• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.49-58
• /
• 2019

The effect of microstructure on the permeability of two saturated marine clays was studied through a series of falling head permeability tests and mercury intrusion porosimetry (MIP) tests. The key findings from this experimental study include the following results: (1) The permeability of undisturbed specimens is larger than that of reconstituted specimens at the same void ratio due to different soil fabrics, i.e., the pore size distributions (PSDs), even though they have the similar variation law in the permeability versus void ratio. (2) Different permeabilities of undisturbed and reconstituted specimens at the same void ratio are mainly caused by the difference in void ratio of macro-pores based on the MIP test results. (3) A high relevant relation between $C_k$ ($C_k$ is the permeability change index) and $e*_{10}$, can be found by normalizing the measured data both on undisturbed or reconstituted specimens. Hence, the reference void ratio $e*_{10}$, can be used as a reasonable parameter to identify the effect of soil fabric on the permeability of saturated soft clays.

• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.333-340
• /
• 2012

경량골재 콘크리트의 압축강도에 대한 크기 및 형상효과를 평가하기 위하여 9 배합의 실내 실험과 3 배합의 레미콘 배합을 수행하였다. 콘크리트 배합은 보통중량, 전경량 및 모래경량의 3그룹으로 분류되었다. 각 콘크리트 배합에서 원형 또는 사각형 단면을 갖는 시험체의 형상비는 1.0과 2.0이었다. 시험체의 단면 크기는 각 실내배합에서는 50~150mm, 각 레미콘 배합에서는 50~400mm 범위에 있었다. 실험 결과 경량골재 콘크리트의 균열진전과 국부 파괴영역은 보통중량 콘크리트와 상당히 달랐다. 경량골재 콘크리트에서 균열은 골재를 관통하였으며, 균열의 분포영역은 매우 국부적이었다. 이로 인해, 경량골재 콘크리트의 크기효과는 보통중량 콘크리트에 비해 더 크게 나타났으며, 이 현상은 형상비 1.0보다는 2.0인 시험체에서 더 뚜렷하게 나타났다. 김진근 등의 크기효과 예측모델은 경량골재 콘크리트에서 시험체 단면크기가 150mm 이상일 때 과대 평가하였다. 반면, 압축강도에 대한 시험체 형상의 영향을 보정하기 위해 ASTM 및 CEB-FIP에서 제시한 수정계수는 경량골재 콘크리트에서도 안전측에 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.508-511
• /
• 2004

This study focused on the effect of autonomic microcapsules on the mechanical properties of structural material. Several types of microcapsules with healing agents were manufactured by varying agitation speed of high speed stirrer. The size distribution of microcapsules was measured by a particle size analzer. The epoxy specimens embedded with microcapsules were manufactured and the degree of cure of such epoxy specimen was measured by a differential scanning calorimetry. The tensile modulus and tensile strength in epoxy specimens embedded with microcapsules were evaluated in order to investigate the effects of microcapsules on mechanical properties of structural materials. The configuration of microcapsules and morphology of fracture surfaces for the epoxy specimen were examined by an optical microcope and a scanning electron microscope. According to the results, tensile strength of the epoxy specimen embedded with microcapsules was indicated a little reduction, but tensile modulus was not much affected on microcapsules.

• 한국분말재료학회지
• /
• 제5권2호
• /
• pp.133-138
• /
• 1998

The effect of $\beta$-$Si_3N_4$ seeding on microstructural development of silicon nitride based materials has been investigated. In particular, to observe more distinctly the abnormal grain growth in pressureless sintering, fine $\alpha$-$Si_3N_4$(mean particle size: 0.26 ${\mu}m$) powder classified by sedimentation method was used. It was possible to prepare silicon nitride with abnormally grown grains under low nitrogen pressure of 1 atm thanks to the heterogeneous nucleation on $Si_3N_4$ seed particles. The size and morphology of silicon nitride grains were strongly influenced by the presence of $\beta$-$Si_3N_4$ seed and overall chemical composition. For specimens with initially low $\beta$-content, the large grains grew without a significant impingement by other large grains. On the contrary, for specimens with initially high $\beta$-content, steric hindrance was effective. The resulting microstructure was less inhomogeneous and characterized by unimodal grain size distribution.

