• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.3
• /
• pp.219-228
• /
• 1998

In the present investigation, a numerical model developed for the prediction of the wind flow over complex terrain is validated by comparing with the field experiments. For the solution of the Reynolds - Averaged Clavier- stokes equations which are the governing equations of the microscale atmospheric flow, the model is constructed based on the finite-volume formulation and the SIMPLEC pressure-correction algorithm for the hydrodynamic computation. The boundary- fitted coordinate system is employed for the detailed depiction of topography. The boundary conditions and the modified turbulence constants suitable for an atmospheric boundary- layer are applied together with the k- s turbulence model. The full- scale experiments of Cooper's Ridge, Kettles Hill and Askervein Hill are chosen as the validation cases . Comparisons of the mean flow field between the field measurements and the predicted results show good agreement. In the simulation of the wind flow over Askervein Hill , the numerical model predicts the three dimensional flow separation in the downslope of the hill including the blockage effect due to neighboring hills . Such a flow behavior has not been simulated by the theoretical predictions. Therefore, the present model may offer the most accurate prediction of flow behavior in the leeside of the hill among the existing theoretical and numerical predictions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.519-525
• /
• 2011

High-resolution earth-observing satellites acquire substantial amount of geospatial images. In addition to high image quality, high-resolution satellite images (HRSI) provide unprecedented direct georegistration accuracy, which have been enabled by accurate orbit determination technology. Direct georegistration is carried out by relating the determined position and attitude of camera to the ground target, i.e., projecting an image point to the earth ellipsoid using the collinearity equation. However, the apparent position of ground target is displaced due to the atmosphere and satellite velocity causing significant georegistration bias. In other words, optic ray from the earth surface to satellite cameras at 400~900km altitude refracts due to the thick atmosphere which is called atmospheric refraction. Velocity aberration is caused by high traveling speed of earth-observing satellites, approximately 7.7 km/s, relative to the earth surface. These effects should be compensated for accurate direct georegistration of HRSI. Therefore, this study presents the equation and the compensation procedure of atmospheric refraction and velocity aberration. Then, the effects are simulated at different image acquisition geometry to present how much bias is introduced. Finally, these effects are evaluated for Quickbird and WorldView-1 based on the physical sensor model.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.45-53
• /
• 1983

There exist many kinds of frictions in internal combustion engine such as piston ring and skirt, cam and tappet, bearing friction etc. Among them, the frictions between piston ring, skirt and cylinder are particular. These frictions for motoring test are differ from that of firing test even though the temperature of cooling water and lubricating oil keep identically. The frictions for firing test are increased due to combustion pressure and products. The precise calculation of the friction is difficult. But we can assume that the friction is governed by the viscosity of lubricating oil and gas pressure of cylinder. And the viscosity of lubricating oil is dependant on gas temperature of cylinder, so the piston friction may be governed by gas pressure and temperature of cylinder. In this treatise, we propose the method of evaluating piston friction under the condition of constant engine speed, and we analyzed the behaviours and influence of factors concerned with the piston friction for output correction when the inlet pressure and temperature were varied. The main results are as follows: 1) The behaviours on the inlet conditions for the contact force of the piston rings and the viscosity of the lubricating oil concerned with piston friction are found. 2) The essential point the these behaviours is dependant on the cyclic variation following to the inlet conditions. 3) According to our analysis, It was observed that the viscosity of lubricating oil is more effective than the contact force to the piston rings.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.840-846
• /
• 1991

In case of the rapid thermal process by halogen lamps, an optical pyrometer is generally used to measure the temperature. It is, however, necessary to measure the temperature by the thermocouple when the process temperature is lower than 700$^{\circ}C$ and the correction of the temperature is required. Contact by the PdAg paste is commonly used out but in this case it is impossible to see the effect of surface states of the substrate, which is critical in the rapid thermal process. In this study, real temperature ramping speed of silicon substrates coveredwith various thin films such as SiO$_2$2, Si$_{3}N_{4}$, dopants, and conductive layers (Ti or Co) was investigated by a mechanical contact of the thermocouple. And the results were compared with the case in which the contact was made by the PdAg paste. Effect of process ambient was also studied. It was found that depending on the surface state, overshoot more than 100$^{\circ}C$ could occur. It was also found that in case of the substrate covered with conductive layers, mechanical contact might render the correct temperature.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.3
• /
• pp.253-262
• /
• 2016

