• 대한원격탐사학회지
• /
• 제27권2호
• /
• pp.75-87
• /
• 2011

본 연구에서는 고해상도 위성영상을 이용하여 기존의 훈련지역 선정과 같은 사용자 개입 없이, 영상의 다중분광 및 색상 불변 특정 정보를 통합한 영역기반 건물 추출 방법론을 개발하고, 이를 IKONOS와 QuickBird 영상에 적용하여 개발된 방법의 효용성을 평가하는데 목적이 있다. 이를 위해 우선 영상을 시드기반 영역확장기법인 MSRG기법을 이용하여 분할한 후, 건물 추출의 편의성을 높이기 위한 전처리 과정의 일환으로 분할된 영상에서 식생과 그림자 객체를 자동으로 탐지하여 제거하였다. 객체단위의 건물 추출을 위해 다중분광 및 색상 불변 특정 정보가 통합된 영역 병합 과정을 통해 식생과 그림자 객체가 제거된 분할영역에 대하여 영역 병합을 수행하였고, 최종적으로 병합된 분할영역의 형상 특징 정보를 이용하여 건물 영역을 추출하였다. 또한 보다 완전성 높은 건물 추출을 위해 일반화 기법을 이용하여 추출된 건물의 외곽선을 단순화하였다. 실험 결과, 대상지역 모두에서 80% 이상의 건물탐지 정확도를 보였으며 시각적으로도 우수한 결과를 도출하였다. 결과적으로 제안된 방법은 고해상도 위성영상의 건물 추출에 유용하게 적용될 수 있으리라 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.65-65
• /
• 2002

In remote sensing, images are acquired over the same area by sensors of different spectral ranges (from the visible to the microwave) and/or with different number, position, and width of spectral bands. These images are generally partially redundant, as they represent the same scene, and partially complementary. For many applications of image classification, the information provided by a single sensor is often incomplete or imprecise resulting in misclassification. Fusion with redundant data can draw more consistent inferences for the interpretation of the scene, and can then improve classification accuracy. The common approach to the classification of multisensor data as a data fusion scheme at pixel level is to concatenate the data into one vector as if they were measurements from a single sensor. The multiband data acquired by a single multispectral sensor or by two or more different sensors are not completely independent, and a certain degree of informative overlap may exist between the observation spaces of the different bands. This dependence may make the data less informative and should be properly modeled in the analysis so that its effect can be eliminated. For modeling and eliminating the effect of such dependence, this study employs a strategy using self and conditional information variation measures. The self information variation reflects the self certainty of the individual bands, while the conditional information variation reflects the degree of dependence of the different bands. One data set might be very less reliable than others in the analysis and even exacerbate the classification results. The unreliable data set should be excluded in the analysis. To account for this, the self information variation is utilized to measure the degrees of reliability. The team of positively dependent bands can gather more information jointly than the team of independent ones. But, when bands are negatively dependent, the combined analysis of these bands may give worse information. Using the conditional information variation measure, the multiband data are split into two or more subsets according the dependence between the bands. Each subsets are classified separately, and a data fusion scheme at decision level is applied to integrate the individual classification results. In this study. a two-level algorithm using hierarchical clustering procedure is used for unsupervised image classification. Hierarchical clustering algorithm is based on similarity measures between all pairs of candidates being considered for merging. In the first level, the image is partitioned as any number of regions which are sets of spatially contiguous pixels so that no union of adjacent regions is statistically uniform. The regions resulted from the low level are clustered into a parsimonious number of groups according to their statistical characteristics. The algorithm has been applied to satellite multispectral data and airbone SAR data.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1121-1121
• /
• 2001