• 한국수산과학회지
• /
• 제39권4호
• /
• pp.357-362
• /
• 2006

The feeding habits of John Dory (Zeus faber) were studied by examining the stomach contents of 317 specimens collected from January 2004 to December 2005 in the coastal waters off Gori, Korea. The standard length (SL) of the specimens ranged from 12 to 42 cm. Z. faber is a piscivore and consumes mainly teleost fish such as Psenopsis anomala, Trichiurus lepturus and Conger myriaster. Its diet also includes shrimp and cephalopods. Smaller individuals (<25 cm SL) consume shrimp and small fish such as Glossanodon semifasciatus. The proportion of these prey items decreases with increasing fish size, and this decrease is paralleled by increased consumption of lager fish such as Psenopsis anomala and Trichiurus lepturus. The prey size increases with Z. faber size.

• 한국수산과학회지
• /
• 제41권1호
• /
• pp.26-31
• /
• 2008

The feeding habits of chub mackerel (Scomber japonicus) were studied based on an examination of the stomach contents of 512 specimens collected between November 2005 and October 2006 in the South Sea of Korea. The specimens ranged in fork length (FL) from 23.4-37.5 cm. Chub mackerel is a piscivore and consumes mainly Teleosts such as Engraulis japonicus. Its diet also includes amphipods, crabs, Euphausia, chaetognaths and shrimp. Smaller individuals (<26 cm FL) consume mainly crabs. The proportion of these prey items decreases with increasing fish size, and this decrease paralleles the increased consumption of fish. The prey size increases with S. japonicus size.

• 한국농공학회지
• /
• 제45권3호
• /
• pp.50-58
• /
• 2003

Due to the economic growth and the improvement of life standards in the country, the quantities of waste glasses have been yearly increased. About 65% of them are recycled and the rest are reclaimed. The reclaimed waste glasses can cause some problems such as the environmental pollution as well as the processing cost of them. Thus, the purpose of this experimental research is to investigate the properties of mortar using powdered waste glasses(PWG) as a cementitious materials in mortar to recycle the reclaimed waste glasses For this purpose, the workability and strength of mortar specimens using PWG have been tested and analyzed in various grain size of them by changing the replacement ratio. As a result, considering the workability and strength of mortar specimens using PWG, it is concluded that the optimum grain size and replacement ratio of them will be existing.

• 한국수산과학회지
• /
• 제47권6호
• /
• pp.895-900
• /
• 2014

The feeding ecology of Doederleinia berycoides from the southern sea of Korea was examined. Specimens were caught monthly from January 2007 to June 2008. The size of the specimens ranged from 6.8 to 39.8cm in total length (TL). The primary prey items of D. berycoides included fishes and shrimps. In autumn, feeding mainly crustacea and fishes feeding mainly in winter. The individuals of smallest size class (less than 15 cm TL) fed mainly on crustacea. The proportion of crustacea decreased as body size increased, whereas the consumption of fishes increased. Fishes accounted for almost (86%) stomach contents of larger individuals (more than 35 cm TL).

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1308-1315
• /
• 1998

Effects of particle size of alumina on densification behavior during liquid-phase sintering of alumina-talc system were investigated with emphasis on particle rearrangement process. In the case of using coarse alu-mina powder densiication of specimens was rapidly accelerated after formation of liquid phase due to easy particle rearrangement process with addition of talc and increase of sintering temperature. On the contrary when fine alumina powder was used premature densification of alumina matrix region formed before for-mation of liquid phase rigid skeleton structure and then it seemed to inhibit rearrangement process during crease of sintering temperature. As results the densification of specimens using coarse alumina powder was higher than that of the case of using fine one.

• Journal of Magnetics
• /
• 제11권3호
• /
• pp.103-107
• /
• 2006

In grain oriented electrical steel process, hot band annealing has thought to be essential for obtaining good magnetic properties. New hot rolling method of heavy reduction in early hot rolling stage was applied to obtain good magnetic properties in GO process without hot band annealing. Hot rolling was carried out by varyinghot rolling reduction distribution along hot rolling pass. The heavy hot rolling reduction in rear stand improves the magnetic flux density in the case of no hot band annealing. The hot band specimens of the heavy reduction in front stand shows the elongated hot deformed microstructures in the center layer and strong {001}<110> texture.On the contrary, the heavily reduced specimens in rear stand shows the recrystallization in the center layer of hot band and strong {111}<112> and {110}<001> textures.