Recently, UWAC (underwater acoustic communication) has been studied by many scholars and researchers. DS-CDMA, OFDM (orthogonal-frequency division multiplexing), and MIMO (multi-input multi-output), modulation and error correction, and others techniques that can transmit high-speed data are used in UWAC. In this paper, we first briefly present the theoretical background of estimating the arrival time of the first non-background segment in both signals and calculate the temporal difference. We also present the initial experimental result of estimating the arrival time.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1587-1588
• /
• 2015

일반적으로 국내의 대부분의 전기철도는 단상 교류식이므로 전력계통의 3상 154[kV]을 스코트 변압기를 통해 단상 55[kV]로 변환하여 단상 교류로 공급받는다. 전기철도는 기동 특성 및 제동 특성에 따라 부하의 급증과 급감, 임의의 한 급전 구간 내에 운행 일정 중복으로 다수의 전기철도 차량이 운행될 경우 상호간 전기적 특성이 수시로 변한다. 이와 같은 전기적 특성이 수시로 변하는 전력량은 스코트 변압기에서 전력량을 측정하게 된다. 스코트 변압기 1차측 3상 전력이 2차측 단상 전력으로 변환하는 전기기기이며, 전동차가 제동시 회생전력이 발생되는데 이로인해 스코트변압기의 1차측과 2차측 위상이 다르게 발생되어 계량오차가 발생되는 문제점이 있다. 따라서, 본 논문에서는 계량오차의 문제점을 해결하기 위해, 스코트 변압기 2차측 기준으로 전압과 전류의 위상차를 계산하여 회생전력과 수전전력을 정확하게 계량하여 오차를 판단하고 보정하는 알고리즘을 제시하고자 한다.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.4
• /
• pp.163-171
• /
• 2020

The study aims to examine the effects of inward every presence of foreign investment, import, and real exchange rate shocks on export performance in Vietnam. This study employs a time-series sample dataset in the period of 2009 - 2018. All data are collected from the General Statistics Office of Ministry of Planning and Investment in Vietnam, World Development Indicator and Ministry of Finance, State Bank of Vietnam. This study employs the Augmented Dickey-Fuller test and the vector error correction model with the analysis of cointegration. The results demonstrate that a higher value of import significantly accelerates export performance in the short run, but insignificantly generates in the long run. When the volume of registered foreign investment goes up, the export performance will predominantly decrease in the both short run and long run. Historically, countries worldwide are more likely to devaluate their currencies in order to support export performance. According to the study, the exchange rate volatility has an effect on the external trade in the long run but no effect in the short run. Finally, Vietnam's export performance converges on its long-run equilibrium by roughly 6.3% with the speed adjustment via a combination of import, every presence of foreign investment, and real exchange rate fluctuations.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2002

A coastwise chemical tanker sailing at full speed has capsized in calm water and while turing. We investigate reasons of the accident and demonstrate that a proper correction for the free surface effect of the liquid cargo has not been practiced in the initial design stage and that the bow-sinkage induced in sailing has weakened the form stability of the ship. It is also shown that the liquid cargo shift occurring in turning generated a significant outward heel moment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.753-763
• /
• 2020

A wind tunnel test of 29.7% scaled model of NASA Common Research Model with belly model support was performed in small low speed wind tunnel. The static aerodynamic forces and moments of CRM were measured with belly sting support configuration. Pitching moments of belly sting with various fairings were compared and small interference fairing shape was found. The belly sting model support interference and reducing effect of fairing shapes with CFD analysis.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.786-797
• /
• 2016

This paper describes the design and development of a novel semiconductor-based solid-state switch for damped oscillating voltage test system. The proposed switch is configured as two identical series-connected switch stacks, each of which comprising 10 series-connected IGBT function units. Each unit consists of one IGBT, a gate driver, and an auxiliary voltage sharing circuit. A single switch stack can block 20 kV-rated high voltage, and two stacks in series are proven applicable to 30 kV-rated high voltage. The turn-on speed of the switch is approximately 250 ns. A flyback topology-based power supply system with a front-end power factor correction is built for the drive circuit by loosely inductively coupling each unit with a ferrite core to the primary side of a power generator to obtain the advantages of galvanic isolation and compact size. After the simulation, measurement, and estimation of the parasitic effect on the gate driver, a prototype is assembled and tested under different operating regimes. Experimental results are presented to demonstrate the performance of the developed prototype.