• 한국광학회지
• /
• 제12권5호
• /
• pp.376-381
• /
• 2001

광원의 분광복사휘도를 측정하기 위한 실험 장치를 구성하였으며, PMT, Si, InGaAs a c IR enhanced InGaAs 광검출기의 특성을 평가하였다. 구성된 분광복사휘도 측정 장치의 파장 영역은 250~2500nm이며, 1.0 $\mu$A 이하의 신호에서 비선형 감응도가 0.1% 이하로 선형성이 우수하므로 분광복사휘도의 국가 표준 장치로 사용될 수 있음을 알 숭 있었다.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.192-200
• /
• 2024

Wheat stripe rust, caused by Puccinia striiformis, has reduced winter wheat yield globally for ages. In this work, multi-spectral Mueller matrix imaging with 37 measurements using the method of double rotatable quarter-wave plates was used to investigate wheat stripe rust. Individual Mueller matrix measurements were performed on incident monochromatic light with nine bands in the range of 430 to 690 nm. As a result, it was found that the infected area absorbed linearly polarized light and was sensitive to circularly polarized light in the spectral domain. Both linear depolarization and linear diattenuation images distinguished between wheat stripe rust and healthy tissue. The responsiveness of stripe rust to polarized light reveals the potential of using polarization imaging to detect plant diseases. This further suggests that the multi-spectral Mueller matrix imaging system provides us with an alternative approach to agricultural disease detection.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.291-303
• /
• 2019

In the paper the analysis of natural vibrations of the transmission line with use of spectral elements and the laboratory experiments is performed. The purpose of the investigation is to analyze the natural vibrations of the transmission line and compare with the results obtained in the numerical simulations. Particular attention is paid to the hysteretic and aerodynamic damping analysis. Sensitivity of the wave number is performed for changing of the tension force, as well as for the different damping parameters. The numerical model is made using the Spectral Element Method. In the spectral model, for various parameters of stiffness, damping and tension force, the system response is checked and compared with the results of the accelerations obtained in the measurements. A frequency response functions (FRF) are calculated. The credibility of the model is assessed through a validation process carried out by comparing graphical plots of FRF and time history analysis and numerical values expressing differences in acceleration amplitude (MSG), phase angle differences (PSG) and differences in acceleration and phase angle total (CSG) values. The next aspect constituting the purpose of this paper is to present the wide possibilities of modelling and simulation of slender conductors using the Spectral Element Method. The obtained results show good accuracy in the range of both experimental measurements as well as simulation analysis. The paper emphasizes the ease with which the sensitivity of the conductor and its response to changes in density of spectral mesh division, tensile strength or material damping can be studied.

• Agricultural and Biosystems Engineering
• /
• 제7권1호
• /
• pp.27-41
• /
• 2006

Assessment of nitrogen and chlorophyll content from crop leaves can help growers adjust N fertilizer rates to meet the demands of the crop. Numerous researchers have presented their studies about spectral signature of plant leaves to characterize the plant features. However, interrelational review and summary were limited and a communication gap exists between the plant science and optical engineering. Understanding the mechanism of leaf interaction to electromagnetic radiation and factors affecting spectrophotometric measurements can enhance the foundation of optical remote sensing technologies. This paper provides extensive review of previous works in optical sensing and explains the basics of plant optics, spectral measurements for plant stress, factors that affect sensitivity to spectral analysis, and applications that deploy optical remote sensing technologies.

• 한국포장학회지
• /
• 제12권1호
• /
• pp.21-25
• /
• 2006

Measurements of accelerometer levels transmitted from the floor in commercials truck shipments were carried out transportation of 300 Kg-load from Gyungbu Highway(Waegouan-Seoul) to 88 Highway(Gwangju-Daegu). Different characteristics were observed the values measured the vibration levels with directions in the two Highway's as a function of road condition and truck speed. The results showed that the vibration levels of the Gyungbu Highway is much higher than those of the 88 Highway. A following analysis on the obtained values was used to get the acceleration spectral density (ASD) and power spectral density (PSD). For the entire transit route, the results showed that the level of vibration to vertical direction was significant effects for damaging the products carried compared to other directions such as longitudinal and transverse. This paper provides an updated history of measured characteristics of vibration levels for highways using mainly in domestic area.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.103-108
• /
• 2011

Recently reported asynchronous-optical-sampling terahertz (THz) time-domain spectroscopy enables high-resolution spectroscopy due to a long time-delay window. However, a long-lasting tail signal following the main pulse is often measured in a time-domain waveform, resulting in spectral fluctuation above a background noise level on a high-resolution THz amplitude spectrum. Here, we adopt the wavelet power spectrum estimation technique (WPSET) to effectively remove the spectral fluctuation without sacrificing spectral features. Effectiveness of the WPSET is verified by investigating a transmission spectrum of water vapor.

