• ETRI Journal
• /
• v.36 no.5
• /
• pp.772-782
• /
• 2014

Two-microphone binary mask speech enhancement (2mBMSE) has been of particular interest in recent literature and has shown promising results. Current 2mBMSE systems rely on spatial cues of speech and noise sources. Although these cues are helpful for directional noise sources, they lose their efficiency in diffuse noise fields. We propose a new system that is effective in both directional and diffuse noise conditions. The system exploits two features. The first determines whether a given time-frequency (T-F) unit of the input spectrum is dominated by a diffuse or directional source. A diffuse signal is certainly a noise signal, but a directional signal could correspond to a noise or speech source. The second feature discriminates between T-F units dominated by speech or directional noise signals. Speech enhancement is performed using a binary mask, calculated based on the proposed features. In both directional and diffuse noise fields, the proposed system segregates speech T-F units with hit rates above 85%. It outperforms previous solutions in terms of signal-to-noise ratio and perceptual evaluation of speech quality improvement, especially in diffuse noise conditions.

• Proceedings of the KSPS conference
• /
• 2006.05a
• /
• pp.127-130
• /
• 2006

This paper suggests an algorithm that can estimate the direction of the sound source with three microphones arranged on a circle. The algorithm is robust to microphones' gains because it uses only the time differences between microphones. To make this possible, a cost function which normalizes the microphone's gains is utilized and a procedure to detect the rough position of the sound source is also proposed. Through our experiments, we obtained significant performance improvement compared with the energy-based localizer.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2E
• /
• pp.24-30
• /
• 1999

In this paper, we propose a weighting dependent mixed source model (WD-MSM) coder that is an improved version of a CELP-based mixed source model (C-MSM) coder. The coder classifies speech segments into three types : voiced, unvoiced and mixed. The excitation for a voiced frame is an adaptive source, and the excitation for an unvoiced frame is a stochastic source. The coder has a modified mixed source for a mixed frame. We apply different weighting functions for three classes. Simulation results show that the proposed coder at 4 kbits/s yields very good performance both subjectively and objectively.

• Speech Sciences
• /
• v.2
• /
• pp.25-44
• /
• 1997

When listening the various speech synthesis systems developed and being used in our country, we find that though the quality of these systems has improved, they lack naturalness. Moreover, since the voice color of these systems are limited to only one recorded speech DB, it is necessary to record another speech DB to create different voice colors. 'Voice Color' is an abstract concept that characterizes voice personality. So speech synthesis systems need a voice color control function to create various voices. The aim of this study is to examine several factors of voice color control rules for the text-to-speech system which makes natural and various voice types for the sounding of synthetic speech. In order to find such rules from natural speech, glottal source parameters and frequency characteristics of the vocal tract for several voice colors have been studied. In this paper voice colors were catalogued as: deep, sonorous, thick, soft, harsh, high tone, shrill, and weak. For the voice source model, the LF-model was used and for the frequency characteristics of vocal tract, the formant frequencies, bandwidths, and amplitudes were used. These acoustic parameters were tested through multiple regression analysis to achieve the general relation between these parameters and voice colors.

• Phonetics and Speech Sciences
• /
• v.5 no.4
• /
• pp.211-216
• /
• 2013

The IVA(Independent Vector Analysis) is a well-known FD-ICA method used to solve the frequency permutation problem. It generally works quite well for blind source separation problems, but still needs some improvements in the frequency bin permutation problem. This paper proposes a post-processing method which can improve the source separation performance with the IVA by fixing the remaining frequency permutation problem. The proposed method makes use of the correlation coefficient of power ratio between frequency bins for separated signals with the IVA-based 2-channel source separation. Experimental results verified that the proposed method could fix the remaining frequency permutation problem in the IVA and improve the speech quality of the separated signals.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2E
• /
• pp.56-67
• /
• 2004

Despite abundant research outcomes of blind source separation (BSS) in many types of simulated environments, their performances are still not satisfactory to be applied to the real environments. The major obstacle may seem the finite filter length of the assumed mixing model and the nonlinear sensor noises. This paper presents a two-step speech enhancement method with multiple microphone inputs. The first step performs a frequency-domain BSS algorithm to produce multiple outputs without any prior knowledge of the mixed source signals. The second step further removes the remaining cross-channel interference by a spectral cancellation approach using a probabilistic source absence/presence detection technique. The desired primary source is detected every frame of the signal, and the secondary source is estimated in the power spectral domain using the other BSS output as a reference interfering source. Then the estimated secondary source is subtracted to reduce the cross-channel interference. Our experimental results show good separation enhancement performances on the real recordings of speech and music signals compared to the conventional BSS methods.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4E
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.

• Phonetics and Speech Sciences
• /
• v.3 no.4
• /
• pp.85-91
• /
• 2011

Sasang constitution medicine utilizes voice characteristics to diagnose a person's constitution. To classify Sasang constitutional groups using speech information technology, this study aims at establishing the relationship between Sasang constitutional groups and their corresponding voice characteristics by investigating various speech feature variables. The speech variables include features related to speech source and vocal tract filter. Experimental results show that statistically significant correlation between voice characteristics and some speech feature variables is observed.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.92-97
• /
• 2000

An AMR(Adaptive Multi-Rate) speech coding algorithm has been adopted as a standard speech codec for IMT-2000. It is based on the algebraic CELP, and consists of eight speech coding modes having the bit rate from 4.75 kbit/s to 12.2 kbit/s. It also contains the VAD(Voice Activity Detector), SCR (Source Controlled Rate) operation, and error concealment scheme for robustness in a radio channel. The bit rate of AMR is changed on a frame basis depending on the channel condition. In this paper, we introduced AMR speech coding algorithm and performed the real-time implementation using TMS320C6201, i.e., a Texas Instrument's fixed-point DSP. With the ANSI C source code released from ETSI and 3GPP, we convert and optimize the program to make it run in real time using the C compiler and assembly language. It is verified that the decoded result of the implemented speech codec on the DSP is identical with the PC simulation result using ANSI C code for test sequences. Also, actual sound input/output test using microphone and speaker demonstrates its proper real-time operation without distortions or delays.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.431-433
• /
• 2018

This paper proposes the system that offer super-wideband speech which is made by artificial bandwidth extension technique using wideband speech signal in time-domain. wideband excitation signal and line spectrum pair(LSP) are extracted based on source-filter model in time-domain. Two parameters are extended by each bandwidth extension algorithms, and then, super-wideband speech parameters are estimated. and synthesized. Subjective test shows super-wideband speech is better speech quality than wideband speech signal.