A previous study (Berzaghi et al., 2001) evaluated the performance of 3 calibration methods, modified partial least squares (MPLS), local PLS (LOCAL) and artificial neural networks (ANN) on the prediction of the chemical composition of forages, using a large NIR database. The study used forage samples (n=25,977) from Australia, Europe (Belgium, Germany, Italy and Sweden) and North America (Canada and U.S.A) with reference values for moisture, crude protein and neutral detergent fibre content. The spectra of the samples were collected using 10 different Foss NIR Systems instruments, only some of which had been standardized to one master instrument. The aim of the present study was to evaluate the behaviour of these different calibration methods when predicting the same samples measured on different instruments. Twenty-two sealed samples of different kind of forages were measured in duplicate on seven instruments (one master and six slaves). Three sets of near infrared spectra (1100 to 2500nm) were created. The first set consisted of the spectra in their original form (unstandardized); the second set was created using a single sample standardization (Clone1); the third was created using a multiple sample procedure (Clone6). WinISI software (Infrasoft International Inc., Port Mathilda, PA, USA) was used to perform both types of standardization, Clone1 is just a photometric offset between a “master” instrument and the “slave” instrument. Clone6 modifies both the X-axis through a wavelength adjustment and the Y-axis through a simple regression wavelength by wavelength. The Clone1 procedure used one sample spectrally close to the centre of the population. The six samples used in Clone 6 were selected to cover the range of spectral variation in the sample set. The remaining fifteen samples were used to evaluate the performances of the different models. The predicted values for dry matter, protein and neutral detergent fibre from the master Instrument were considered as “reference Y values” when computing the statistics RMSEP, SEPC, R, Bias, Slope, mean GH (global Mahalanobis distance) and mean NH (neighbourhood Mahalanobis distance) for the 6 slave instruments. From the results we conclude that i) all the calibration techniques gave satisfactory results after standardization. Without standardization the predicted data from the slaves would have required slope and bias correction to produce acceptable statistics. ii) Standardization reduced the errors for all calibration methods and parameters tested, reducing not only systematic biases but also random errors. iii) Standardization removed slope effects that were significantly different from 1.0 in most of the cases. iv) Clone1 and Clone6 gave similar results except for NDF where Clone6 gave better RMSEP values than Clone1. v) GH and NH were reduced by half even with very large data sets including unstandardized spectra.

• 한국토양비료학회지
• /
• 제34권5호
• /
• pp.342-349
• /
• 2001

Landsat TM 인공위성 자료(1997년 6월 16일 촬영)를 이용하여 평택시에 대한 지표피복분류도를 만들고 정확도를 평가하였고, 또한 우리 나라의 농업실정에 맞는 지표피복 분류체계를 세우기 위해 Anderson의 지표피복분류안을 응용하여 새로운 분류안을 만들었다. 분류방식으로는 감독분류를 사용하였는데 결과에 직접적인 영향을 주는 훈련장소(training site)의 선정을 위해 지형도, 항공사진 등과 현지 실사자료인 DGPS 자료를 사용하여 논, 밭 등 13개의 훈련조(training sets)를 작성 후 최대우도법(最大尤度法)(maximum likelihood classifier)을 적용하여 주제도를 만들었다. 이의 정확도 평가를 위해 DGPS, 항공사진, 지형도 등을 이용한 분류정확도 평가에서 전체 정확도는 86.8%이며, 카파계수가 85.4%로 매우 양호한(Excellent) 것으로 판명되었다. 그러나 도시/촌락, 비닐하우스 등의 사용자 정확도는 60% 정도로서 낮은 편이며, 도로, 비닐하우스 등의 생산자 정확도는 70% 정도로 낮은 편인데, 이는 인공건조물이라는 특징에 따른 분광학적 반사특성과 이질성(異質性)과 분포면적이 적은데 기인된 것으로 생각된다. 한편 원격탐사자료를 이용하여 토지피복 분류도를 작성할 때 우리나라 농업실정에 알맞은 농업적(農業的) 지표피복분류안(地表被覆分類案)을 만들었는데, 수준 I에는 농경지, 산림지, 물, 불모지, 도시나 인공건조물 등으로 나눌 수 있다.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.305-313
• /
• 2008