• 한국농공학회논문집
• /
• 제51권3호
• /
• pp.37-43
• /
• 2009

The objective of this study was to investigate the basic relationships between spectral reflectance and varying concentrations of sediment in surface waters. An experimental method for determining suspended sediment concentration (SSC) in the water by use of a spectroradiometer above the water surface, in visible and near-infrared (NIR) wavelengths, is applied. The main advantage of the method is the direct comparison of spectral reflectance and the SSC, but it requires an accurate knowledge of the water body and sediment. Therefore numerous spectroradiometric measurements are carried out in situ measurements, for SSC, ranging from zero to 100 percentage and two types of sediment applied in the water tank. The results indicate that the suspended sediment causes increasing spectral reflectance response in waters. We observed that spectral reflectance increases with SSC, first at the lower wavelengths (430-480 nm), then in the middle wavelengths (570-700 nm), and finally, in the NIR domain (800-820 nm); a characteristic maximum reflectance appears at 400-670 nm. Relationships between the wavelength, integral value, and the SSC were evaluated on the basis of the regression analysis. The regression curve for the relation between the wavelength, integral value, and the SSC were determined ($R^2$>0.98). Finally, the specular wavelength can be estimated to recognize the sediment and to improve SC estimation accuracy in the water.

• East Asian mathematical journal
• /
• 제37권3호
• /
• pp.295-305
• /
• 2021

In this paper, we analyze the efficiency of a domain decomposition method for the two-dimensional telegraph equations. We formulate the theoretical spectral radius of the iteration matrix generated by the domain decomposition method, because the rate of convergence of an iterative algorithm depends on the spectral radius of the iteration matrix. The theoretical spectral radius is confirmed by the experimental one using MATLAB. Speedup and operation ratio of the domain decomposition method are also compared as the two measurements of the efficiency of the method. Numerical results support the high efficiency of the domain decomposition method.

• 말소리와 음성과학
• /
• 제6권2호
• /
• pp.47-54
• /
• 2014

The purpose of this study was to analyze spectral versus cepstral measurements in esophageal speakers. The comparison between the measurements in thirteen male esophageal speakers was compared with the control group of thirteen normal speakers using the sustained vowel /a/. The main results can be summarized as below: (a) the CPP and L/H ratio of the esophageal group were significantly lower than those of the control group (b) the CPP was significantly correlated with the spectral parameters such as jitter, shimmer, NHR and VTI, and (c) the ROC analysis showed that the threshold of 10.25dB for the CPP achieved a good classification for esophageal speakers, with 100% perfect sensitivity and specificity. Thus, it was known that cepstral-based acoustic measures such as CPP, may be more reliable predictors than other spectral-based acoustic measures such as jitter and shimmer. And it was found that cepstral-based acoustic measures were effective in distinguishing esophageal voice quality from normal voice quality. This research will contribute to establishing a baseline related to speech characteristics in voice rehabilitation with laryngectomees.

• 대한원격탐사학회지
• /
• 제17권2호
• /
• pp.131-139
• /
• 2001

Extraction of waterline in tidal flat has been one of the main concerns in the remote sensing of coastal region. This study aimed to define the spectral characteristics of turbid water near the shoreline and to find the appropriate spectrum to delineate the waterline at the inter-tidal flat in the western coast of Korean Peninsula. Spectral reflectance curves were obtained by the field measurements under the diverse condition of water depth and turbidity at the study area in Kyong-gi Bay. Spectroscopy measurements showed that reflectances of the exposed mudflat, shallow turbid water, and normal coastal water were significantly different by wavelength. Shallow water near the waterline showed diverse conditions of turbidity. Spectral reflectance tends to increase as turbidity increases, particularly at the visible and near infrared spectrum. At the middle infrared wavelength, tidal water showed very little reflectance regardless of the turbidity and water depth and was easily disting from the exposed tidal flat. The exact waterline between exposed tidal flat and seawater should be extracted from the image data obtained at the middle infrared wavelength.