• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.145-149
• /
• 2007

Electrochemical studies were performed for a single particle of nickel hydroxide for the cathode of Ni-MH batteries. A carbon fiber microelectrode was manipulated to make electrical contact with an alloy particle, and electrochemical experiments were performed. As a result of cyclic voltammetry, the oxidation/reduction and oxygen evolution reaction (OER) are clearly separated for a single particle. The total cathodic charge (Qred) is practically constant for the scan rate investigated, indicating that the whole particle has reacted. The total anodic charge(Qox) was larger than that of reduction reaction, and the magnitude of oxygen evolution taking place as a side reaction was enhanced at lower scan rates. As a result of galvanostatic charge and discharge measurement, the discharge capacity of single particle was found to be 250 mAh/g, value being very close to the theoretical capacity (289 mAh/g). The apparent proton diffusion coefficient(Dapp) using potential step method inside the nickel hydroxide was found to range within $3{\sim}4{\times}10^{-9}\;cm^2/s$.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.43-53
• /
• 2012

A suspension copolymerization of styrene and butyl methacrylate (BMA) in the aqueous phase was conducted at a selected temperature between 65 and $95^{\circ}C$. Hydrophobic silica was selected as a stabilizer and azobisisobutyronitrile (AIBN) as an initiator. Optimum dispersion of silica in water was obtained at pH 10 while polymerization reaction was run at pH 7. TGA and EDS measurements revealed that 90% of silica functioned as a stabilizer and 10% were incorporated into polymeric particles. Average particle diameter decreased with increasing amounts of stabilizer. Molecular weights displayed an increase when the stabilizer concentration reached 1.67 wt%. An increase in the initiator concentration and/or reaction temperature raised the reaction rate but decreased molecular weights. Particle diameter was nearly independent of the initiator concentration and reaction temperature. An increase in the BMA proportion decreased the glass transition temperature and increased the particle diameter with irregularity in shape. Incorporation of carbon black into the particles composed of styrene and BMA prolonged the reaction time before reaching completion. We have confirmed that a suspension copolymerization of styrene and BMA with hydrophobic silica as a stabilizer can produce spherical composite particles with $1-30{\mu}m$ in diameter containing carbon black.

• Korean Journal of Ichthyology
• /
• v.13 no.1
• /
• pp.6-18
• /
• 2001

Larvae of the gunnel Pholis fangi were collected in coastal waters off Daecheon with a bag net from March to June, 1988, and with a ring larva net in February 1989. Maturity and spawning period were analyzed by examination of the gonads of adult fish collected with a bag net from May 1998 through November 1999. In February, the larvae were widely distributed in the outer and inner Cheonsu Bay. From March to April the larvae were present mainly the inner bay; they were absent there in May and found mainly in the outer bay. After June, few gunnel larvae were collected in the study area. This suggests a seaward movement of gunnel from the nursery grounds of the bay to offshore feeding grounds. The otolith of larvae smaller than 10 mm in total length did not show a distinct growth stop. The growth stop is believed to be formed in the early larval stage when the total length is about 10 mm. This period coincides with the time of shoreward migration, suggesting a metabolic change during this period. At a total length of 30 to 40 mm, the shape of the otolith changes from spherical to elongate. Daily growth rate in length was estimated by the Gompertz equation, which is represented as follows: TL = 6.702exp{2.925"1-exp (-0.008 t)"} ($r^2=0.94$, N = 92) Assuming daily deposition of growth increments in the otolith, the time of first growth increment formation was shown to be from December to January. Gonad observations show that Pholis fangi spawns from November to December. So, the hatching time is thought to be about one month.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.175-179
• /
• 2018

The button mushroom 'A. bisporus' is the most commonly grown mushroom worldwide. The color of 'Agaricus bisporus' is white and brown. Recently, the consumption of brown button mushrooms has been increasing steadily. 'Danseok-1ho' was bred using the multi-spore random mating method and named after Danseok Mountain in Gyeongju, the region where 'A. bisporus' was first grown in Korea. The optimum temperature for mycelial growth was between $20^{\circ}C$ and $30^{\circ}C$, and the mushroom production temperature was between $15^{\circ}C$ and $20^{\circ}C$. The color and shape of 'Danseok-1ho' are medium brown and spherical, respectively. The width and thickness of the pileus are 45.1 mm and 23.5 mm, respectively. The hardness and L of chromaticity of 'Danseok-1ho' are $8,937g/{\Phi}5mm$ and 50.4, respectively. The incubation period is around 20 days and mushroom production takes about 18 days after casing. A typical characteristic of 'Danseok-1ho' is that the individual occurrence rate is high, so mushroom losses are low during harvest.