본 연구에서는 교량의 노면조도 및 교량과 차량 사이의 상호작용을 고려한 수치해석방법을 사용하여 구한 도로교의 동적하중허용계수(DLA)를 LRFD 형식으로 신뢰도이론의 2차 모멘트법을 적용하여 보정하였다. 대상교량은 건설교통부에서 제정한 "도로교 상부구조 표준도"에 수록되어 있는 단순 PSC빔교와 단순 강판형교, 그리고 LRFD로 설계된 개구제형 단면을 갖는 강박스형교를 사용하고, "보통의 도로"에 대하여 생성시킨 10개의 노면조도를 사용하였다. 차량은 5축 트랙터-트레일러인 표준트럭(DB-24)을 3차원 차량모델로 모델링하고, 교량은 주형을 보요소로, 콘크리트 바닥판은 쉘요소로 이상화시켰으며 주형과 콘크리트 바닥판 사이는 Rigid Link를 사용하여 3차원으로 모델링하였다. 3가지 형식에 대한 10개의 교량에 각각 10개의 노면조도를 사용하여 해석적 방법으로 구한 100개의 해석결과와 OHBDC에서 사용한 보정 식을 사용하여 PSC빔교, 강판형교, 강박스형교 및 전체 대상교량에 대한 LRFD 형식의 DLA를 통계적으로 추정하였다.

• 천문학회보
• /
• 제40권1호
• /
• pp.78.3-78.3
• /
• 2015

About 70 high redshift quasars with $z{\geq}5$ have been discovered through combinations of standard broad-band filters to distinguish them from contaminating sources. However, among the discovered quasars so far, there is a redshift gap at $5{\leq}z{\leq}6$ due to the limitation of traditional filter sets and selection techniques. To understand the early mass growth of supermassive black holes and the final stage of the cosmic reionization, it is important to find a statistically meaningful sample of quasars with various physical properties. Here we suggest a new selection technique of high redshift quasars using medium-band filters: nine filters with bandwidths of 50nm and central wavelengths from 625 to 1025nm. Photometry with these medium-bands traces the spectral energy distribution (SED) of a source, similar to spectroscopy with R~15. We installed these filters to SED camera for QUasars in EArly uNiverse (SQUEAN) on the 2.1m telescope at McDonald Observatory, and conducted test observations of known high redshift quasars at $4.7{\leq}z{\leq}6.1$ and also dwarf stars for comparison. We found differences in SED shapes between high redshift quasars and dwarf stars, determined their locations on color-color diagrams, and demonstrated that the medium-band filters can enhance the efficiency of selecting robust quasar candidates in this redshift range. In this poster, we propose an effective selection method of high redshift quasars using these medium-band filters and discuss its effect on our high redshift quasar survey.

• 대한원격탐사학회지
• /
• 제28권4호
• /
• pp.369-392
• /
• 2012

현재까지 초분광영상을 위한 다양한 표적탐지 알고리즘이 개발 및 사용되고 있다. 그러나 표적탐지 알고리즘의 비교 및 검증 기준으로 1~2가지 영상에 적용한 탐지정확도 만을 사용하고 있어, 사용자 입장에서 그 적용성을 평가하는 데에는 한계가 있다. 본 연구의 목적은 초분광영상에 대한 표적탐지 알고리즘의 적용성을 체계적으로 분석하는 것이다. 이를 위하여 표적, 배경, 영상의 분광적 또는 복사적 특성에 관련된 5가지 기준 인자들을 정의하였고, 각 인자의 변이에 따른 6가지 기존 표적탐지 알고리즘의 탐지정확도 변화를 비교하였다. 이와 더불어 영상 크기에 따른 각 알고리즘의 처리시간을 비교하였다. 그 결과 탐지정확도 측면에서는 기준인자에 따라 적용성이 높은 알고리즘의 종류가 다르게 나타났다. 처리시간은 2차 통계값 기반 알고리즘이 다른 알고리즘에 비해 매우 크게 나타났다. 탐지정확도와 처리시간을 종합적으로 고려한 결과 사용하는 영상과 표적 그리고 배경의 특성에 따라 적용성이 높은 알고리즘의 종류가 다른 것으로 나타났다. 따라서 초분광영상에 대한 기존 표적탐지 알고리즘의 적용성은 자료의 특성 및 배경과 표적의 공간적 분광적 관계에 따라 다르게 나타나므로, 사용하는 자료의 특성과 목적에 따라 적용하는 표적탐지 알고리즘의 종류가 달라질 필요가 있다.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.258-264
• /
• 2007

