• 제11권2호
• /
• pp.85-88
• /
• 1990

The electron paramagnetic resonance (EPR) spectrum of the copper (II) complex with the 2-methylamino-1-cyclo-pentene-1-dithiocarboxylate (acdc) anion, $Cu(N-CH_3acdc)_2$ has been studied in the diamagnetic host lattices afforded by the corresponding divalent nickel, zinc, cadmium and mercury complexes. EPR parameters of the complex support the exclusive use of sulfur atoms by the ligand in metal binding. A combination of host lattice structure and covalency effects can be account for the observed spin-Hamiltonian parameters.

• Journal of Magnetics
• /
• 제5권1호
• /
• pp.9-12
• /
• 2000

Electron spin resonance and magnetization measurements were carried out on $La_0.7Ca_0.3MnO_3$ in the ferromagnetic as well as paramagnetic phases. Evidence of an inhomogeneous magnetic structure, consisting of ferro-magnetic microregions embedded in an antiferromagnetic matrix near $T_c$, as well as similar local magnetic structures above and below $T_c$, were found.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.115.1-115.1
• /
• 2008

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.146.1-146.1
• /
• 2008

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.147.1-147.1
• /
• 2008

• 한국자기학회지
• /
• 제12권1호
• /
• pp.24-29
• /
• 2002

반강자성 FeMn과 강자성 Co를 이용한 기판/Co/Cu/Co/FeMn 구조의 스핀밸브를 제조하여 자기저항 특성을 조사하였다. Cu를 하지층으로 하여 FeMn 반강자성층을 형성시킨 결과 ${\gamma}$y-FeMn과 고착층 Co와의 교환이방성 결합이 향상되었다. FeMn증착시 Ar 압력과 power를 달리해가며 최적의 FeMn 증착조건을 고찰하였다. 이로부터 FeMn과 Co간의 계면이 평탄해질수록 교환결합의 세기가 증가함을 알 수 있었다. AES 분석으로부터 열처리에 의해 Co와 Cu간 계면고용층이 소멸됨을 확인하였다. 기판/Co/Cu/Co/FeMn 스핀밸브를 열처리함으로써 교환이방성 결합과 자기저항비를 각각 3배와 1.4배 이상 향상시켰다.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.589-595
• /
• 2013

Solution processed conjugated molecules enable to manufacture various electronic devices by unconventional and cost effective patterning methods as screen or gravure printing. Spin-coating is the most popularly used method to form conjugated polymeric film for various electronic devices. The coating method has certain disadvantages such as a large amount of unwanted wastes, difficulty forming a film with a large area, and impossible to apply roll-to-roll manufacturing. We present here a promising alternative coating method, bar-coating for conjugated polymer film and OLED with the bar coated light emitting layer. In this papers, we show atomic force microscope images of spin- and bar-coated Poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,8-diyl)] (F8BT) films on substrate. The bar-coated film showed a slight lower RMS roughness (1.058 [nm]) than spin-coated film (1.767 [nm]). It means the bar-coating is suitable method to form light emitting layers in OLEDs. By using bar-coating process, an OLED obtained with 4.7 [cd/A] in maximum current efficiency.

• 한국자기학회지
• /
• 제23권3호
• /
• pp.98-103
• /
• 2013

NiFe/Cu/NiFe/IrMn/NiFe/Cu/NiFe 이중 거대자기저항-스핀밸브(GMR-SV) 박막의 진공 후열처리 온도의존성을 조사하여 강자성층 자화용이축을 유도하였다. 자유층과 고정층의 자화용이축에 의존하는 이중 스핀밸브 박막의 자기저항곡선은 외부자기장 각도를 다르게 하면서 측정하였다. 열처리온도가 $105^{\circ}C$일 때, $0^{\circ}$와 $90^{\circ}$ 사이 임의 측정 각도에서 약 2.0 %/Oe인 자장감응도 특성을 얻었다. 이러한 결과는 면상 강자성층과 자유층을 면상에서 서로 직교한 자화방향 유도를 통하여 이중구조 GMR-SV 박막이 고감도 바이오센서로 사용할 가능성을 제시하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.134-134
• /
• 2012

We investigated the interface of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) by using photoelectron spectroscopy (PES). These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. Study of the BHJ interfaces is difficult because the organic films are typically prepared by spin coating in ambient conditions. This is incompatible with the interface electronic structure probes such as PES, which requires ultrahigh vacuum conditions. Study of interface requires gradual deposition of thin films that is also incompatible with the spin coating process. In this work, we used electrospray vacuum deposition (EVD) technique to deposit P3HT and PCBM in high vacuum conditions. EVD allows us to form polymer thin films onto ITO substrate in a step-wise manner directly from solutions and to use PES without exposing the sample to the ambient condition. Although the morphology of the EVD deposited P3HT films observed by optical and atomic force microscopes is quite different from that of the spin coated ones, the valence region spectra were similar. PCBM was deposited on the P3HT film in a similar manner and the energy level alignment between these two materials was studied. We discuss the relation between Voc of P3HT:PCBM solar cell and HOMO-LUMO energy offset obtained in this study.