• Parasites, Hosts and Diseases
• /
• v.36 no.2
• /
• pp.91-98
• /
• 1998

The present study was performed to observe characteristics of the lifE history of Echinoparvphium recunpatum under both natural and laboratory conditions in Korea. A batch of Rcnix aunculnria corecna was collected from Sunamchon, one of the stream of West Naktonggang (River), in Kangso-gu, Pusan during August and September 1992. Out of 106 snails examined by crushing,52 (49.0%) were infected with larval E. recurvaum i.e. rediae, cercariae and metacercariae. Cercariae naturally shed from snails encysted in the snails of same species and loaches, but not in mud-snails. Adult worms were detected from chicks and ducks experimentally infected with metacercariae, but not from rats and mice. The average recovery rate of adults from chicks was 13.1%. Rediae were sac-like, $2.437{\;}{\times}{\;}0.317{\;}mm$ in average size, with a muscular pharynx and a brownish cecum which reached the anterior half of the body. Cercariae consisted of a spindle-shaped body ($0.262{\;}{\times}{\;}0.129{\;}mm$ in average) and a rod-like tail ($0.528{\;}{\times}{\;}0.056{\;}mm$ in average). In the cercarial body, 45 collar spines were observed on the head crown, and double rows of excretory ducts with fine granules were laterally arranged between the pharynnx and the ventral sucker. Metacercariae were spherical, $0.144{\;}{\times}{\;}0.142{\;}mm in average size, with thick hyaline outer and thin elastic inner walls, and many excretory granules. Adults were slender and more attenuated in the anterior end, $0.2760{\;}{\times}{\;}0.550{\;}mm$ in average size, and had 45 collar spines including four end group spines on both ventral corners. From the above results, it was confirmed that R. auriculnna corennc plays a pivotal role in the life cycle of 5. recuwatum as the first and/or second intermediate hosts in Korea.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.126-132
• /
• 1992

Experiment has been performed to investigate the thermal and magnetic properties of Mn-ferrite by electrolysis. Using the 0.2%C mild steel as soluble anode and SUS 304 stainless steel as cathode, Mn-ferrite could be made from the sulfuric acid leaching of the wasted manganese dry cell and $MnSO_4$reagent by electrolysis. As the result of X-ray diffraction, thermal analysis and magnetic measurement, Mn-ferrite was the spinel type in $Mn_{x}Fe_{3-x}O_4$ (X=1), the weight loss rate of $Mn_{x}Fe_{3-x}O_4$ were linearly increased up to the $200^{\circ}C$. Ms, Mr and Hc values were decreased with increasing Mn content and heating temperature. When Mn-ferrite was formed by $MnCl_2$reagent electrolysis, Ms values were higher than those formed from the sulfuric acid leaching of the wasted manganese dry cell and $MnSO_4$reagent by electrolysis. In Mn-ferrite, which was formed from the sulfuric acid leaching of the wasted manganese dry cell by electrolysis, Ms and Mr values were higher, Hc values were lower than which was formed by $MnSO_4$ reagent electrolysis at $200^{\circ}C\;and\;300^{\circ}C, while the same values at $100^{\circ}C$. The shape of particles was spherical type, the sizes of them were about $0.1{\mu}m$ sub-micron in $MnSO_4$reagent electrolysis, $0.5{\mu}m$ in the sulfuric acid leaching of the wasted manganese dry cell by electrolysis.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.106-110
• /
• 2006

If drugs are made from nanoparticles, their formulations can be more effective than the conventional ones. Especially, water insoluble drugs having low absorption rates into our body could show improvement in their adsorption and bioavailability by decreasing their particle sizes to nanometers. In this study, polyvinylpyrrolidone (PVP) and various sugars were employed as stabilizers for the nanoparticles of a water insoluble drug, Itraconazole. Nanoparticles were successfully produced by the wet slurry process for five days. Then, spray drying converted the aqueous dispersions into dry powders, and the redispersibility of dried nanoparticles into water was investigated. The effects of temperature, pressure, and flow rate were studied to understand the importance of processing variables on redispersibility. It was found in particle size analysis that nanoparticles containing sugars have better redispersibility than those without sugars. Additionally, the mainly spherical morphology of dried nanoparticles was identified by SEM (Scanning Electron Microscopy) and AFM (Atomic Force Microscopy).