Spatiotemporal changes of brain rhythmic activity at a certain frequency have been usually monitored in real time using scalp potential maps of multi-channel electroencephalography(EEG) or magnetic field maps of magnetoencephalography(MEG). In the present study, we investigate if it is possible to implement a real-time brain activity monitoring system which can monitor spatiotemporal changes of cortical rhythmic activity on a subject's cortical surface, neither on a sensor plane nor on a standard brain model, with a high temporal resolution. In the suggested system, a frequency domain inverse operator is preliminarily constructed, considering the individual subject's anatomical information, noise level, and sensor configurations. Spectral current power at each cortical vertex is then calculated for the Fourier transforms of successive sections of continuous data, when a single frequency or particular frequency band is given. An offline study which perfectly simulated the suggested system demonstrates that cortical rhythmic source changes can be monitored at the cortical level with a maximal delay time of about 200 ms, when 18 channel EEG data are analyzed under Pentium4 3.4GHz environment. Two sets of artifact-free, eye closed, resting EEG data acquired from a dementia patient and a normal male subject were used to show the feasibility of the suggested system. Factors influencing the computational delay are investigated and possible applications of the system are discussed as well.

• 분석과학
• /
• 제7권1호
• /
• pp.91-102
• /
• 1994

일련의 polypropylene 계통의 공중합체 및 삼중합체 중에서 단량체의 조성에 관한 조성비를 $^{13}C-NMR$ 스펙트럼을 이용하여 정량하였다. 고온에서 얻어진 고분자의 $^{13}C-NMR$ 스펙트럼은 아주 높은 분해능을 보이며, 이는 모든 시그날을 명확하게 지정하는 것을 가능하게 하였으며, 또한 단량체의 조성비를 계산할 수 있도록 하였다. 따라서 단량체의 조성비를 계산하는 방법을 새롭게 제시하였으며, 고분자에서 dyad, triad, tetrad 및 pentad의 조성비도 계산할 수 있다는 것을 보여 주었다. 이러한 단량체 조성에 관한 NMR 분석 결과는 표준 물질을 이용하여 정량한 IR data와 잘 일치한다는 것을 보여 준다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.852-863
• /
• 2016

Wood-plastic composite (WPC) is a promising and sustainable material, and refers to a combination of wood and plastic along with some binding (adhesive) materials. In comparison to pure wood material, WPCs are in general have advantages of being cost effective, high durability, moisture resistance, and microbial resistance. The properties of WPCs come directly from the concentration of different components in composite; such as wood flour concentration directly affect mechanical and physical properties of WPCs. In this study, wood powder concentration in WPC was determined by Fourier transform near-infrared (FT-NIR) and Fourier transform infrared (FT-IR) spectroscopy. The reflectance spectra from WPC in both powdered and tableted form with five different concentrations of wood powder were collected and preprocessed to remove noise caused by several factors. To correlate the collected spectra with wood powder concentration, multivariate calibration method of partial least squares (PLS) was applied. During validation with an independent set of samples, good correlations with reference values were demonstrated for both FT-NIR and FT-IR data sets. In addition, high coefficient of determination (${R^2}_p$) and lower standard error of prediction (SEP) was yielded for tableted WPC than powdered WPC. The combination of FT-NIR and FT-IR spectral region was also studied. The results presented here showed that the use of both zones improved the determination accuracy for powdered WPC; however, no improvement in prediction result was achieved for tableted WPCs. The results obtained suggest that these spectroscopic techniques are a useful tool for fast and nondestructive determination of wood concentration in WPCs and have potential to replace conventional methods.