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.501-510
• /
• 2016

In this study, we investigated the degradation of adhesives when exposed to ultraviolet light irradiation using samples of lacquer (L), treated lacquer (TL), lacquer mixed with glue (LG), and urushiol mixed with glue (UG). Four types of film specimens were collected under the ultraviolet exposure time, and gloss test, tensile shear strength test, scanning electron microscope analysis, and infrared spectroscopic analysis were conducted for the specimens. LG and UG showed lowering rate of gloss is somewhat later than L. Also, it was observed that with increasing exposure time to ultraviolet irradiation, the surface of L began to show spherical pits and cracks when the polysaccharide layers started to be exposed, whereas the surfaces of LG and UG remained smooth. The Infrared spectra of L and TL showed that the intensity of the overall peak decreased with increasing ultraviolet irradiation time. There was no change in the peak intensity of LG, but for UG, the peaks at $3013cm^{-1}$, $1593cm^{-1}$ and so on disappeared and the overall intensity declined. The tensile shear strength of LG and UG was maintained or increased as compared to the initial test, whereas the tensile shear strength of L decreased sharply after 600 h. LG and UG exhibited fewer changes as a result of high temperature and humidity conditions, and they retained their strength under UV exposure. These results indicate that LG and UG are more durable than L when subjected to environmental change.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.39-49
• /
• 1986

The purpose of this study was to observe characteristic properties through the polarization curves and SEM images from 4 different types of amalgam obtained by using the potentiostats (Princeton EG & G) & SEM (Jeol/35), and to investigate the degree of corrosion on the oxidation peak of the each phase of amalgam. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of the mechanical amalgamator (Shofu Co.), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10.0mm in height and was condensed by using routine manner. The specimen was removed from the mold and stored at room temperature for about 24 hours. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to confirm the corrosion behaviour of the amalgams in a 0.9% saline solution (P.H: 6.8-7.0) at $37^{\circ}C$. The initial rest potential (corrosion potential) was determined after 30 minutes of immersion of specimen in electrolyte, and the potential scan was begun at the point of 100mV cathodic from the corrosion potential. The scan rate was 0.17mV/sec. in the study to observe the degree of corrosion of each phase. SEI and EPMA images on the determined oxidation peaks of each amalgam were observed. The results were as follows: 1. In the four anodic polarization curves, low copper amalgams have three oxidation peaks and high copper amalgams have two oxidation peaks, -270mV, +26mV and +179mV(SEC) in the low copper lathe cut, and -300mV, +39mV and +163mV(SEC) in the low copper spherical. -4mV and +154mV(SEC) in the Dispersalloy, and +17mV and +180mV(SEC) in the Tytin as high copper amalgams. 2. ${\gamma}_2$ phase in the low copper amalgam and ${\eta}$ phase in the high copper amalgam were the most corrodible phases and Ag-Cu eutectic in high copper amalgam was the most slowly corroded phase. 3. Low copper amalgam was more susceptible in corrosion than high copper amalgam.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.6-15
• /
• 1991

The purpose of this study was to observe in vitro chloride corrosion behavior from 5 kinds of amalgam (Caulk spheracal, Amalcap, Dispersalloy, Tytin, Sybralloy) as a function of time after tritruration by using potentiostat. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by the mechanical amalgamator, the triturated mass was inserted the cyrindrical matal mold ($12{\times}10mm$) and was condensed by using routine manner. The specimen was removed from the mold and was stored at room temperature for 1 week, 1 month and 3 months, and standard surface preparation was routine carried out. The 0.9% saline solution was used as electrolyte in pH 6.8~7.0 at $30{\pm}0.5.^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of 1 week, 1 month and 3 month old specimens. The scan rate was 1 mV/sec and the surface area of amalgam exposed to the solution was $0.65\;Cm^2$ for each specimen. All potentials reported are with respect to a silver / silver chloride electrode (SSE). The following result was obtained. 1. All amalgam specimens became more noble corrosion potentials which represent the improved corrosion resistance as the time elapsed. 2. Three kinds of high copper amalgam always exhibited more noble potential than low copper amalgam at 1 week, 1 month and 3 months. 3. Two kinds of low copper amalgam had the similar polarization curve pattern with 3 current peaks at each time period and current densities associated with these peaks were decreased as aging especially in caulk spherical amalgam. 4. All kinds of high copper amalgam had the similar polarization curve pattern with absence of prominent current peak at each time period, but the polarization curve of D amalgam had one apparent current peak at 1 week.